User Manual For Touch2 & Entune 2.0 System
For Touch2 & Entune 2.0 System
1. Function Description
CarPlay / Android Auto
The built-in vehicle machine interaction system of iPhone cooperates with the central control knob button to provide voice command and control of phone, information, navigation, music, to operate Siri voice interaction to obtain more information; Support wireless Carplay. The original ecological Android car-machine interaction system developed by Google, voice control of phone, information, navigation, music built-in voice control system.
Reversing Video Input
Smart module can decode video and can be equipped with rear-view video input. (The intelligent module can decode video and install rear view)
Airplay
Supports wireless Airplay for iPhone.
USB Music
Online music playback function, which can be directly inserted into the U disk music.
2. Product Information
Host unit (Size: 128*84*25mm)
- Power Cable
- USB Video Cable
- WiFi Antenna
3. Specifications
| Operating Voltage | 12 V |
| Operating temperature | -30~+75℃ |
| Stored temperature | -30~+85℃ |
| Environment humidity | <98% (at45°C) 65±5% (rated) |
| Power consumption | 1A (rated), 3A(Max) |
| Quiescent Current | less than 3mA |
| Shutdown current | 300mA (Clock is on) |
| Charging current | <2A, when the USB charging current>1A, the host should activate the circuit protection function to control the current below 1.5A, to avoid burning the product. |
4. Connection Diagram
The following connections are described:
- Connect with Original Car's Main Unit - 24PIN
- Connect with Original Car's Main Unit - 10PIN
- Connect with Original Car's Main Unit - 28PIN
- Connect with Original Car's Plug - 28PIN
- Connect with Original Car's Plug - 10PIN
- Connect with Original Car's Plug - 24PIN
- Forward Looking Input
- Camera Power Supply
- GND (Ground)
- USB Cable
- WiFi Antenna
5. Vehicle Dialing Table
| Model | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|
| Fujitsu Panasonic | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
| Pioneer | OFF | OFF | OFF | OFF | ON | OFF | OFF | OFF |
Note: All OFF by default; Applicable to Panasonic Fujitsu mainframes. 5-ON: Applicable to Pioneer mainframes.
6. Switch to CarPlay System
The product supports the original car system and there are three ways to switch to CarPlay interface:
- In the original car screen: First click on the [FM icon], then click on the [AUX icon] to enter.
- In the steering wheel: Long press the voice button [Voice button icon] to enter.
- If there is no voice button: Press the [MODE button icon] to enter.
7. Control Key Operation Instructions
Support touch screen control
The touch screen displays icons for:
- [Phone icon] Phone
- [Music icon] Music
- [Maps icon] Maps
- [Apps icon] Apps
- [Settings icon] Settings
- [HOME icon] HOME
Support original car button control
- [Volume Up button] Volume +
- [Volume Down button] Volume -
- [Previous Song button] Previous song
- [Next Song button] Next song
- [Answer Call button] Answer the phone
- [Hang Up Call button] Hang up the phone
- [Siri button] Short press to wake up Siri
- Long press 2s to switch CarPlay system
8. Wireless CarPlay connection
Follow these steps to connect wirelessly:
- Select "Bluetooth" ⚙️.
- Check the Bluetooth Device name as "CAR-BT-XXXX".
- Turn on WiFi ? and keep it on. Connect to the device named "CAR-WIFI-XXX" (password is 66668888).
- Select the Bluetooth Device name "CAR-BT-XXX", pair it, and confirm the CarPlay request when it appears.
9. Wireless Android Auto connection
Follow these steps to connect wirelessly:
- Select "Bluetooth" ⚙️.
- Check the Bluetooth Device name as "CAR-BT-xxxx".
- Click on the Bluetooth name starting with "CAR-BT-xxx". A pairing request will pop up; click "Pair". After successful Bluetooth pairing, the phone will prompt to enable the CarPlay option; confirm it.
- Click the Bluetooth name starting with "CAR-BT-xxx" and click pairing. Turn on the Android Auto app on the mobile phone, and the system will connect automatically.
10. Apple Wireless Screen Mirroring
Follow these steps for wireless screen mirroring:
- Select "Airplay" .
- Turn on the phone's "Wireless LAN" option. Search for "CAR-WIFI-XXX" and click the link. The password is 66668888.
- After the CarPlay WiFi connection is successful, return to the phone's main interface, open the shortcut menu, select "Screen Mirroring", and turn it on.
- After the mobile phone "Screen Mirroring" is turned on, select "Airplay" to complete the wireless Screen Mirroring.
11. Settings
Camera selection:
Select OEM Camera and Aftermarket Camera.
Resolution:
- Default regular resolution: 670*470
- Left and right display incomplete selection: Senna L/R not full 709*470
- RAV4 Corolla display leftward selection: RAV4 6" Left offset 670*470
Important Information
Dear users: We are Official Store. Thank you for choosing our products. Our products have passed strict functional and performance tests. All products enjoy a one-year warranty. Please feel free to use them.
The following regulations will not be covered by the free warranty service:
- 9.1 After the free warranty period, the appearance is scratched, dirty, and deformed.
- 9.2 The warranty card and purchase certificate are inconsistent with the product model or have altered marks.
- 9.3 The bar code of the host machine body is unclear or there is no bar code product.
- 9.4 Failure to use, maintain, repair, or refit according to the product manual causes damage.
- 9.5 Damage due to force majeure (such as fire, flood, traffic accident, lightning, earthquake, etc.).