HelloBaby HB6081 2.4GHz Digital Wireless Video Baby Monitor User Manual

1. Safety Instructions

CAUTION: Keep the device away from children.

Strangulation Hazard

Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9 m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.

Choking Hazard

This product contains small parts; please be careful when unpacking and assembling the product.

Read and Keep Instructions

All safety and operating instructions should be read before the video baby monitor is operated. This product cannot replace responsible adult supervision.

Water and Moisture

This product is designed for indoor use only. The unit should not be exposed to rain, moisture, dripping, or splashing. No objects filled with liquid should be placed on top of, or beside the product, such as a glass or vase. This item should not be used near water.

DO NOT

• Use the appliance if the cord or plug is damaged. If your baby monitor is not operating properly or has suffered any damage, contact “service@hellobaby.net.cn” service center for inspection and repair to avoid any possible risk.
• Attempt to repair or adjust any of the electrical or mechanical functions of the unit. Otherwise, the guarantee will be void.

Ventilation

This baby monitor should not be used on a bed, sofa, rug, or similar surface that may block ventilation openings, or be placed in an enclosed area such as a bookcase or drawer that may impede airflow.

Keep Away from Heat Sources

This unit should not be exposed to direct heat sources such as a candle, radiator, heat register, stove, or other appliance that emits heat. The unit should not be left in direct sunlight.

Power Source

This unit should only be used with the AC power adapters included in this package (rated 5V DC 1.2A).

Damage Requiring Service

This unit should be serviced by qualified personnel only when:

• Objects have fallen or liquid has been spilled into the product.
• The units have been exposed to rain.
• The units do not appear to operate normally or exhibit a distinct change in performance.
• The units have been dropped or the enclosure damaged.

2. Warranty Terms

HelloBaby offers a one-year warranty from the original purchase date against defects in workmanship and materials. For warranty or support issues, please contact the after-sales service via email at service@hellobaby.net.cn.

3. Installation Guidelines

To use your parent unit and camera unit together, you must establish a radio link between them. The range is affected by environmental conditions.

• Large metal objects (refrigerator, mirror, filing cabinet, metallic doors, reinforced concrete) between the baby and parent unit may block the radio signal.
• Signal strength may also be reduced by solid structures like walls, or by radio or electrical equipment such as TVs, computers, cordless or mobile phones, fluorescent lights, or dimmer switches.
• Use of other 2.4GHz products (wireless networks, Bluetooth systems, microwave ovens) may cause interference. Keep the baby monitor at least 5ft (1.5m) away from such products, or turn them off if they cause interference.

4. Placement of the Baby Monitor

The camera can be placed on a desktop or mounted on a wall. Do not place the baby monitor on soft quilts or blankets, or in corners of cupboards, shelves, etc. Keep the baby monitor away from heat sources like radiators, chimneys, cookers, and direct sunlight. Keep the baby unit away from TV sets, microwave ovens, and radios. If interference occurs, move the camera to a different location.

• Place the camera within 6 feet (2 meters) of the area being monitored for optimum performance.

5. Getting Started

5.1 Turn On the Baby Unit

1. Insert the DC plug of the power adapter into the DC jack in the rear of the Baby Unit.
2. Insert the other end of the power adapter into a suitable electrical outlet.
3. Once the adapter is connected, the power LED will light up.

5.2 Turn On the Parent Unit

1. Insert the DC plug of the power adapter into the DC jack on the side of the Parent Unit.
2. Insert the other end of the power adapter into a suitable electrical outlet.
3. Press and hold the power key [power] for 3 seconds on the back of the Parent Unit.
4. Once the parent unit is on, the power LED will light up, and the image will display on the LCD.

5.3 Infrared Night Vision (Automatic)

The infrared night vision function allows the camera to pick up images in dark or low-light conditions. In this mode, only black and white images will be displayed on the monitor. The optimum image is achieved when the baby unit is 6ft (2m) away from the object. When the camera is in night vision mode, the [night-vision] icon will be displayed on the top of the screen.

6. Product Overview

6.1 Icons Overview

• [signal-strength]
• [alarm]
• [lullaby]
• [camera]
• [volume]
• [temperature]
• [night-vision]
• [eco]
• [zoom]
• [two-way-talk]
• [battery-level]
• [time]

6.2 Parent Unit Overview

The parent unit features a 5.5" 720P TFT LCD display, [antenna], [power] key, [stand], [dc-jack], [speaker], [power-led] (Charging LED / Power LED), [sound-level] indicator, [volume/brightness] control, [two-way-talk]/[exit] key, [zoom]/[pan-tilt] control, [up] key, [menu]/[ok] button, [right] key, [down] key, [mic], [left] key, and [reset] key.

