D32 Instruction
This manual provides instructions for the D32 Smart Mini Label Maker.
01. Packing List
- Printer*1
- Product instruction*1
- Charging line*1
? NOTE: The number of paper rolls in the list is subject to the actual shipment.
02. Product Specifications
| Product name | Smart Mini Label Maker |
| Product model | D32 |
| Printing technology | Thermal printing |
| Consumable width | 12-15mm |
| Effective printing width | 12 mm |
| Supported consumables | Pre-cut paper, black mark paper, continuous paper |
| Printing density | Light, standard, dark |
| Printing resolution | 203 dpi |
| Print head service life | 50 KM |
| Communication interface | Bluetooth |
| Product size | 82*82*32.5 mm (3.23*3.23*1.28 inch) |
| Power input | 5V=2A |
| Power supply method | Lithium Battery |
| Supported operating system | Android/iOS |
03. Parts Description
Label Maker Display
Key components include:
- Print head
- Charging port
- Paper compartment cover
- Paper exit
- Paper cabin
- Power button
- Indicator light
Label Paper Display
Various labels are available for purchase, including pre-cut paper and continuous paper.
Power Button and Indicator Light Instructions
Button Instructions
| Button Type | Operation | Function |
|---|---|---|
| Power Button | Long press for 3s | Power on/off |
| Power Button | Press once when printer is on | Calibrate label position |
| Power Button | Double press when printer is on | Print a self-test page |
Indicator Light Instructions
| Status | Meaning | Advised Action |
|---|---|---|
| Solid Green Light | Device functioning properly/and fully charged | |
| Fast Flashing Green Light | Charging when printer is off | |
| Slow Flashing Green Light | Charging when printer is on | |
| Solid Red Light | Out of paper / Printer overheat | Properly insert label paper into Paper Outlet / Pause printing for 5 min for printer to cool down |
| Slow Flashing Red Light | Low battery | Charge for 1 hour (or at least 20 min if in urgent need) |
| Fast Flashing Red Light | Battery running low | Charge for 2-3 hours |
? NOTE: When installing or replacing the label roll for the first time, label position identification is required (Step 01). Failure to perform this step may result in printing issues like missing first labels or misalignment.
04. Guidelines for Use
- Open the paper compartment cover of the machine. [Open Cover]
- Take out the label paper, tear off the anti-loosening sticker. [Remove and Prepare Label Paper]
- Depending on the direction of the marking, place the label paper into the paper compartment. [Insert Label Paper]
- Pull out the label paper from the Paper exit by 5 mm for normal printing. [Pull Paper 5mm]
05. Boot Guide
- After turning on the power, click the power button to identify the label position. [Calibrate Label Position]
- The printer will output a piece of paper, indicating positioning is completed. [Positioning Complete]
? NOTE: Ensure label position identification is performed correctly.
06. Downloading the App
Method 1: Search for the "Print Master" app on the App Store® or Google Play™ for download and installation.
Method 2: Scan the QR code to download the app. (Note: Safari browser on Apple devices may require a built-in QR code scanner.)
App Store Link: App Store
Google Play Link: Google Play
07. Printer Connection
- Turn on GPS. (Required for Android mobile phones only.) [Turn on GPS]
- Open the "Print Master" App. [Open App]
- Click to search for the device. Ensure your label maker and mobile phone's Bluetooth are turned on. [Search Device]
- Connect immediately. [Connect Immediately]
? NOTE: The printer must be connected within the App after Bluetooth is enabled. Android devices require GPS permission for Bluetooth functionality. Ensure both the printer and mobile Bluetooth are active during connection.
08. Confirm the Label Size
Method I: Check the label paper packaging for size details (e.g., "12mm*40mm").
Method II: Check the label paper pads. Note that old and new versions of label paper may differ.
Example: Product: Pattern label, Model: DP-P06, Detail: Polar bear, Seal, Snow fox, Spec: 12*40mm/210 pcs, Quantity: 3
09. Detailed Online Guide
Method 1: Visit downloadapp.qu-in.top/Ph for detailed guides, video tutorials, and FAQs.
Method 2: Scan the QR code to access the same resources. (Note: Safari browser on Apple devices may require a built-in QR code scanner.)
10. FCC WARNING
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If interference occurs, try correcting it by reorienting or relocating the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.
FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
11. ISED NOTICE (Canada)
IC Warning: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
IC RF Exposure Statement: The device has been evaluated to meet general IC RF exposure requirements and can be used in portable exposure conditions without restriction.
Maintenance Card / 保証書 / Garantiekarte
Fields for user information, product information, and reason for return/replacement/maintenance.
- Name
- User Information (Gender, Phone, Address)
- Product Information (Date of purchase, Product order number, Product serial number)
- Reason for Return (Replace, Repair, Request Maintenance) / Fault description
