Ruijie RG-EG210G-E Quick Installation Guide
Before You Begin
Package Contents
| Item | Name | Quantity | Unit | Remark |
|---|---|---|---|---|
| 1 | RG-EG210G-E host | 1 | Set | |
| 2 | Mounting bracket | 2 | Piece | |
| 3 | Foot pad | 4 | Piece | |
| 4 | M4x8 countersunk flat head screws (common head style) with cross recess | 6 | Piece | |
| 5 | Power cord | 1 | Piece | |
| 6 | Power cord retention clip | 1 | Piece | |
| 7 | Quick Start Guide | 1 | Copy | |
| 8 | Warranty card | 1 | Copy |
You can retrieve product supporting documents by visiting the Ruijie Networks official website at https://www.ruijienetworks.com. Navigate to Support > Technical Documents to download the necessary files.
Installation and Networking
The RG-EG210G-E router complies with EIA standards and can be installed in a 19-inch rack.
Installation Steps:
- Take out two L-shaped mounting brackets and six M4x8 FMO countersunk head screws.
- Attach the mounting brackets to both sides of the router and secure them with three M4x8 FMO countersunk head screws per side.
- Connect the device with cables properly.
- WAN ports: Connect to the Internet.
- LAN ports: Connect to switches, Access Points (APs), or other devices.
Diagram Description: An illustration shows L-shaped mounting brackets being attached to the left and right sides of the router chassis using screws.
Diagram Description: The router's rear panel is shown, displaying numbered ports labeled LAN 0, LAN 1, LAN 2, LAN 3, LAN 4, LAN 5, LAN 6/WAN 3, LAN 7/WAN 2, LAN 8/WAN 1, and WANO. Status and Reset buttons are also visible.
Networking Configuration
Method 1: App-based Configuration (Recommended)
Scan the QR code on the manual or device to download the Ruijie Cloud App. Follow the in-app guide to set up and configure the network.
Diagram Description: An image depicts a hand holding a smartphone displaying a QR code, used for downloading the Ruijie Cloud App.
Method 2: Web-based Configuration
Connect the cable to the device port and visit http://192.168.110.1 using a web browser to perform the configuration.
Port Information
Diagram Description: The router's front panel is shown, with numbered indicators (1-5) pointing to different ports and buttons.
Notes:
- 1. System status LED
- 2. Reset button
- 3. LAN ports
- 4. LAN/WAN ports
- 5. WAN port
Specifications
| Specification | RG-EG210G-E |
|---|---|
| Port | 10*10/100/1000M Base-T ports, up to 4 WAN ports (default: 1 WAN port, 9 LAN ports; ports LAN6/7/8 can be switched to WAN ports) |
| Dimensions (W x D x H) | 440mm x 201.5mm x 43.6mm |
| Operating Environment | Temperature: 0°C - 40°C |
| Humidity: 10% - 90% RH, non-condensing | |
| Storage Environment | Temperature: -40°C - 70°C |
| Humidity: 5% - 95% RH, non-condensing |
CE Warning
Operation of this equipment in a residential environment may cause radio interference.