Home › VASAGLE › VASAGLE BBC770-S Storage Cabinet Assembly Instructions PDF
ℹ️ Document Conversion Notice: This page was converted from the original file for easier reading. Diagrams/images may appear only in the original PDF below.
Document preview
File info: application/pdf · 22 pages · 3.34MB

VASAGLE BBC770-S Storage Cabinet

Model: BBC770-S

Brand: VASAGLE by SONGMICS HOME

Parts List

  • A: Left Side Panel
  • B: Base Panel
  • C: Right Side Panel
  • D: Back Panel
  • E: Top Panel
  • F: Shelf
  • G: Shelf
  • H: Support Bar
  • I: Top Support Bar
  • J: Back Support Bar
  • K: Shelf (x2)
  • L: Bottom Shelf
  • M: Base Support
  • N: Left Door
  • O: Right Door

Hardware List

  • 1: Cam Bolt (30 plus 2)
  • 2: Cam Lock (4 plus 1)
  • 3: Cam Dowel (38 plus 2)
  • 4: Screw (32 plus 2)
  • 5: Shelf Pin (8 plus 2)
  • 6: Bracket (x1)
  • 7: Handle Plate (x2)
  • 8: Handle Screw (x2)
  • 9: Hinge Plate (8 plus 2)
  • 10: Hinge (x4)
  • 11: Knob (14 plus 2)
  • 12: Wall Anchor Kit (x1)

Tools Required

Tools shown: Electric drill, screwdriver, pencil.

Note: Please use a manual screwdriver or an electric drill on a low-torque setting to prevent damage to the panels.

Connecting Piece Adjustment:

Action: Adjust the connecting piece direction until it is properly lined up with the hole.

Visual Description: Diagram shows a bolt and a connecting piece. An arrow indicates adjusting the connecting piece to align with a hole. A red 'X' symbol indicates incorrect alignment, and a green checkmark '✔️' symbol indicates correct alignment.

Action: Insert bolt when connecting piece direction is properly lined up.

Visual Description: Diagram shows a bolt being inserted into a panel after the connecting piece is aligned. A green checkmark '✔️' symbol indicates correct insertion.

Assembly Sequence:

  1. Insert connecting piece into panel.
  2. Align connecting piece with hole.
  3. Insert bolt.
  4. Tighten bolt.

Assembly Instructions

Step 1

Attach panel A to panel B. Use 2x hardware item 2 (Cam Locks) and 2x hardware item 4 (Screws).

Diagram shows panel A being attached to panel B with cam locks and screws.

Step 2

Attach panel C to panel D. Use 2x hardware item 2 (Cam Locks) and 2x hardware item 4 (Screws).

Diagram shows panel C being attached to panel D with cam locks and screws.

Step 3

Attach panels A and C to panel B. Use 24x hardware item 1 (Cam Bolts).

Diagram shows panels A and C being attached to panel B, secured with numerous cam bolts.

Step 4

Attach panel E to panels A and C. Use 2x hardware item 1 (Cam Bolts).

Diagram shows panel E (Top Panel) being attached to the top edges of panels A and C with cam bolts.

Step 5

Attach panel F to panel E. Use 2x hardware item 3 (Cam Dowels) and 2x hardware item 4 (Screws).

Diagram shows panel F being attached to panel E using cam dowels and screws. This likely represents a shelf or support attached to the underside of the top panel.

Step 6

Attach panel G to panel C. Use 2x hardware item 1 (Cam Bolts).

Diagram shows panel G being attached to panel C using cam bolts. This likely represents a shelf attached to a side panel.

Step 7

Attach panel E to panels F and G. Use 2x hardware item 1 (Cam Bolts).

Diagram shows panel E being attached to the structure, connecting to panels F and G. This step secures the top panel to the shelves.

Step 8

Attach support bar H to panel G. Use 2x hardware item 4 (Screws).

Diagram shows support bar H being attached to shelf G using screws.

