User Manual for Housen Solutions models including: 28L Toilet Paper Holder, 28L, Toilet Paper Holder, Paper Holder, Holder

创哲带钩 毛巾架纸巾架安装说明书

User Manual. 100mm x1 x2 x2 x4 x4 x4 x10. 100mm. Toilet paper holder. PRODUCT INSTALLATION STEPS. Assemble the shellf and fixed block with screw A, then tighten ...

2 days ago — User Manual. 100mm x1 x2 x2 x4 x4 x4 x10. 100mm. Toilet paper holder. PRODUCT INSTALLATION STEPS. Assemble the shellf and fixed block with screw A, then tighten ...

2 giorni fa — Assemble the shellf and fixed block with screw A, then tighten the screws with a screwdriver. Note: The fixed block with bigger hole for screws.

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 381.72KB

Document Document

PRODUCT INSTALLATION STEPS
The fixed block side with bigger hole for screws is upward
screw A

Assemble the shellf and fixed block with screw A, then tighten the screws with a screwdriver.
Note: The fixed block with bigger hole for screws should be upward when assembling (as above picture), thus the screws could be completely screwed into the holes and make sure the fiexed block be flat on the surface.

Use a screwdriver to screw out the screws on the bottom side, install the tissue holder on the side, and then screw the screws on

Place the product horizontally on the wall and mark the drilling position with a marker.

screw B

Drill holes at the marked position with a drill.

Hammer the Rubber plug completely into the drilled hole to ensure that the wall is flat.

Install the product, fix it with screw B, tighten screw B with a screwdriver, and finally install the screw decorative cover.

INSTALLATION ACCESSORIES:

x2
Shelf

100mm
x2
Fixed block

x1
Paper towel holders

x4
Screw B

x4
Screw decorative cover

x4
Rubber plug

x1
Screwdriver
x10
Screw A

User Manual
Toilet paper holder
100mm