Vecelo SLT-NO.1 Chair - Assembly Guide and Product Information
Model: KHD-SD06-BLK | Lot No.: SLT-NO.1
Item Description: Chair
Dimensions: 42cm (Width) x 40cm (Depth) x 90cm (Height)
? Important Information & Tips
Tips:
- Check all components and screws before assembly.
- If any part is missing, do not install. Contact support@vecelo.com to receive the missing part. Support will respond within 24 hours.
↩️ Return Policy
Vecelo offers a return policy for your new item. Please contact customer service directly before initiating a return. For assistance with concerns or questions about your item, email support@vecelo.com.
Items must be returned within 30 days of delivery for a full refund. Returns must be in good condition, in the original box, and include all original proof of purchase, parts, and accessories.
⚠️ Troubleshooting
Missing Parts:
If you are missing parts, send an email with your question to support@vecelo.com. A replacement will be sent within 24 hours. Once resolved, the issue is considered "Issue resolved" ✅.
Other Issues:
For other issues, send an email with your question to support@vecelo.com. Expect a response within 24 hours. Once resolved, the issue is considered "Issue resolved" ✅.
Vecelo controls manufacturing and distribution to ensure quality.
Product Components
| Item | Description | Quantity |
|---|---|---|
| 1 | Seat | 1*2 (for 2 chairs) |
| 2 | Lower Support Bar | 1*2 (for 2 chairs) |
| 3 | Cross Support Bar | 1*2 (for 2 chairs) |
| 4 | Backrest Frame | 1*2 (for 2 chairs) |
| 5 | Leg Frame | 2*2 (for 2 chairs) |
Screws & Tools
| Identifier | Description | Quantity |
|---|---|---|
| A | Screw (M6x40mm) | 4*2 (for 2 chairs) |
| B | Screw (M6x30mm) | 8*2 (for 2 chairs) |
| C | Screw (M6x20mm) | 2*2 (for 2 chairs) |
| D | Washer | 2*2 (for 2 chairs) |
| E | Allen Wrench | 1*2 (for 2 chairs) |
Assembly Instructions
Note: The following instructions are for assembling two chairs. Quantities marked with '*2' refer to the total needed for two chairs.
Step 1: Attach Backrest Frame to Leg Frames
Take two Leg Frames (5). Attach the Backrest Frame (4) to the top of the Leg Frames using two Screws (B) and two Washers (D) per side. Use the Allen Wrench (E). Total 4 Screws (B) and 4 Washers (D) used in this step for two chairs.
Diagram Description: Shows two leg frames (5) standing upright, with a backrest frame (4) being attached to the top of each leg frame using screws (B) and washers (D).
Step 2: Attach Lower Support Bar
Take two Leg Frames (5) with the attached backrest. Attach the Lower Support Bar (component 2) to the lower section of the Leg Frames using two Screws (C) per side. Total 4 Screws (C) used for two chairs.
Diagram Description: Shows the partially assembled leg frames from Step 1. The lower support bar (2) is being attached to the lower part of the leg frames using screws (C).
Step 3: Attach Cross Support Bar
Take the assembled leg frames. Attach the Cross Support Bar (3) between the two Leg Frames (5) using two Screws (B) on each side. Total 4 Screws (B) used for two chairs.
Diagram Description: Shows the leg frames connected by the cross support bar (3), secured with screws (B).
Step 4: Attach Seat Support
Take the assembled leg structure. Attach the Seat Support (2) between the front legs using two Screws (B) on each side. Total 4 Screws (B) used for two chairs.
Diagram Description: Shows the seat support bar (2) being attached to the front legs of the chair structure using screws (B).
Step 5: Attach Seat
Place the Seat (1) onto the assembled frame. Secure the Seat using four Screws (A) from underneath. Total 8 Screws (A) used for two chairs.
Diagram Description: Shows the seat (1) being placed on top of the assembled chair frame and secured from below with screws (A).
Step 6: Final Assembly
The two chairs are now fully assembled.
Diagram Description: Shows two completed chairs.
? Contact Information
For any inquiries, please contact Vecelo:
- Email: support@vecelo.com ✉️
- Website: www.vecelo.com
