Instructions for Pepperl Fuchs models including: FB6208C Digital Output With Shutdown Input, FB6208C, Digital Output With Shutdown Input, Output With Shutdown Input, With Shutdown Input, Shutdown Input

542157 FB6208C

Digital Output with Shutdown Input;

Digital Output with Shutdown Input | Pepperl Fuchs | MISUMI

Data Sheet

Pepperl Fuchs-FB6208C, Digital Output w/Shutdown Input-542157 | ISC Sales


File Info : application/pdf, 3 Pages, 808.43KB

PDF preview unavailable. Download the PDF instead.

542157 eng
Digital Output with Shutdown Input
FB6208C
< 8-channel < Outputs Ex ib < Installation in suitable enclosures in Zone 1 < Module can be exchanged under voltage (hot swap) < Galvanic group isolation < Line fault detection (LFD) < Positive or negative logic selectable < Simulation mode for service operations (forcing) < Permanently self-monitoring < Output with watchdog < Output with bus-independent safety shutdown

Release date: 2022-07-06 Date of issue: 2022-07-06 Filename: 542157_eng.pdf
COM

Function
The device features 8 independent channels. The device can be used to drive low power solenoids, sounders, or LEDs. Open and short-circuit line faults are detected. The outputs are galvanically isolated from the bus and the power supply. The outputs can be switched off via a contact. This can be used for bus-independent safety applications.
Connection

8-

16-

IV

VIII

7+

15+

6

14

III 5+ VII 13+

4

12

II 3+ VI 11+

2

10

I

V

1+

9+

Zone 1, 21
Technical Data
Slots Occupied slots
Functional safety related parameters Safety Integrity Level (SIL) Performance level (PL)
Supply Connection Rated voltage Power dissipation Power consumption

Zone 1

2

SIL 2 PL d

backplane bus

Ur

12 V DC , only in connection with the power supplies FB92**

2.35 W

2.35 W

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group www.pepperl-fuchs.com

USA: +1 330 486 0002 pa-info@us.pepperl-fuchs.com

Germany: +49 621 776 2222 pa-info@de.pepperl-fuchs.com

Singapore: +65 6779 9091 pa-info@sg.pepperl-fuchs.com

1

Digital Output with Shutdown Input Technical Data

FB6208C

Internal bus

Connection

backplane bus

Interface

manufacturer-specific bus to standard com unit

Digital output

Number of channels

8

Suitable field devices

Field device

Solenoid Valve

Field device [2]

audible alarm

Field device [3]

visual alarm

Connection

channel I: 1+, 2-; channel II: 3+, 4-; channel III: 5+, 6-; channel IV: 7+, 8-; channel V: 9+, 10-; channel VI: 11+, 12-; channel VII: 13+, 14-; channel VIII: 15+, 16-

Current limit Open loop voltage Line fault detection

Imax 5.2 mA

Us

21.6 V

can be switched on/off for each channel via configuration tool

Test current

0.33 mA

Short-circuit

< 300 

Open-circuit

> 50 k

Response time

20 ms (depending on bus cycle time)

Watchdog

within 0.5 s the device goes in safe state, e.g. after loss of communication

Indicators/settings

LED indication

LED green: supply LED red: line fault , communication error red flashing

Coding

optional mechanical coding via front socket

Directive conformity

Electromagnetic compatibility

Directive 2014/30/EU

EN 61326-1:2013

Conformity

Electromagnetic compatibility

NE 21

Degree of protection

IEC 60529

Environmental test

EN 60068-2-14

Shock resistance

EN 60068-2-27

Vibration resistance

EN 60068-2-6

Damaging gas

EN 60068-2-42

Relative humidity

EN 60068-2-78

Ambient conditions

Ambient temperature

-20 ... 60 °C (-4 ... 140 °F)

Storage temperature

-25 ... 85 °C (-13 ... 185 °F)

Relative humidity

95 % non-condensing

Shock resistance

shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18

Vibration resistance

frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance

Damaging gas

designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3

Mechanical specifications

Degree of protection

IP20 (module) , a separate housing is required acc. to the system description

Connection

removable front connector with screw flange (accessory) wiring connection via spring terminals (0.14 ... 1.5 mm2) or screw terminals (0.08 ... 1.5 mm2)

Mass

approx. 750 g

Dimensions

57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch)

Data for application in connection with hazardous areas

EU-type examination certificate

PTB 97 ATEX 1074 U

Marking

1 II 2 G Ex d [ib] IIC Gb 1 II (2) D [Ex ib Db] IIIC

Release date: 2022-07-06 Date of issue: 2022-07-06 Filename: 542157_eng.pdf

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group www.pepperl-fuchs.com

USA: +1 330 486 0002 pa-info@us.pepperl-fuchs.com

Germany: +49 621 776 2222 pa-info@de.pepperl-fuchs.com

Singapore: +65 6779 9091 pa-info@sg.pepperl-fuchs.com

2

Digital Output with Shutdown Input Technical Data

Output

Voltage

Uo

Current

Io

Power

Po

Galvanic isolation

Output/power supply, internal bus

Directive conformity

Directive 2014/34/EU

International approvals ATEX approval
General information System information

Supplementary information

FB6208C
30 V 13.5 mA 404 mW (characteristic curve rectangular type) safe electrical isolation acc. to EN 60079-11, voltage peak value 375 V EN IEC 60079-0:2018+AC:2020 EN 60079-1:2014 EN 60079-11:2012 PTB 97 ATEX 1075 ; PTB 97 ATEX 1074 U
The module has to be mounted in appropriate backplanes and housings (FB92**) in Zone 1, 2, 21, 22 or outside hazardous areas (gas or dust). Here, observe the corresponding EC-type examination certificate. EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Assembly
Front view
LED green: Power supply

LED red: Line fault/ Communication error

Space for labelling

8

16

7

15

6

14

5

13

4

12

3

11

2

10

1

9

Socket for removable plug blue (accessory)

Accessories
FB9224* FB9225* FB9248*

Field Unit Redundancy Field Unit Field Unit

Release date: 2022-07-06 Date of issue: 2022-07-06 Filename: 542157_eng.pdf

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group www.pepperl-fuchs.com

USA: +1 330 486 0002 pa-info@us.pepperl-fuchs.com

Germany: +49 621 776 2222 pa-info@de.pepperl-fuchs.com

Singapore: +65 6779 9091 pa-info@sg.pepperl-fuchs.com

3



References

Techn. ation Pepperl Fuchs iText 4.2.0 by 1T3XT