Mooas Moonlight Dual LED Clock (Date Ver.) User Manual

Introduction

Thank you for purchasing the Mooas Moonlight Dual LED Clock (Date Ver.). This manual provides instructions on its features, setup, and operation.

Product Features

• Dual LED display for time and date (Month/Day).
• Integrated 7-color mood lamp with adjustable brightness.
• Includes a convenient remote control for operation.
• Magnetic storage for the remote control on the clock unit.
• Supports 12/24 hour time format.

Package Contents

• Mooas Moonlight Dual LED Clock (Main Unit)
• Remote Control
• User Manual
• Power Adapter (Assumed, not explicitly detailed in OCR)

Remote Control Overview

The remote control allows for easy adjustment of clock settings and features.

Key Buttons and Functions:

• SET Button: Used to enter setting modes for time, alarm, and date.
• UP/DOWN Buttons: Adjust values (hours, minutes, brightness, etc.) and navigate settings.
• MODE/COLOR Button: Cycles through the 7 available mood lamp colors. Press and hold to adjust brightness.
• ALARM Button: Activates alarm setting mode.
• SNOOZE Button: Activates the snooze function when an alarm is sounding.

Diagram Description: A diagram illustrates the layout of the remote control buttons, showing their placement and corresponding functions.

How to Set

Setting the Time (12/24 Hour Format)

1. Press the SET button. The hour digits will flash.
2. Use the UP/DOWN buttons to select the desired hour.
3. Press SET again. The minute digits will flash.
4. Use the UP/DOWN buttons to select the desired minute.
5. Press SET again to confirm. The time is now set.
6. To toggle between 12-hour and 24-hour formats, press and hold the UP button while in time display mode.

Diagram Description: A visual guide shows the sequence of pressing SET and UP/DOWN buttons to adjust the hour and minute.

Setting the Date (Month/Day)

1. Press the SET button multiple times until the date display flashes (or press a dedicated date button if available).
2. Use the UP/DOWN buttons to select the desired month.
3. Press SET again. Use the UP/DOWN buttons to select the desired day.
4. Press SET again to confirm.

Diagram Description: A diagram illustrates the process of setting the month and day using the clock's buttons or remote.

Setting the Alarm

1. Press the ALARM button. The alarm time digits will flash.
2. Use the UP/DOWN buttons to set the desired alarm hour.
3. Press ALARM again. Use the UP/DOWN buttons to set the desired alarm minute.
4. Press ALARM again to confirm. The alarm is now set and will activate at the specified time.

Diagram Description: A visual representation of the alarm setting procedure.

Mood Lamp and Brightness Adjustment

• Press the MODE/COLOR button to cycle through the 7 available LED colors (e.g., blue, green, red, etc.).
• To adjust the brightness of the mood lamp, press and hold the MODE/COLOR button. Use the UP/DOWN buttons to increase or decrease brightness.

Diagram Description: Swatches of different colors are shown, along with an illustration of how to adjust brightness.

Luminance Adjustment (Clock Display)

The clock display brightness can also be adjusted. Use the dedicated brightness adjustment buttons on the remote or the UP/DOWN buttons when in a relevant mode.

Diagram Description: A diagram shows how to adjust the overall luminance of the clock display.

How to Use

Alarm Stop and Snooze

• When an alarm sounds, press any button except the SET button to stop it for the current cycle.
• To activate the snooze function, press the SNOOZE button when the alarm sounds. The alarm will stop temporarily and sound again after a short interval (e.g., 5-10 minutes).

Diagram Description: An illustration depicts the alarm sounding and the options to stop or snooze.

Remote Control Storage

The clock unit features magnets on its front and back stands, allowing you to conveniently attach and store the remote control.

Diagram Description: A diagram shows the remote control magnetically attached to the clock unit.

Precautions

• Do not stretch, bend, or damage the power cord.
• Use only the provided power adapter.
• Keep the device away from water and moisture.
• Do not attempt to disassemble or repair the unit yourself.
• Avoid placing the clock in direct sunlight or extreme temperature conditions.
• Ensure proper ventilation around the unit.

Diagram Description: Icons representing warnings, such as "Do not immerse in water" or "Handle with care."

Printing and Size Information

How to print: Printing on both sides of the paper / Saddle Stitch.

Full Size: 266 x 170mm.

Diagram Description: A diagram illustrates saddle stitch binding and shows the dimensions of the printed document.