Stinger IE268 Infotainment System
Install / Quick Setup Guide
Product Overview
The Stinger IE268 is a 6.8-inch infotainment system designed to enhance your vehicle's audio and connectivity experience. It supports wireless connectivity for Apple CarPlay and Android Auto, offering seamless integration with your smartphone.
Part Number: PN: IE268
For a detailed user guide, scan the QR code or visit: stingersolutions.com/pages/welcome-ie268
Included Parts
| QTY | Description | Part NO |
|---|---|---|
| 1 | Radio Module | IE268 |
| 1 | Radio Harness | - |
| 1 | GPS Antenna | PSEH-1109 |
| 1 | External Microphone | PSEH-1108 |
| 1 | Radio Trim | - |
| 1 | Radio Cage | - |
| 6 | Mounting Screws | - |
Radio Wiring
The following table details the wire colors, polarity, and their functions:
| Color | Polarity | Function |
|---|---|---|
| Yellow | + | Constant 12 volt power source regardless of key position. |
| Red | + | Accessory 12 volt power source requires turning of the key position. |
| Black | - | Chassis ground. |
| Orange | + | Illumination wire, provides 0 volts when lights are off and 12 volts when the vehicle exterior lights are on. |
| Lt Green | - | Parking brake, vehicle provides a ground signal when parking brake is pulled up. |
| Blue | + | Power antenna, provides 12 volts from the receiver when the FM or AM radio is being used. Turns off on any other source. |
| Blue/White | + | Amplifier turn on, provides 12 volts from the receiver when receiver is turned on. |
| Pink | + | V.S.S. – Vehicle speed sense (Recommended). |
| White/Grey | + | Camera 2 Trigger (Optional). |
| White/Green | + | Camera 3 Trigger (Optional). |
| White/Purple | + | Camera 4 Trigger (Optional). |
| White | + | Left Front Speaker. |
| White/Black | - | Left Front Speaker. |
| Grey | + | Right Front Speaker. |
| Grey/Black | - | Right Front Speaker. |
| Green | + | Left Rear Speaker. |
| Green/Black | - | Left Rear Speaker. |
| Purple | + | Right Rear Speaker. |
| Purple/Black | - | Right Rear Speaker. |
| Brown | Input | SWC 1 (Steering Wheel Control 1). |
| Brown/Black | Input | SWC 2 (Steering Wheel Control 2). |
| Orange 3.5 | Input | SWC input to Radio. |
Installation Notes
- When connecting optional steering wheel controls, please refer to SWC manufacturer's wiring instructions to connect.
- The IE268 Power harness should color match wire colors of the vehicle-specific harness being used to connect to the vehicle. This harness is sold separately.
- It is not advised to remove OEM radio plugs to wire the IE268 directly. A vehicle-specific harness is needed.
- If searching for a vehicle-specific harness, please visit www.PAC-Audio.com.
- When making wire connections, solder or use proper butt connectors are recommended.
- No exposed wire strands should be exposed after making wire connections.
- Do not plug the wire harness into the vehicle until all wire connections have been completed and all connections have been verified to have no exposed wires or wire strands.
- If wires are unused, tape and secure wire ends for safety and to avoid unwanted failures.
- If the radio does not power on when the vehicle is started after installation is complete, verify all wiring connections are correct and secure. Also, verify there are no blown fuses in the vehicle's fuse panels.
Wire Diagram
The wire diagram illustrates the connections for various functions:
- Battery 12V (+): Yellow wire
- Rear Left Speaker (-): Green/Black wire
- Rear Left Speaker (+): Green wire
- Rear Right Speaker (-): Purple/Black wire
- Rear Right Speaker (+): Purple wire
- Front Left Speaker (-): White/Black wire
- Front Left Speaker (+): White wire
- Front Right Speaker (-): Grey/Black wire
- Front Right Speaker (+): Grey wire
- Illumination (+): Orange wire
- Accessory 12V (+): Red wire
- Reverse Switch (+): Purple/White wire
- Power Antenna (+): Blue wire
- Ground (-): Black wire
- Parking Switch (-): Light Green wire
- Power Control (+): Blue/White wire
- Vehicle Speed Sensor Input: Pink wire
- Left Camera Trigger (+): White/Gray wire
- Right Camera Trigger (+): White/Green wire
- Front Camera Trigger (+): White/Purple wire
- SWC 1: Brown wire
- SWC 2: Brown/Black wire
A 3.5mm jack is available for Steering Wheel Control Input (Large Black wire).
A fuse (15A) is indicated in the diagram.
