iDance BC100 Bluetooth Karaoke System Instruction Manual

What's in the Box

Contents:

• 1. iDance BC100 main unit
• 2. Power Adaptor (12V DC / 2A)
• 3. Instruction Manual
• 4. Microphone x 1
• 5. Shoulder Strap x 1

[Illustration: iDance BC100 main unit, power adaptor, microphone, and shoulder strap.]

Warnings

[Illustration: Warning symbol - an exclamation mark inside an equilateral triangle, indicating important operating and maintenance instructions.]

[Illustration: Warning symbol - a lightning flash with an arrowhead inside an equilateral triangle, indicating hazardous voltage.]

WARNING: Do not attempt to open the back cover or power adapter. Opening or removing covers may expose you to dangerous voltage or other hazards, and will disable restricted servicing. There are no user-serviceable components inside.

FCC AND CANADIAN ICES

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This digital apparatus does not exceed Class B limits for radio noise emissions from digital apparatus as set out in Industry Canada's Radio Interference Regulations. These limits provide reasonable protection against harmful interference in a residential installation.

Recommendations:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades, one wider than the other. A grounding type plug has two blades and a third grounding prong. If the provided plug does not fit your outlet, consult an electrician.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and where they exit the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer. Use caution when moving a cart/apparatus combination to avoid injury from tip-over. [Illustration: Portable Cart Warning symbol.]
13. Unplug this apparatus during lightning storms or when unused for long periods.
14. Refer all servicing to qualified service personnel. Servicing is required if the apparatus is damaged (e.g., power cord, plug, liquid spilled, objects fallen inside, exposed to rain or moisture, does not operate normally, or has been dropped).
15. The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on it.
16. The battery shall not be exposed to excessive heat such as sunshine or fire.
17. The MAINS plug is used as the disconnect device and shall remain readily operable.

Features

• Supports Bluetooth wireless audio streaming
• Supports A2DP profile (Advanced Audio Distribution Profile)
• Supports automatic device pairing
• Wireless range: 33 feet
• USB charger for smartphone/tablet
• 3.5mm Aux input
• 6.3mm Microphones & Guitar input
• Easy access knob for volume control
• Audio output for external amplifier
• ON/OFF main power switch
• Build-in speaker
• Ultra light weight for perfect mobility
• 15W RMS Power Output

Contents

CONTROL LOCATION ..................................................................E1-E2

GENERAL OPERATIONS ..................................................................E3-E5

BLUETOOTH OPERATIONS ................................................................E6

AUX-IN OPERATIONS / USING SHOULDER STRAP .............................E7

CHARGING YOUR PORTABLE DEVICE / ENERGY SAVING ...................E8

TROUBLESHOOTING .......................................................................E9

SPECIFICATIONS .......................................................................E10

Control Location (1.1) - Front Panel

[Illustration: Diagram of the front panel of the iDance BC100 with numbered controls.]

1. Light Cover Lens
2. BELT Clip
3. ECHO Control: Turn to adjust the echo up or down.
4. MIC Level Control: Turn to adjust the MIC sound level up or down.
5. Party Light Activate: Press to turn on or off the light show.
6. Volume Control: Turn to adjust up or down.
7. STANDBY: Press to power the unit on or off.
8. PAIRING Indicator
9. PAIRING: Press and hold to begin pairing a Bluetooth device.
10. Power Indicator
11. Main Speaker

Control Location (1.2) - Rear Input & Control

[Illustration: Diagram of the rear panel of the iDance BC100 with numbered inputs/outputs.]

1. MIC Input 1, 2
2. GUITAR Input
3. AUDIO Output: Connect to external amplifier.
4. AUX Input
5. DC Input
6. USB CHARGER: Connect to other portable device you wish to charge.

General Operations

Power Connection

Before using your Bluetooth wireless system, connect the Power Adaptor to an AC outlet.

1. Firmly and securely insert the DC plug of the adaptor into the DC IN jack on the rear of the unit.
2. Plug the adaptor's AC plugs into an AC outlet.
3. Power on the unit by switching the POWER switch on the rear. The Pairing indicator will light RED to indicate standby mode.

[Illustration: Diagram showing the power connection from the AC adapter to the unit and AC outlet.]

When the unit is not operated by AC power or unused for long periods, remove the power adaptor from the wall outlet and unplug from the main unit.

Mic Connection

1. Plug the microphone into the MIC1 or MIC2 jack on the rear side. The output is mixed with playback from BLUETOOTH, USB PLAYER, or AUX IN.
2. Ensure the microphone's ON/OFF switch is set to ON during usage.
3. Microphone volume is adjusted by the MIC VOLUME knob on the rear, along with the speaker volume. (No independent microphone volume control).
4. You can now sing along with the music playback.

[Illustration: Diagram showing microphone connection to the rear of the iDance BC100.]

Guitar Connection

Plug a 6.3mm Guitar plug (or other Hi-Z instrument) into the GUITAR IN jack on the rear. The output is mixed with playback from BLUETOOTH, USB PLAYER, or AUX IN.

