INSTALLATION

REFER TO YOUR CAR STEREO OWNER'S MANUAL

Section A: Door Panel Mounting

A: Illustration showing a car door panel with a speaker cutout.

A1: Close-up of a speaker mounting bracket designed to fit the car's door panel.

A2: Diagram showing the DS18 SLC-N69X speaker being inserted into the car door cutout.

A3: Illustration of the speaker fully mounted in the car door, with a protective grille cover attached.

Section B: Rear Deck/Trunk Mounting (General)

B: Illustration showing a car's rear deck or trunk area with potential speaker mounting locations.

B1: Diagram showing the speaker being placed into a pre-cut hole in the mounting surface.

B2: View from underneath the mounting surface, showing the speaker secured in place.

B3: Illustration detailing the speaker wire connections to the vehicle's audio system.

Section C: Speaker Assembly with Adapter

C: Diagram showing the speaker and a mounting adapter or enclosure.

C1: The speaker being placed into a mounting adapter, preparing for attachment.

C2: Screws being used to secure the speaker to the adapter or enclosure.

C3: The assembled speaker unit, with an arrow indicating upward orientation, ready for installation.

Section D: Rear Deck Mounting (Specific)

D: Illustration of a car's rear deck with speaker mounting locations.

D1: Diagram showing the speaker being positioned in a cutout on the rear deck.

D2: Illustration of speaker wire connections to the rear deck speaker location.

D3: Tools and screws required for mounting the speaker to the rear deck.

D4: Screws being used to fasten the speaker securely to the rear deck.

D5: The speaker fully installed and mounted on the car's rear deck.

LIKE IT LOUD Logo: [Facebook] [Instagram] [Twitter] [YouTube] [TikTok]

Specifications

Woofer

Tweeter

Measurements