សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ថ្ងៃទី 08 ខែមិថុនា ឆ្នាំ 2024 - ម៉ោង 04:38 ព្រឹក
To set the timing function on the Tekemai TC891-8 Timing Function Multicolor Lightសូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Ensure that the light is turned on and functioning properly.
2. Locate the remote control that came with the light.
3. Press the "Timer" button on the remote control. This will activate the timing function.
4. Use the arrow buttons on the remote control to set the desired time for the light to turn on. Press the "OK" button to confirm the selection.
5. Use the arrow buttons again to set the desired time for the light to turn off. Press the "OK" button to confirm the selection.
6. The timing function is now set. The light will automatically turn on and off at the specified times.
Please note that the timing function can be adjusted and reset as needed using the same steps outlined above. Refer to the user manual for any additional information or troubleshooting tips regarding the timing function.
បន្ថែមមតិយោបល់ថ្មី។