សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ឧសភា 30, 2024 - 01:38 AM
ដើម្បីជំនួសថ្មនៅក្នុងឡ Reyke 80dB+ RF Item Locator Key Finderសូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Locate the receiver that needs a battery replacement. Each receiver requires 4 x CR2032 batteries.
2. Use a small screwdriver or similar tool to remove the xxxx on the back of the receiver.
3. Open the battery compartment by sliding the cover off.
4. យកថ្មចាស់ចេញ ហើយបោះចោលវាឱ្យបានត្រឹមត្រូវ។
5. Insert 4 new CR2032 batteries into the battery compartment, ensuring the correct polarity (+/-) alignment.
6. រំអិលគ្រមបថមថមចូលនឹងកន្លែង។
7. Secure the xxxx on the back of the receiver to close the battery compartment.
8. Repeat these steps for any other receivers that require battery replacement.
សូមមើលសៀវភៅណែនាំអ្នកប្រើប្រាស់សម្រាប់ការណែនាំដែលមើលឃើញ និងព័ត៌មានបន្ថែមអំពីការជំនួសថ្ម។
Note: The transmitter of the Reyke 80dB+ RF Item Locator Key Finder requires 2 x AAA, 1.5V batteries. If you need to replace the batteries in the transmitter, follow the same steps mentioned above, but ensure you use AAA batteries instead of CR2032 batteries.
If you encounter any difficulties or have further questions, please refer to the user manual or contact Reyke Technologies at support@reyke.com or 1-800-REYKE-HELP for assistance.
បន្ថែមមតិយោបល់ថ្មី។