Genmitsu PROVerXL 6060 Extension Hybrid Spoilboard Installation Guide
English Installation Guide
Package List
| Item | Quantity | Item | Quantity |
|---|---|---|---|
| Aluminum & MDF Hybrid Slat | 7 x | M5*20 T-Nut | 28 x |
| M5*8 Hex Screw | 28 x | 4mm Wrench | 1 x |
| M5*16 Hex Screw | 28 x | Manual | 1 x |
[Image Description: A diagram showing the Genmitsu PROVerXL 6060 CNC machine with an inset illustrating the attachment of aluminum and MDF hybrid slats to the machine's frame using screws and T-nuts.]
Installation Instructions (No Pre-drilled Holes)
If the frame of your PROVerXL CNC machine doesn't have the screw holes, install the M5*8 Hex Screws and M5*20 T-Nuts on each screw hole of the slats at first (don't lock them tightly, just need to screw 2-3 turns). Then, arrange the aluminum & MDF hybrid slats on the frame of your CNC machine and make sure that the T-Nuts are inserted in the frame, then lock them tightly.
[Image Description: A close-up view illustrating the insertion of an M5*8 Hex Screw and an M5*20 T-Nut into the frame of the CNC machine.]
Installation Instructions (With Pre-drilled Holes)
If the frame of your PROVerXL CNC machine has the screw holes, arrange the aluminum & MDF hybrid slats and align the screw holes of the slats with the screw holes on the frame. Tighten them with M5*16 Hex Screws.
If you need any assistance, please contact us via:
? Email: support@sainsmart.com
? Facebook Messenger: https://m.me/SainSmart
Help and support is also available from our Facebook Group.
German Installation Guide (Translated)
Genmitsu PROVerXL 6060 Worktop Extension Assembly Instructions
Scope of Delivery (Lieferumfang)
| Item | Quantity | Item | Quantity |
|---|---|---|---|
| Aluminum & MDF Hybrid Slat | 7 x | Assembly Instructions | 1 x |
| M5*20 mm T-Nut | 28 x | 4mm Wrench | 1 x |
| M5*8 mm Hex Screw | 28 x | ||
| M5*16 mm Hex Screw | 28 x |
[Image Description: A diagram showing the Genmitsu PROVerXL 6060 CNC machine with an inset illustrating the attachment of aluminum and MDF hybrid slats to the machine's frame using screws and T-nuts.]
Assembly Instructions (No Pre-drilled Holes)
If the frame of your PROVerXL CNC machine does not have screw holes, first install the M5*8 mm Hex Screws and M5 T-Nuts into each screw hole of the slats (do not tighten them fully, just screw them in 2-3 turns). Then, place the aluminum and MDF hybrid slats onto the frame of your CNC machine and ensure the T-Nuts are inserted into the frame, then tighten them securely.
[Image Description: A close-up view illustrating the insertion of an M5*8 Hex Screw and an M5 T-Nut into the frame of the CNC machine.]
Assembly Instructions (With Pre-drilled Holes)
If the frame of your PROVerXL CNC machine has screw holes, arrange the aluminum and MDF hybrid slats and align the screw holes of the slats with the screw holes on the frame. Tighten them with M5*16 mm Hex Screws.
If you need assistance, please contact us via:
? Email: support@sainsmart.com
? Facebook Messenger: https://m.me/SainSmart
Help and support are also available in our Facebook group.
