Lumintop GT Nano V3.0 User Manual
Specifications
| Parameter | Value |
|---|---|
| ANSI/NEMA FL1 | |
| Output (Lumens) | 1 (Moonlight), 31 (Low), 180 (Med), 400 (High), 700 (Turbo) |
| Runtime | 48h (Moonlight), 4h 50min (Low), 1 min (Med), 1 min +45min (High), 1 min +42min (Turbo) |
| Distance | 400m (Max) |
| Intensity | 40000cd (Max) |
| Impact Resistant | 1m |
| Waterproof | IPX8, underwater 2m |
| Light Source | Osram NM1 LED |
| Battery | 1 X 10280 Li-ion |
| Power | 9W (Max) |
| Size | 67*24*14mm |
| Net Weight | 27g (battery included) |
Key Components
Heat sink: Made of aircraft-grade aluminum with type-III HA finished surface.
Side switch: Located on the body for operation.
Body: The main housing of the flashlight.
Battery level indicator: A light indicating battery status.
Flat tail cap: Enables the flashlight to stand upright.
USB-C Port: For charging the internal battery.
Lanyard hole: For attaching a lanyard.
Operation Instructions
Modes
General Modes: Low, Medium, High (with mode memory).
Hidden Modes: Moonlight, Turbo, Blinking Modes.
Basic Operations
- ON/OFF: Single click the switch.
- Output Change: While the flashlight is ON, press and hold the switch to cycle through output levels (Low, Medium, High). Release to select the desired level.
- Moonlight Mode: Press and hold the switch from OFF.
- Turbo Mode: Quickly double-click the switch.
- Blinking Modes: Triple-click the switch to enter Strobe mode. Another triple-click cycles through SOS, Beacon, and Strobe.
- Lock-out/Unlock: Quadruple-click the switch from OFF to enter lock-out mode. In lock-out mode, a momentary ON is available by pressing the switch. Quadruple-click again to unlock. Alternatively, loosen the threads to disconnect power.
- Switch Backlight ON/OFF: Click the switch seven times from OFF to toggle the backlight.
Intelligent Mode Memory Function
The flashlight will remember and recall the last used general output level when turned on again, excluding the blinking modes.
USB-C Charging
Rechargeable via a built-in USB-C charging port.
Features built-in overcharge protection to prevent overcharging.
Indicator Light: Green when voltage is sufficient, red when the battery is low. Red light is on during charging and turns green once fully charged.
After charging is complete, ensure the rubber cover is replaced to maintain waterproof capability.
Multiple Protection Functions
- Overcharge Protection: Prevents damage to the battery from overcharging.
- Over-Discharge Protection: Prevents damage to the battery from over-discharge.
- Reverse Polarity Protection: Prevents damage to the flashlight from incorrect battery installation or short circuit.
- Overheat Protection: When the flashlight's temperature is high, it will automatically reduce output to prevent overheating and ensure comfortable use.
- Low Voltage Protection: When voltage drops, the flashlight will reduce output and eventually shut down automatically.
Safety & Warnings
- Battery Warning: Contains a battery. Do not disassemble, heat above 100 °C, or incinerate.
- Choking Hazard: Contains small parts. Not suitable for children under 3 years old.
- Eye Safety: This device is a high-intensity flashlight. To avoid potential injury, do not shine it directly into the eyes.
- General Safety: Do not point the light directly at people, animals, moving vehicles, or flammable materials.
- Storage (Extended Period): If the flashlight will not be used for an extended period, loosen the threads to disconnect the power or remove the battery to prevent damage from battery leakage.
- Battery Maintenance: Properly maintain the battery and charge it every three months to preserve its performance.
- Carrying/Storage: When carrying or storing the flashlight in a backpack or similar, set it to lock-out mode or loosen the threads to disconnect the power to prevent accidental activation and potential inconvenience.
Warranty
- 30 Days from Purchase: Free repair or replacement for manufacturing defects.
- 5 Years from Purchase: Lumintop will repair products free of charge within 5 years of purchase (2 years for products with a built-in battery, 1 year for the battery) if issues occur under normal use.
- Lifetime Warranty: After the warranty period, repairs are available for a fee covering parts as needed.
- This warranty does not cover normal wear and tear, improper maintenance, abuse, force majeure, or damage caused by human factors.
Manufacturer Information
Made in China
Manufacturer: LUMINTOP TECHNOLOGY CO., LTD
Address: 11th Floor, Block B, Tianhengda Industrial Park, No.2 Chengxin Road, Longgang District, Shenzhen, China
Web: www.lumintop.com
Tel: +86-755-88838666
E-mail: service@lumintop.com
EU Representative: EUBRIDGE ADVISORY GMBH, Virginia Str. 2, 35510 Butzbach, Germany. Tel: +49-68196989045. Email: eubridge@outlook.com
UK Representative: WSJ Product LTD, Unit 1 Alsop Arcade, Liverpool, United Kingdom. Email: info02@wsj-product.com. Tel: +004407825478124
Certifications: CE, FC, RoHS, UKCA, UIS, ANSI.
