Tecware Q3 Wireless Gaming Headset
Quick Start Guide
Key Function
A diagram of the Tecware Q3 headset illustrates its key components. Labeled parts include the Volume Switch, Mode Switch, Power Switch, Microphone (retractable), Charging Port / Audio Jack, and LED Indicator.
| Function | Action |
|---|---|
| Volume Switch | Adjust the Volume Up or Down |
| Mode Switch | Press 1 time: Toggle between Music / Game Mode Press 2 times (quickly): Toggle between Bluetooth / Dongle mode |
| Power Switch | Press 1 time: Play/Pause Press and hold for 3 seconds: Turn the headset On/Off |
| Microphone | Pull out to turn the Microphone On. Push in (hide) to turn the Microphone Off. |
Connectivity (Device Pairing)
The headset can be connected in 3 different ways:
- Connection via USB-C - 3.5mm Cable
- Connection via 2.4 GHz Wi-Fi (Dongle)
- Connection via Bluetooth
A diagram illustrates a Type-C to 3.5mm audio cable, with a USB Type-C connector on one end and a 3.5mm audio jack on the other.
Wired Connection (Plug and Play)
- Plug in the Type-C to 3.5mm Audio Cable to your headset and the Audio Jack on your device.
- Your headset is ready to use.
Connection via 2.4GHz Wi-Fi Dongle
- Plug in the USB dongle into your device.
- Turn the headset on by pressing and holding the power switch for 3 seconds. You should hear 'Dongle Mode, Pairing'. If you do not, press the 'M' button twice quickly.
- Once you hear 'Connected', your device has been paired and your headset is ready to use.
Connection via Bluetooth
- Turn on Bluetooth on your device.
- Turn the headset on by pressing and holding the power switch for 3 seconds. You should hear 'Bluetooth Mode, Pairing'. If you do not, press the 'M' button twice quickly, until you hear it.
- Search for Bluetooth device name NOS H-800 and select Connect. Then the headset can be used normally after you hear the tone "Beeps".
- Search for Bluetooth device name "Tecware Q3 Headset" select Connect.
- Once you hear 'Connected', your device has been paired and your headset is ready to use.
Charging
A diagram depicts a Type-C USB charging cable, featuring a USB Type-C connector on one end and a standard USB-A connector on the other.
- Plug in the USB-C to USB charging cable to your headset and your device or a power source.
- The headset will charge automatically. The blinking red LED indicator on the headset signifies that it is charging.
Package Contents
- 1x Tecware Q3 Headset
- 1x USB-C to USB Charging Cable
- 1x USB-C to 3.5mm Audio Jack Cable
- 1x 2.4GHz USB Dongle
Warranty
- 1 Year Warranty. Please contact your local distributor for support.
Caution!
- Do not place the machine in the sun, around wet areas or expose to rain.
- Prolonged use of the device at too high a volume may damage your hearing. In addition, the laws in some countries stipulate that the maximum allowable sound level is 86 dB and the maximum allowable use time is 8 hours per day, so it is recommended that you reduce the volume to a comfortable level when using the device for long periods of time.
- This product is not fireproof; please do not place/use flammable and explosive materials near it.
Care and Maintenance
- After each use, use a dry rag/paper towel, etc., to wipe off sweat stains and place in a dry place.