B-SYSTEM INSTALLATION SOLUTIONS

Overview

This guide provides instructions for installing the B-SYSTEM gineos mounting system. The gineos system is designed for seamless integration of compatible smart speakers into your environment.

Installation Options:

• Wall Mounting (Wall/Wand)
• Ceiling Mounting (Ceiling/Decke)

For visual assistance, an Installation Video is available.

Installation Steps

1. Step 1: Prepare Ceiling Structure

   Diagram shows a section of a suspended ceiling grid with pre-installed mounting points and visible electrical cables.

2. Step 2: Mark Installation Point

   Diagram shows a flat ceiling surface with a circular outline marked. A dashed arrow indicates the area for installation.

3. Step 3: Install Ceiling Mount Hardware

   Diagram illustrates mounting brackets and screws being attached to the ceiling structure at the marked location.

4. Step 4: Prepare Wiring and Bracket

   Diagram shows electrical wiring being routed and a primary mounting bracket prepared for connection to the ceiling hardware.

5. Step 5: Attach Speaker Bracket to Mount

   Diagram shows a speaker bracket being secured to the main ceiling mount using a power drill [power drill tool].

6. Step 6: Connect Speaker and Secure

   Diagram illustrates the speaker being connected to the prepared wiring and then fastened to the mounting bracket.

7. Step 7: Final Attachment Check

   A close-up view of the speaker mounting mechanism. Text "4 x" indicates four secure attachment points. A tool, likely a screwdriver [screwdriver tool], is shown.

8. Step 8: Install Speaker Grille

   Diagram shows the completed installation of the speaker unit within the ceiling. A circular speaker grille is depicted being placed over the installed speaker.

Installation Video

A video demonstrating the installation process is available. Please scan the QR code provided in the original document or visit the B-SYSTEM website for access.