Radio Connections
The rear panel of the IE268 unit features several connection ports:
- 1. Power Connection: Main radio harness connection for power and factory wired speakers.
- 2. External Mic Connection (optional): 3.5mm connection for an external microphone.
- 3. Camera Connection: Yellow RCA terminals allowing up to 4 camera connections.
- 4. RCA Audio Outputs: RCA outputs to allow connection to aftermarket amplifiers.
- 5. SiriusXM Connection: Used when adding an optional SXM Tuner (sold separately).
- 6. USB-C Connection: Used for wired Car Play/Android Auto and phone charging. Additional cable required.
- 7. USB-A: Used for firmware updates, USB media, and phone charging. Additional cable required.
- 8. GPS Antenna Connection: Port to connect the provided GPS antenna.
- 9. AM/FM Antenna Connection: Factory radio antenna connection.
The Basics
Familiarize yourself with the basic controls and display elements:
- 1. Reset Button: To factory reset the radio.
- 2. Home Menu Button: Tap to access the Home Menu. Dimmed menu items are not selectable.
- 3. Voice Button: Launches voice control (e.g., Siri, Google Assistant).
- 4. Mute Button: Mutes all audio.
- 5. Volume Control: Increase or decrease volume.
- 6. Power Button: Long press to power the unit off or on.
- 7. Clock: Tap to adjust clock settings.
- 8. Phone Status: Displays CP/AA connection status, phone service level, and battery life.
- 9. Home Menu: Tap to launch the selected app.
The screen displays the current time, source/info, and connected device status.
Getting Started
Powering Up
With the vehicle ignition in the ON or ACC position, the radio will automatically power on. The source will default to the last source used prior to powering down your IE268. You can adjust the audio volume at start-up in Audio Settings (refer to page 43 for details).
The Information Bar, located at the top of the screen, provides content-sensitive controls depending on the current SOURCE. It also displays time, phone info, and Android Auto or CarPlay connection status.
Selecting a Source
To select a SOURCE, press the HOME button. Sources that are not currently available will be grayed out.
Display Off
Press Home Button > Swipe left > Display Off to turn off your IE268. This is useful at night to prevent eye fatigue. Tap anywhere on the screen to turn the display back on.
Get Connected
Connect your smartphone via Bluetooth or phone projection:
- Swipe left on the homescreen and tap Device List.
- Make sure your device is in pairing mode and tap +Add a Device.
- Select your device from the list. If your device does not appear, confirm it is discoverable and tap Available Devices to rescan.
- Confirm the PIN Code displayed on the head unit screen and your device.
- Select the connection type you want to use with your device (Bluetooth / phone projection).
If you choose phone projection, your phone projection application (e.g., Apple CarPlay or Android Auto) will launch automatically.
Available connection types:
- Bluetooth ?
- Android Auto ▶️
- Apple CarPlay ?
System Firmware Update
Checking and updating the System Firmware is an important step for proper operation. This should be done first before setting any system and vehicle settings, as those settings may be lost after an update.
Make sure a thumb drive containing your firmware update is inserted into an available USB port and tap System Firmware Update.
You can find firmware updates on the IE268 Product Page at stingersolutions.com.
Legal and Brand Information
Trademarks:
- Apple CarPlay is a trademark of Apple Inc. Use of the Apple CarPlay logo means that a vehicle user interface meets Apple performance standards. Apple is not responsible for the operation of this vehicle or its compliance with safety and regulatory standards. Note that the use of this product with iPhone, iPod, or iPad may affect wireless performance.
- SiriusXM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved.
- Android, Android Auto, Google Play and other marks are trademarks of Google LLC.
- The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, INC. and any use of such marks by Stinger is under license.
- Stinger and the Stinger logo are trademarks or registered trademarks of Stinger in the United States and other countries.
- IE268 and the IE268 logo are trademarks or registered trademarks of Stinger in the United States and other countries.
Visit stingersolutions.com for updates and further information.
Contact Information
Technical Support:
800-477-2267
support@aampglobal.com
Customer Solutions:
800-477-2267
customersolutions@aampglobal.com
Stinger is a Power Brand of AAMP Global
15500 Lightwave Drive, Suite 202
Clearwater, Florida 33760
User Agreement
End user agrees to use this product in compliance with the instructions and terms of use and with all State and Federal laws. STINGER provides instructions and safety warnings with respect to this product and disclaims all liability for any use not in conjunction with those instructions or other misuse of its product. If you do not agree, please discontinue use and contact STINGER. This product is intended for off-road use and passenger use only.
Original Document
If the viewer doesn’t load, open the PDF directly.