6.3 Baby Unit Overview

The baby unit includes a [mic], [light-sensor], [ir-leds], [lens], [power-led], [antenna], [speaker], [night-light], [pair-key], [dc-jack], [ant], [dv-5v] connection, [night-light-switch], and [temperature-sensor].

7. Key Operation

7.1 Turn On/Off

Press and hold the [power] key for 3 seconds to turn the Parent Unit on or off.

7.2 Two Way Talk / Exit Key

Press and hold the [two-way-talk] key to enter two-way talk mode. A microphone icon will be displayed on the LCD screen. Release the key to stop. When in two-way talk mode, the Parent Unit speaker is muted. This key also functions as the exit function.

7.3 Zoom

Press and hold the [zoom] key for 2 seconds to operate zoom in/out.

7.4 Volume and Display Brightness Adjustment

1. Press the [volume/brightness] key; the volume and brightness icons will display on the LCD screen.
2. Press the [left]/[right] keys to adjust the volume.
3. Press the [up]/[down] keys to adjust the brightness.
4. Press the [return] key to exit.

Note: The volume and brightness have 6 levels. The default level setting is level 4.

7.5 Remote Pan/Tilt (Direction Arrow)

You can remotely pan-tilt the camera. Press any of the direction arrow keys ([left], [right], [up], [down]); the direction icons will display on the LCD screen. Press the [left]/[right] keys to pan the camera. Press the [up]/[down] keys to tilt the camera. Press the [return] key to exit.

8. Menu Operation

8.1 Lullaby Setting

You can soothe the baby to sleep by playing a gentle lullaby from the baby unit.

1. Press the [menu] key; the menu will pop up.
2. Press the [left]/[right]/[up]/[down] keys until the [lullaby] icon is selected by an orange box.
3. Press the [left]/[right]/[up]/[down] keys to select one of 8 available lullabies or loop playback.
4. Press the [confirm] key to confirm.
5. Select the [stop] icon to stop.
6. Press the [return] key to exit.

Note: The lullaby default setting is OFF.

8.2 Camera

8.2.1 Add Camera

1. Press the [menu] key; the menu will pop up.
2. Press the [left]/[right]/[up]/[down] keys until the [camera] icon is selected by an orange box.
3. Press the [left]/[right]/[up]/[down] keys until the [add-camera] icon is selected by an orange box.
4. When the Pair sign is displayed with a 30-second countdown on the LCD screen, press the [pair-key] on the back of the camera.
5. Once paired, the [success] icon shows on the LCD screen.
6. If pairing fails, repeat the above steps.

8.2.2 Delete Camera

1. Press the [menu] key; the menu will pop up.
2. Press the [left]/[right]/[up]/[down] keys until the [camera] icon is selected by an orange box.
3. Press the [left]/[right]/[up]/[down] keys until the [delete-camera] icon is selected by an orange box.
4. Press the [select] key; the [yes] and [no] icons will appear.
5. Select [yes] and press the [confirm] key to delete the camera.

Split-Screen Function

The baby monitor has a Split-Screen feature. When 2 cameras are paired, the two different images will be displayed on the monitor’s screen side by side simultaneously. When 3 or 4 cameras are paired, all images will be displayed splitly on the screen in real-time.

8.3 Energy Saving (ECO)

This mode controls the sound activation of your baby unit. If there is no sound around the baby unit within 30 seconds, it stops audio transmission and turns off the parent unit's screen. When the baby unit detects sounds louder than the sensitivity level, it resumes transmission and turns on the parent unit's screen. To change the ECO level:

1. Press the [menu] key; the menu will pop up.
2. Press the [left]/[right]/[up]/[down] keys until the [eco] icon is selected by an orange box.
3. Press the [left]/[right] keys to select the desired level.
4. Press the [confirm] key to confirm.
5. Press the [exit] key to exit.

Note: [eco-low] is Low sensitivity level (baby must make a lot of sound); [eco-medium] is Middle sensitivity level; [eco-high] is High sensitivity level (baby doesn't have to make much sound).

8.4 Feeding Time Setting

1. Press the [menu] key; the menu will pop up.
2. Press the [left]/[right]/[up]/[down] keys until the [feeding-time] icon is selected by an orange box.
3. Press the [left]/[right]/[up]/[down] keys to select the desired feeding alarm time.
4. Press the [confirm] key to confirm. The [feeding-time] icon shows on the LCD screen.

Note 1: The minimum setting is 0.5 hours, and the maximum is 7 hours (9 levels). Note 2: The Feeding alarm default setting is OFF. Note 3: Select the [cancel-feeding] icon and press [confirm] to cancel the feeding alarm setting.