Step 9

Attach panels A and B to the existing structure. Use 6x hardware item 4 (Screws).

Diagram shows panel A and panel B being attached to the partially assembled cabinet frame using screws.

Step 10

Secure the structure. Use 8x hardware item 3 (Cam Dowels).

Diagram shows cam dowels being inserted to secure the main cabinet structure.

Step 11

Attach base support M. Use 2x hardware item 1 (Cam Bolts).

Diagram shows base support M being attached using cam bolts.

Step 12

Attach bottom shelf L to base support M. Use 2x hardware item 3 (Cam Dowels) and 2x hardware item 4 (Screws).

Diagram shows bottom shelf L being attached to base support M using cam dowels and screws.

Step 13

Attach bottom shelf L to the main structure. Use 3x hardware item 3 (Cam Dowels) and 3x hardware item 4 (Screws).

Diagram shows bottom shelf L being further secured to the cabinet structure with cam dowels and screws.

Step 14

Attach back support bar J. Use 1x hardware item 3 (Cam Dowel) and 1x hardware item 4 (Screw).

Diagram shows back support bar J being attached using a cam dowel and screw.

Step 15

Attach top support bar I. Use 1x hardware item 3 (Cam Dowel) and 1x hardware item 4 (Screw).

Diagram shows top support bar I being attached using a cam dowel and screw.

Step 16

Install the wall anchor kit. Use 1x hardware item 12 (Wall Anchor Kit).

Diagram shows the wall anchor kit being prepared for installation.

Step 17

Secure the structure. Use 10x hardware item 4 (Screws).

Diagram shows screws being used to further secure the cabinet structure.

Step 18

Attach panels C and D to the structure. Use 12x hardware item 3 (Cam Dowels).

Diagram shows panels C and D being attached to the cabinet frame using cam dowels. (Note: Panel D is likely the back panel).

Step 19

Secure the structure. Use 12x hardware item 3 (Cam Dowels).

Diagram shows cam dowels being used to secure the main cabinet structure.

Step 20

Attach hinge plates (part of 9) to the doors N and O. Use 8x hardware item 9 (Hinge Plates).

Diagram shows hinge plates being attached to the doors.

Step 21

Attach bracket 6.

Diagram shows bracket 6 being attached.

Step 22

Attach hinges 10 to the doors N and O. Use 2x hardware item 7 (Handle Plates), 2x hardware item 8 (Handle Screws), and 4x hardware item 10 (Hinges).

Diagram shows hinges, handle plates, and handle screws being attached to the doors.

Step 23

Attach doors N and O to the cabinet. Use 4x hardware item 10 (Hinges).

Diagram shows the doors being attached to the cabinet frame via hinges.

Step 24

Attach knobs 11 to the doors N and O. Use 14x hardware item 11 (Knobs).

Diagram shows knobs being attached to the doors.

Step 25

Adjust doors for proper alignment. Use 8x hardware item 5 (Shelf Pins) for adjustment.

Diagram shows adjustment screws or pins being used to align the doors. An arrow indicates vertical adjustment.

Step 26

Insert shelves K into the cabinet. Ensure they are level and secure.

Diagram shows shelves K being placed into the cabinet.

Safety Warnings

Children are not allowed to assemble the product. During assembly, keep all small parts out of the reach of children as they may be fatal if swallowed or inhaled.

Children are forbidden to climb or play on the product to avoid serious bodily injury caused by the toppling.

In order to prevent overturning, this product must be used with the wall attachment device provided.

Installation shall be carried out exactly according to the manufacturer's instructions; otherwise, a safety risk can occur if incorrectly installed.

If there are any defective or missing parts after unpacking, cease assembly immediately and contact VASAGLE. Unauthorized change and modification may affect safety.

Models: BBC770-S, VASAGLE BBC770-S Storage Cabinet, VASAGLE BBC770-S, Storage Cabinet, Cabinet

Original Document

If the viewer doesn’t load, open the PDF directly.