សៀវភៅណែនាំអ្នកប្រើប្រាស់ សំណួរ និងចម្លើយចម្លើយ
ឧសភា 09, 2024 - 03:45 AM
To change the default master code on the TeeHO TE002 គ្រាប់ចុច Deadbolt ជាមួយស្នាមម្រាមដៃសូមអនុវត្តតាមជំហានទាំងនេះ៖
1. Ensure that the lock is installed and the batteries are inserted.
2. Press the reset button located on the interior assembly of the lock.
3. Take out one battery and then place it back in while still holding the reset button.
4. Continue holding the reset button for 3 seconds until you hear a beep sound.
5. លែងប៊ូតុងកំណត់ឡើងវិញ។
6. Enter the default master code "12345678" on the keypad.
7. Press the "#" button.
8. Enter a new master code of your choice using 4 to 10 digits.
9. Press the "#" button to confirm the new master code.
10. The master code has now been successfully changed.
Please refer to the product manual for more detailed instructions and illustrations if needed.
បន្ថែមមតិយោបល់ថ្មី។