8.5 Temperature Setting

1. Press the [menu] key; the menu will pop up.
2. Press the [left]/[right]/[up]/[down] keys until the [thermometer] icon is selected by an orange box.
3. Press the [up]/[down] keys to select Degrees Centigrade (℃) or Degrees Fahrenheit (°F).
4. Press the [up]/[down] keys to select [temp-alarm-on] or [temp-alarm-off] for turning on/off the alarm function.
5. Press the [left]/[right] keys to adjust the Hi limit when [temp-hi] (red) is selected.
6. Press the [left]/[right] keys to adjust the Lo limit when [temp-lo] (blue) is selected.
7. The corresponding temperature shows on the LCD screen.
8. Press the [exit] key to exit.

Note: The detected temperature range is 0~40 ℃. The high temperature alarm default is 36 ℃, and the low temperature alarm default is 8 ℃. When the temperature goes above or below the settings, the [temperature] icon will display on the screen and alert the user with beeps. Press any key on the parent unit to stop beeping and flashing.

8.6 Language Setting

1. Press the [menu] key; the menu will pop up.
2. Press the [left]/[right]/[up]/[down] keys until the [language] icon is selected by a red box.
3. Press the [select-language] key to enter the sub-menu, then press [left]/[right]/[up]/[down] keys to select the desired language.
4. Press the [confirm] key to confirm.
5. Press the [exit] key to exit.

8.7 Night Light Setting

1. Press the [menu] key; the menu will pop up.
2. Press the [left]/[right]/[up]/[down] keys until the [night-light] icon is selected by a red box.
3. Press the [on]/[off] key for the night light.
4. Press the [exit] key to exit.

Note: Pressing the physical [night-light-switch] on the side of the Baby Unit can also turn the night light on or off.

8.8 Settings

8.8.1 Default Settings

1. Press the [menu] key; the Main Menu will pop up.
2. Press the [left]/[right]/[up]/[down] keys until the [settings] icon is selected.
3. Press the [menu] key; the sub-menu Settings will pop up.
4. Press [left]/[right]/[up]/[down] to select default settings, then press the [confirm] key to enter.
5. Select the [yes] icon to restore default settings; select the [no] icon to cancel default settings.
6. Press the [return] key once to exit the sub-menu, and twice to exit the main menu.

8.8.2 Alarm Volume Setting

1. Press the [menu] key; the Main Menu will pop up.
2. Press the [left]/[right]/[up]/[down] keys until the [settings] icon is selected.
3. Press the [menu] key; the sub-menu Settings will pop up.
4. Press [left]/[right]/[up]/[down] to select ALARM.
5. Select the [volume-up] icon, press the [confirm] key to increase the alarm volume.
6. Select the [volume-down] icon, press the [confirm] key to decrease the alarm volume.
7. Press the [return] key once to exit the sub-menu, and twice to exit the main menu.

8.8.3 Contact

1. Press the [menu] key; the Main Menu will pop up.
2. Press the [left]/[right]/[up]/[down] keys until the [settings] icon is selected.
3. Press the [menu] key; the sub-menu Settings will pop up.
4. Press [left]/[right]/[up]/[down] to select Contact.
5. Press the [confirm] key. You can see the HelloBaby brand, email address, and website.
6. Press the [return] key once to exit the sub-menu, and twice to exit the main menu.

8.8.4 Date/Time Setting

1. Press the [menu] key; the Main Menu will pop up.
2. Press the [left]/[right]/[up]/[down] keys until the [settings] icon is selected.
3. Press the [menu] key; the sub-menu Settings will pop up.
4. Press [left]/[right]/[up]/[down] keys until the [time] icon is selected.
5. Press the [left]/[right] keys to select Month, Day, and Year settings; press [up]/[down] keys to set your desired month, date, and year.
6. Press the [left]/[right] keys to select the timing method (12H or 24H).
7. Press the [left]/[right] keys to select Hour, Minute settings; press [up]/[down] keys to set your desired hour and minute.
8. Press the [return] key once to exit the sub-menu, and twice to exit the main menu.

8.8.5 Display Reverse

1. Press the [menu] key; the Main Menu will pop up.
2. Press the [left]/[right]/[up]/[down] keys until the [settings] icon is selected.
3. Press the [menu] key; the sub-menu Settings will pop up.
4. Press [left]/[right]/[up]/[down] keys to select Display Reverse.
5. Press the [confirm] key to open or close Display Reverse.