Audio Output Connection

To connect audio signal from the unit to your home audio system:

1. Locate RCA cables (not included).
2. Connect the audio cable's white and red plugs to the white and red AUDIO OUT jacks on the back panel of your unit.
3. Connect the other ends of the audio cable's plugs to the external unit's audio input jacks.

[Illustration: Diagram showing audio output connection from the unit to an external audio system.]

Echo Control

Adjust the ECHO control to enhance the singer's voice for a concert hall effect.

Party Lighting

Press the PARTY LIGHT ACTIVATE button to switch the party light show on or off. To change the light show mode, press the PAIRING button.

Bluetooth Operations

Pairing a Bluetooth Device for the First Time

1. Power on the unit using the STANDBY button. The LCD display will show "PAIRING", and the Pairing indicator will light BLUE and flash. Press and hold the PAIRING button for about 5 seconds. Remain within 3 feet of the unit during pairing.
2. On your Bluetooth device, select "BC1" in your Bluetooth settings to pair. If prompted for a password, enter "0000". Refer to your device's manual for specific pairing instructions.
3. Upon successful pairing, the unit will emit a "Connected" sound, the LCD will show "BT PLAYING", and the Pairing indicator will remain lit.

After initial pairing, the unit remains paired unless manually unpaired or reset. If the device becomes unpaired or fails to connect, repeat the above steps.

Playing Audio Wirelessly

1. After pairing, use your connected Bluetooth device's controls to select a track.
2. Play, pause, or skip tracks using your connected Bluetooth device's controls.
3. Audio played through the Bluetooth device will be heard through the speakers.
4. Adjust the VOLUME control for the desired volume level.
5. Press STANDBY to turn off the unit.

AUX-in Operations

Play music from other sources (iPod, MP3 players, etc.) by connecting the AUX IN JACK to your external player's audio out or headphone jack.

1. Plug one end of a 3.5mm audio input cable (not included) into the AUX IN input on the rear of the unit. Plug the other end into the audio output of your external music player or source. Ensure your external music player is turned ON.
2. Press the STANDBY button to power on the unit. The Pairing indicator will light BLUE and flash.
3. Start playing the device connected via AUX IN. The output is mixed with BLUETOOTH, USB PLAYER, or MIC IN playback.
4. Slowly adjust both the unit's volume control and the external device's volume control to reach a comfortable listening level.
5. Press STANDBY to turn off the unit. Remember to shut down the external player's power.

NOTE:

• If connecting to a Line Out Jack, only the unit's volume control may be needed. If connecting to a Headphone Jack, you may need to adjust both the external device's volume and the BC10's volume.
• If using AUX IN while Bluetooth audio is playing, the AUX IN audio will mix in when the cable is plugged. Unplugging the cable resumes Bluetooth audio. It is recommended to stop playback or disconnect the Bluetooth device when playing music via Line In mode.

Using Shoulder Strap

Use the SHOULDER STRAP (included) to connect to the right and left BELT CLIP on the top side of the unit for easy carrying.

[Illustration: iDance BC100 with shoulder strap attached.]

Charging Your Portable Device

This unit features a USB "CHARGER" port for charging portable devices (iPod, iPhone, Android phone, etc.) using the USB charging cord that came with your device.

1. Connect a power adaptor (see "Power connection") into the main unit. The USB "CHARGER" port's power cannot be controlled by the unit's main power switch.
2. Plug one end of the USB cable (not included) into the USB "CHARGER" Port on the back of the unit. Plug the other end into the device you wish to charge.
3. Observe your device's battery charge indicator; charging will start immediately.
4. Unplug the cable when your device is charged.

CAUTION:

• Before charging, consult your device's user manual to ensure the requested charging current does not exceed 1A (1000mA). Overloading the charge may occur.
• The USB "CHARGER" port supplies a DC 5V output at 1000mA maximum current for charging portable device batteries; it does not support other voltage ranges.
• Ensure your device's battery is rated for DC 5V only.
• The USB "CHARGER" port is for charging only and does not support data transfer or computer connection.
• Do not connect this unit's USB port to other external power charger USB ports, as this may damage both units and void the warranty.

NOTE:

• Some smartphones and portable devices use proprietary USB connections and circuitry, and may not charge when plugged into this port. Refer to your device's user manual before attempting to charge.
• It is normal for the unit to become warm while the USB port is in use for charging.
• Do not charge your smartphone for over 12 hours continuously.

Energy Saving (APS: Auto Power Off System)

The unit will automatically switch to Standby mode after 15 minutes in the following situations:

1. In Bluetooth mode: if there is no connection or Bluetooth device playback stops.
2. In MIC 1, 2 input: if microphones are switched OFF.
3. In AUX input: if external player playback stops.

Press STANDBY again to turn the unit on. The APS function is for energy saving.

Troubleshooting

Specifications

All features and specifications are subject to change without notice.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems).

This symbol on the product or packaging indicates it shall not be treated as household waste. It must be handed over to an applicable collection point for the recycling of electrical and electronic equipment. Proper disposal helps prevent negative consequences for the environment and human health. Recycling conserves natural resources. For more information, contact your local Civic Office, household waste disposal service, or the shop where you purchased the product.

[Illustration: Recycling symbol for electrical and electronic equipment.]