M-VAVE Chocolate Wireless MIDI Pedal User Manual
Foreword
Thank you for purchasing our products! This product is a wireless MIDI pedal with APP control. It can also be used on a computer. This manual will introduce you in detail to the use of this product and some common problems encountered during use.
Chinese Foreword: 首先感谢您购买本公司的产品! 本产品是一个无线功能带APP控制的无线MIDI踏板,同时我们也可以在电脑上去使用它,我们将通过本说明书为您详细的介绍本产品的使用方法及使用中的一些常见的问 题。
Product Feature Introduction
- Portable midi pedal, small and exquisite.
- Charging for 2.5 hours, can be used for 12 hours.
- The display screen can directly feedback the commands you issued, intuitive and clear.
- WINDOWS, MAC, IOS, ANDROID and other platforms are all compatible.
- The built-in host interface allows for direct control of the effector.
- Advanced customization mode with switchable bank.
- Customization of keyboard combination keys.
Chinese Product Features:
- 便携式midi踏板,小巧轻便。
- 智能APP操控,操作简单,使用便捷。
- 充电2.5小时超长续航12小时。
- 显示屏能够直接反馈您发出的命令,直观清晰。
- WINDOWS, MAC, IOS, ANDROID多个平台均可使用。
Notice
Power supply:
Please make sure to use the correct 5V±10% power adapter to charge this product. The maximum working voltage must be less than 6V, otherwise it may cause equipment damage. Please turn off the device when you don't use this product.
Chinese Notice 1: 请确保使用正确的5V±10%电源适配器为本产品充电。最大工作电压必须小于 6V,否则可能会导致设备损坏。在不需要使用本产品或是雷雨天气时请关闭本 设备。
Electrical interference:
Such as radios, televisions, and electromagnetic waves may cause interference to the equipment, so please try to stay away from equipment with larger electromagnetic waves.
Chinese Notice 2: 收音机、电视机等电磁波可能会对设备造成干扰,因此请尽量远离电磁波较大 的设备。
Placement environment:
In order to prevent deformation, discoloration, and other damages to this product, please avoid the following environments:
- A. Heat source
- B. Magnetic field
- C. Direct sunlight
- D. High temperature and humidity
- E. High humidity
- F. Dusty or dirty place
- G. Strong vibration or shaking.
Chinese Notice 3: 为防止变形、变色和其他方面对本产品造成损坏,请避免以下情况:
- A.热源
- B.磁场
- C.阳光直射
- D.高温潮湿
- E.湿度较大
- F.多尘或者不洁地方
- G.强烈震荡或摇晃
Panel Description Introduction
The pedal features several components for control and connectivity:
- ① Foot switch A
- ② Combination E: Press foot switch A and B at the same time.
- ③ Foot switch B
- ④ Display screen
- ⑤ Foot switch C
- ⑥ Combination F: Press foot switch C and D at the same time.
- ⑦ Foot switch D
- ⑧ Type-C charging and data jack: Used for charging and data transfer.
- ⑨ Power switch: A toggle switch for powering the device on/off.
- ⑩ Wireless instruction light: Indicates wireless connection status.
- ⑪ Charging instruction light: Indicates charging status.
- ⑫ Pedal jack: For connecting external pedals.
- ⑬ Midi host: Allows connection to other MIDI devices.
Port Descriptions:
- U Interface (⑧): USB MIDI interface can be used to connect to a computer or other device. The Host interface (labeled USB) is invalid for this function.
- H Interface (⑨): This interface can only provide power. The Midi host interface (⑬) can be connected to other effectors for control.
Midi host (⑬): Integrating midisystem into chocolate allows for the connection of different devices, including standard five-core MIDI interface devices or USB MIDI interface devices. For detailed connection methods, please refer to the QR code on the back of the product.
Chinese Panel Description:
- ①踩钉A
- ②组合E (同时按下踩钉A和踩钉B)
- ③踩钉B
- ④显示屏
- ⑤踩钉C
- ⑥组合F (同时按下踩钉C和踩钉D)
- ⑦踩钉D
- ⑧Type-C充电及数据口
- ⑨电源开关
- ⑩无线指示灯
- ⑪充电指示灯
- ⑫踏板接口
- ⑬ Midi接口
Chinese Operation Instructions:
| Operation | Button/Instruction | Display |
|---|---|---|
| Power ON | Toggle switch ⑨ | ④ Display is on |
| Charging instruction | ⑧ Connect to the power supply | ⑪ Red light means charging; ⑪ Blue light means charging finished. |
| Wireless connection | Connect to the device name: footctrlplus | ⑩ Light is flashing means connection failed. Light is on and didn't flash means connection succeeded. |
| Wireless switch | Press and hold ③ footswitch B and ⑤ footswitch C for 3 seconds to turn on/off. | ⑪ Light on when turn on; ⑪ light off when turn off. |
For detailed operation, please scan the QR code on the back of the product to download the APP and user instructions.
Instructions
Please scan the QR code on the back of the product to download the APP and user instructions for detailed operation.
Technical Parameters
| Parameter | Value |
|---|---|
| Power Input | Standard 5V direct current |
| Average working current | 45mA |
| Battery Model/Type | 602030 |
| Battery capacity | 3.7V |
| Battery Nominal Voltage | 300mA |
| USB connection type | Type-C |
| Product size | 212(L)*36 (W) *17 (H) mm |
| Product weight | 280g |
| Size with box | 227(L)*55 (W) *35 (H) mm |
| Weight with box | 350g |
| Accessories | power cable x1 |
Chinese Technical Parameters:
| 技术参数 | 值 |
|---|---|
| 电源输入 | 标准5V直流电 |
| 平均工作电流 | 45mA |
| 电池型号规格 | 602030 |
| 电池容量 | 3.7V |
| 电池标称电压 | 300mA |
| USB连接类型 | Type-C |
| 产品尺寸 | 212(L)*36 (W) *17 (H) mm |
| 产品重量 | 280g |
| 成品尺寸(外包装) | 227(L)*55 (W) *35 (H) mm |
| 成品重量(带包装线材) | 350g |
| 配件 | 电源线x1 |
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
