DS18 PRO-CFX 2-Way Passive Crossover

Owner's Manual / Manual del Usuario

General Specifications

Specification	Details
Passive Crossover Ways / Vias de Crossover Pasivo	2-Ways (High and Low Frequency) / 2-Vías (Alta y Baja Frecuencia)
Frequency Crossover Point / Punto de Cruce de Frecuencia	3.5KHz (@ 4 OHMS)
Power Handling / Manejo de Potencia	Up to 300 Watts / Hasta 300 Watts
Cut-Off Slope / Pendiente de Corte	12 dB/oct
Tweeter Attenuation / Atenuación del Tweeter	(-3 dB/-6 dB)
Top Cover Material / Material de la Cubierta Superior	Steel / Acero
Bottom Cover Material / Material de la Cubierta Inferior	Clear Acrylic / Acrílico Transparente

Crossover Features

Feature	Details
Capacitor Type / Tipo de Capacitador	NP Mylar
Coil Type / Tipo de Embobinado	KSV
Terminal Type / Tipo de Terminal	Screw-On / Atornillable
Housing Material / Material de la Carcasa	Metalic housing + plastic side covers + Clear Acrylic / Carcasa metálica + Cubiertas Laterales de Plástico + Acrílico Transparente
Adjustments / Ajustes	Tweeter Attenuation / Atenuación del Tweeter

Measurements

Measurement	Value
Overall Length / Largo Total	6.3" / 160 mm
Overall Depth / Profundidad Total	3.5" / 88 mm
Overall Height / Altura Total	1.5" / 38 mm

Wiring Diagram and Connectors

The diagram illustrates the connection of the DS18 PRO-CFX 2-Way Passive Crossover. It shows the crossover unit receiving input signals via RCA cables from a source (implied, not shown). The crossover then connects to an amplifier (specifically mentioning a DS18 GEN-X800.2 Class A/B 2 Channel Amplifier). Power for the crossover is supplied via a +12V (Battery) connection with a fuse, and a REM (Turn-On Lead) signal from the amplifier. The crossover outputs are connected to a tweeter and a woofer.

Connectors

TW-: Tweeter (Negative) / Tweeter (negativo)
0dB: Tweeter (Positive) / Tweeter (positivo)
-3dB: Tweeter Attenuation -3dB (Positive) / Atenuación del Tweeter -3dB (positivo)
-6dB: Tweeter Attenuation -6dB (Positive) / Atenuación del Tweeter -6dB (positivo)
W +: Woofer (Positive) Connect to Speaker / Woofer (positivo) Conectar al Altavoz
W-: Woofer (Negative) Connect to Speaker / Woofer (negativo) Conectar al Altavoz
IN +: Input (Positive) Connect to Amp. / Entrada (Positiva) Conectar al Amp.
IN-: Input (Negative) Connect to Amp. / Entrada (Negativa) Conectar al Amp.

More Information

For more information, please visit DS18.COM.

Tagline: WE LIKE IT LOUD

	DS18 XM5 5-Way Active Crossover: Owner's Manual, Features, and Installation Comprehensive owner's manual for the DS18 XM5 High-Volt 5-Way Active Crossover. Includes installation guide, detailed features, technical specifications, warranty information, and connection diagram description.
	DS18 XM3 3-Way Active Crossover Owner's Manual Owner's manual for the DS18 XM3 3-Way Active Crossover, detailing its features, specifications, functions, mounting, installation, and troubleshooting.
	DS18 JK-SBAR Jeep Sound Bar Installation and Specifications Detailed specifications and mounting information for the DS18 JK-SBAR Jeep Sound Bar, designed for JK and JKU models. Includes speaker fitment and dimensions.
	DS18 PRO-TW220B 3.2" Super Bullet Tweeter Owner's Manual Discover the DS18 PRO-TW220B 3.2-inch Super Bullet Tweeter. This owner's manual provides detailed specifications, including power handling, impedance, frequency response, materials, and precise measurements for this high-performance car audio component. Learn about warranty and safety information.
	DS18 PRO-HP202 ABS Long Horn Owner's Manual Owner's manual for the DS18 PRO-HP202 ABS Long Horn, a compression driver horn with a 2-inch throat. Includes specifications, measurements, and warranty information.
	DS18 PRO-HP102 ABS Horn Owner's Manual Owner's manual for the DS18 PRO-HP102 ABS Horn for Compression Driver with a 2" throat. Includes specifications, measurements, and warranty information.
	DS18 PRO-HP52 ABS Short Horn Owner's Manual: Specifications, Measurements, and Details Detailed owner's manual for the DS18 PRO-HP52 ABS Short Horn, featuring technical specifications, precise measurements, available color options, warranty information, and important safety warnings. This horn is designed for 2-inch throat compression drivers.
	DS18 PRO-DKH1X 2" Throat Aluminum Horn Driver - Owner's Manual & Specifications Detailed owner's manual and specifications for the DS18 PRO-DKH1X 2-inch throat aluminum horn driver with titanium voice coil. Includes dimensions, power handling, frequency response, and more.