9. Technical Data

10. Troubleshooting

No Reception on Monitor

• The power adapters may not be properly connected.
• Confirm that the camera and monitor are ON.
• Camera may be far away from the monitor.
• Camera and monitor may not be properly paired; follow PAIRING instructions.

Interference or Poor Reception

• Move the monitor closer to the camera.
• The camera or monitor may be placed too close to many metal objects.
• Other electronic devices may be interfering with the signal.
• The battery power may be too low.
• The camera and monitor may be placed too close.
• The volume on the monitor may be set too high.

Audio Feedback (high pitched noise)

• The camera and monitor may be placed too close.
• The volume on the monitor may be set too high.

Frozen Picture on Screen

• Repower the baby unit (unplug the adapter, then plug it into the socket again).
• Press the [reset] key at the back of the parent unit.

11. Maintenance

Clean your baby monitor with a slightly damp or anti-static cloth. Never use cleaning agents or solvents.

12. Disposal Guide for Battery and Product

Do not attempt to repair or adjust any of the electrical or mechanical functions of the unit. Dispose of the product in an environmentally responsible way. For proper collection and processing, take products to designated local authority collection points or contact the store where purchased.

Improper or incorrect use of batteries may cause corrosion or leakage, leading to personal injury or property damage. Use only the types of batteries indicated in this manual.

CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45°C or Incinerate. Follow Manufacturer's Instructions.

• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
• Leaving a battery in an extremely high temperature environment can result in an explosion or leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in an explosion or leakage of flammable liquid or gas.
• The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.

13. Compliance and Warnings

FCC & ISDE Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la partie 15 des règles de la FCC et aux normes RSS exemptées de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d’interférences nuisibles, et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant entraîner un fonctionnement indésirable.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.

This device meets the exemption from routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure. Users can obtain Canadian information on RF exposure and compliance. Cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la conformité.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies pour un environnement non contrôlé.

Radiation Exposure Statement for Camera

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.

SAR Statement for Monitor

Specific Absorption Rate (SAR) information: This Monitor meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of Canada (ISED & FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the Monitor kept 0mm from the body. To maintain compliance with ISED RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the Monitor. Accessories should not contain metallic components. Use of non-compliant accessories should be avoided.

Informations sur le débit d'absorption spécifique (DAS): Cette Moniteur répond aux exigences du gouvernement en matière d'exposition aux ondes radio. Les lignes directrices sont basées sur des normes élaborées par des organisations scientifiques indépendantes. Les normes comprennent une marge de sécurité substantielle conçue pour assurer la sécurité de toutes les personnes, quel que soit leur âge ou leur état de santé. Information et déclaration d'ISDE sur l'exposition aux RF: la limite DAS du Canada (ISDE) est de 1,6 W / kg en moyenne sur un gramme de tissu. Types d'appareils: la Moniteur a également été testée par rapport à cette limite SAR. Cet appareil a été testé pour des opérations typiques portées sur le corps avec le dos de la Moniteur gardé à 0 mm du corps. Pour maintenir la conformité avec les exigences d'exposition RF d'ISDE, utilisez des accessoires qui maintiennent une distance de séparation de 0 mm entre le corps de l'utilisateur et l'arrière de la Moniteur. L'utilisation de clips de ceinture, d'étuis et d'accessoires similaires ne doit pas contenir de composants métalliques dans son assemblage. L'utilisation d'accessoires qui ne satisfont pas à ces exigences peut ne pas être conforme aux exigences d'exposition aux RF d'ISDE et doit être évitée.

EU Declaration of Conformity (DOC)

Hereby, videotimes declares that the radio equipment type is in compliance with RED Directive 2014/53/EU. The full text of the EU declaration of conformity is available on the website: www.hellobaby.net.cn

Model: HB6081

Responsible Party (US): Startline LLC, 22 Hazelwood Drive, Jericho, NY 11753, Tel: 1-516-681-3729

Authorized UK Representative (UK): APEX CE SPECIALISTS LIMITED, 89 Princess Street, M14HT, UK, info@apex-ce.com

Manufacturer: Shenzhen Videotimes Technology Co.,Ltd, Room 2106, Building 11, Tianan Yungu Phase II, Gangtou Community, Bantian Street, Longgang District, Shenzhen, Guangdong, China

WARNING IR emitted from this product.

Do not stare at operating lamp. Risk Group 1.

WARNING Strangulation Hazard

Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9 m) away). Do not remove this tag. DANGER D’ÉTRANGLEMENT: Des enfants se sont ÉTRANGLÉS avec des cordons électriques. Garde le cordon électrique hors de la portée des enfants (à plus de 0.9m/3 pi du lit d’enfant). Ne pas enlever cette étiquette.

Product tested against EN62471.

Made in China.