iFi GO pod Max Quick Start Guide

1. Power

This section details the power and charging components of the GO pod Max.

Charging Case: The primary unit for storing and charging the earbuds.

Power Input: The charging case features a 5V/1A USB-C battery charge input port. ?

Image Description: Visuals show the charging case in an open state revealing earbud slots, and closed states in different colors (dark grey, teal, black). Another image shows the charging case with a USB-C port labeled "5V/1A USB-C Battery Charge Input".

2. Charging Case LED Status

The LED indicators on the charging case provide information about the battery level and charging status.

Battery Level Indicators:

75%
50%
25%
25% (lower bar)

? Note: The battery LED will flash when the case is charging.

Image Description: A diagram illustrates the charging case with its LED status lights. Bars represent battery levels: 75%, 50%, 25%, and a lower 25% bar.

3. Touch Control Area

The earbuds feature touch-sensitive controls for managing playback and calls.

Single Tap: Play/Pause audio or Answer an incoming call.
Double Tap: Reject an incoming call or Hang up an active call.
Double Tap: Skip to the next track (Forward).
Triple Tap: Skip to the previous track (Back).
Bluetooth Pairing: Hold the touch control area on both the left and right earbuds simultaneously for 2 seconds (≥2s) to initiate pairing mode.

Image Description: A close-up of an earbud highlights the "Touch Control Area" and "LED Indicator".

4. Microphone

Each earbud is equipped with a microphone for calls and voice commands.

Image Description: A diagram shows an earbud with the "Microphone" component clearly labeled.

5. Bluetooth Pairing