Installation Instructions
What you get:
A*2: Two main side frames.
B*2: Two sets of step supports.
C*4: Four connecting pieces.
D*8: Eight step treads.
E*2: Two handle grips.
F*10: Ten screws (type F).
G*1: One handle support.
H*2: Two vertical handle supports.
I*4: Four long bolts.
J*29: Twenty-nine screws (type J).
K*43: Forty-three nuts (type K).
L*1: One top connecting bar.
M*4: Four base support bars.
Installation steps:
Step 1
Attach two main side frames (A*2) to two sets of step supports (B*2) using four connecting pieces (C*4) and twenty-nine screws (J*29) and forty-three nuts (K*43). Ensure the orientation is correct as shown in the diagram.
Step 2
Connect the top connecting bar (L*1) to the upper part of the assembled side frames using screws (J) and nuts (K).
Step 3
Attach the four base support bars (M*4) to the bottom of the side frames using screws (J) and nuts (K).
Step 4
Insert the eight step treads (D*8) into the designated slots on the step supports. Secure them with screws (J) and nuts (K) as indicated.
Step 5
Attach the handle support (G*1) to the top of the stool structure using the long bolts (I*4). Then, attach the two vertical handle supports (H*2) to the handle support (G*1) and the stool frame using screws (J) and nuts (K).
Step 6
Attach the two handle grips (E*2) to the top of the vertical handle supports (H*2). Ensure they are securely fastened.