សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 31 ខែតុលា ឆ្នាំ 2024 - ម៉ោង 05:25 ព្រឹក
ដើម្បីភ្ជាប់ ម៉ាស៊ីនស្កេនមីក្រូហ្វីលថតដោយម៉ាស៊ីន MIC 7 ទៅកាន់កុំព្យូទ័ររបស់អ្នក សូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Ensure that your computer meets the minimum system requirements, which include having Windows XP as the operating system.
2. Locate the USB cable included in the box. This cable will be used to establish the connection between the scanner and your computer.
3. ភ្ជាប់ចុងម្ខាងនៃខ្សែ USB ទៅនឹងរន្ធ USB នៅលើម៉ាស៊ីនស្កេន។ ច្រក USB ជាធម្មតាមានទីតាំងនៅខាងក្រោយ ឬចំហៀងនៃម៉ាស៊ីនស្កេន។
4. Connect the other end of the USB cable to an available USB port on your computer. Make sure to use a USB port that is compatible with the scanner and is functioning properly.
5. Once the USB connection is established, your computer should recognize the scanner as a new device. It may prompt you to install any necessary drivers or software. Follow the on-screen instructions to complete the installation process.
6. Once the installation is complete, you should be able to access the scanner from your computer. You can use the provided software or any compatible scanning software to control the scanner and digitize microfilm content.
For more detailed instructions and troubleshooting tips, refer to the user manual provided with the Micro-Image Capture MIC 7 Motorized Microfilm Reader Scanner. The manual contains step-by-step instructions and illustrations to guide you through the setup process.
បន្ថែមមតិយោបល់ថ្មី។