MODify Nesting Table 01

About MODify Nesting Table 01

MODify™ is a unique Modular Merchandising System composed of interchangeable fixtures and accessories. It allows for effortless assembly, disassembly, and rearrangement to create diverse display configurations. The system features SEG (Silicone Edge Graphic) push-fit fabric graphics, enabling seamless branding, promotion, and merchandising.

The MODify Nesting Table 01 is an ideal addition to any space. Its robust metal frame offers excellent support and stability, complemented by elegant wooden tabletops that bring warmth and sophistication. SEG push-fit fabric graphics are available for each side, providing a creative avenue for displaying branding, messaging, and colors. The MODify Nesting Table 01 is designed to nest over Nesting Table 02, enhancing versatility, while its sleek design makes it suitable for any environment.

Features and Benefits

• Dimensions: 56"W x 36"H x 30"D
• Leg frames available in silver, white, and black
• Wood tops available in white, black, natural, or gray wood grain laminate
• Optional SEG push-fit graphic for each side

Specifications

Dimensions

Assembled Unit: 56"W x 36"H x 30"D (1422.4mm(w) x 914.4mm(h) x 762mm(d))

Approximate Weight: 59 lbs / 26.7619 kg

Shipping

Packing Case(s): 1 Box

Shipping Dimensions: (60" L x 6" H x 36"D) (1524mm(l) x 152.4mm(h) x 914.4mm(d))

Approximate Shipping Weight: 70 lbs / 31.7515 kg

Graphics

Graphic Material: Dye-sublimated fabric

See graphic templates for graphic sizes.

Refer to related graphic templates for more information:

? https://www.theexhibitorshandbook.com/downloads/download-graphic-templates or click here ?

Additional Information

Powder Coat Color Options:

White, Black, Silver, Gray

Wood Laminate Color Options:

White, Black, Natural, Gray

Tools Required

• MULTI HEX KEY [Included ✔️]
• PHILLIPS SCREW DRIVER [Not Included ❌]

Assembly Instructions

Assemble Frame

Step 1: Lock Top 2 Horizontal Extrusions to Leg

Note: Locks are along the bottom edge.

Use the 5mm Allen key to lock the extrusions.

Diagram showing the assembly of the table frame. It illustrates two vertical support frames and two horizontal support bars. Arrows indicate that the horizontal bars are attached to the vertical frames using cam locks. A warning symbol ⚠️ is shown next to text advising to turn locks only a half turn to prevent over-torquing.

Step 2: Bolt Horizontal Support Bar to Left & Right Frame

Secure the horizontal support bar to the left and right frames as shown.

Diagram showing the partially assembled frame with the horizontal support bar being attached to the left and right frames using bolts.

Install Counter Top

Step 3: Fasten Counter Top to Side Frames

Attach the counter top to the side frames using eight wood screws, secured through pre-mounted L-brackets.

Diagram showing the installation of the tabletop. The tabletop is positioned above the assembled frame. Arrows indicate that the tabletop is secured to the side frames using eight wood screws through pre-mounted L-brackets. A "FRONT VIEW" inset shows the underside of the tabletop attachment detail.

Install Graphics

Step 4: Prepare Graphics

Graphics are dye-sublimated fabric, single-sided, sewn with FCE-2 silicone beading along the perimeter and a pull tab in the bottom right corner. The total size is 30.50"W x 35.23"H, with a finished size of 26.50"W x 31.23"H.

Diagram illustrating the installation of SEG fabric graphics. It shows the fabric panels with silicone beading along the edges and pull tabs. Arrows indicate that the beading is pressed into the frame channels along the perimeter of the table.

Step 5: Press Graphics into Frame

Press the silicone beading of the graphics along the perimeter edge of the frame.

Diagram showing the table with graphics being installed. The fabric graphics are being pushed into the frame channels along the perimeter.

Bill of Materials

Kit Hardware BOM

Kit Graphics BOM