Danfoss React™ RA click Thermostatic Sensors Series

Installation

Installation | Montage | Installation | Instalación

Step 1: Attach the thermostatic sensor to the radiator valve. Diagram shows the sensor being screwed onto the radiator valve body.

Diagram: Sensor being attached to a radiator valve.

Step 2: Connect the sensor to the valve. Diagram shows a close-up of the sensor clicking onto the valve connection point.

Diagram: Close-up of sensor connection to valve.

Step 3: Ensure the sensor is securely attached. A 'click' sound indicates proper engagement. Diagram shows the sensor fully attached to the valve.

Diagram: Sensor fully attached, with 'click' indicator.

BIV Installation

BIV Installation | Montage | Installation | Instalación

Step 1: Attach the sensor to the valve. Diagram shows the sensor being attached to a radiator valve.

Diagram: Sensor being attached to a radiator valve.

Step 2: Connect the sensor to the valve. Diagram shows a close-up of the sensor clicking onto the valve.

Diagram: Close-up of sensor connection to valve.

Step 3: Ensure the sensor is securely attached. A 'click' sound indicates proper engagement. Diagram shows the sensor fully attached to the valve.

Diagram: Sensor fully attached, with 'click' indicator.

Uninstall

Uninstall | Deinstallieren | Désinstaller | Uninstall

Step 1: Remove the sensor from the valve. Diagram shows the sensor being pulled away from the valve.

Diagram: Sensor being removed from valve.

Step 2: To release the sensor, a tool (like a screwdriver) may be needed to disengage a locking mechanism. Diagram shows a screwdriver being used on a part of the sensor, with a cross symbol indicating an incorrect action or warning.

Diagram: Tool used to release sensor lock.

Temperature Limitation (MAXIMUM)

Temperature Limitation | Temperaturbegrenzung | Limite de température | Limitación de temperatura (MAXIMUM)

Step 1: Set the desired maximum temperature. Diagram shows the dial set to '2'.

Diagram: Dial set to 2.

Step 2: To set the maximum limit, turn the dial to the highest desired setting, for example, '5' (MAX).

Diagram: Dial set to MAX (5).

Step 3: Example: Setting the maximum to '4'. Diagram shows the dial set to '4'.

Diagram: Dial set to 4.

Step 4: Example: Setting the maximum to '4' (MAX = 4). Diagram shows the dial set to '4'.

Diagram: Dial set to 4 (MAX=4).

Step 5: Example: Setting the maximum to '4' (MAX = 4). Diagram shows the dial set to '4'.

Diagram: Dial set to 4 (MAX=4).

Temperature Limitation (MINIMUM)

Temperature Limitation | Temperaturbegrenzung | Limite de température | Limitación de temperatura (MINIMUM)

Step 1: Set the desired minimum temperature. Diagram shows the dial set to '2'.

Diagram: Dial set to 2.

Step 2: To set the minimum limit, turn the dial to the lowest desired setting, for example, '1' (MIN).

Diagram: Dial set to MIN (1).

Step 3: Example: Setting the minimum to '1'. Diagram shows the dial set to '1'.

Diagram: Dial set to 1.

Step 4: Example: Setting the minimum to '2' (MIN = 2). Diagram shows the dial set to '2'.

Diagram: Dial set to 2 (MIN=2).

Step 5: Example: Setting the minimum to '2' (MIN = 2). Diagram shows the dial set to '2'.

Diagram: Dial set to 2 (MIN=2).

Theft Protection

Theft protection | Diebstahlschutz | Protection contre le vol | Protección contra robo

Step 1: Diagram shows the sensor with a locking mechanism.

Diagram: Sensor with locking mechanism.

Step 2: A screwdriver is used to engage the locking mechanism.

Diagram: Screwdriver engaging lock.

Step 3: A part is inserted into the sensor to activate theft protection.

Diagram: Part insertion for theft protection.

Step 4: The theft protection is now engaged on the installed sensor.

Diagram: Theft protection engaged.

Available Parts:

• Code no. 013G5245
• Code no. 013G1236

Theft Protection (Removal)

Theft protection (Removal)| Diebstahlschutz (Entfernung) | Protection contre le vol (enlèvement) | Protección contra robo (eliminación)

Step 1: Use a screwdriver to release the theft protection mechanism.

Diagram: Screwdriver releasing theft protection.

Step 2: Remove the theft protection part from the sensor.

Diagram: Theft protection part removed.

Available Parts:

• Code no. 013G5245
• Code no. 013G1236

Blind Mark

Blind mark | Blinde markierung | Marque aveugle | Marca ciega

The sensor features a blind mark (indicated by the number '3' on the dial) for users with visual impairments. Diagram highlights the number '3' on the sensor dial, indicating a blind mark for visual impairment, along with a small indicator.

Diagram: Sensor dial showing blind mark '3'.

Contact & General Information

For more information, visit danfoss.com or contact Danfoss A/S at +45 7488 2222.

Danfoss Climate Solutions | 2023.03

Document reference: AN448339341662en-000101

Information provided by Danfoss is for guidance only and is binding only when explicitly referenced in a quotation or order confirmation. Danfoss reserves the right to alter products without prior notice. Trademarks are property of Danfoss A/S or its group companies.