Voyager Radius Pro Electric Bike User's Manual

Introduction

Thank you for purchasing your new Voyager Radius Electric Bike and welcome to the Voyager family. We hope that you'll do plenty of exploring on your new bike. Please enjoy your new bike responsibly and be sure to read the entire instruction manual before your first use. Have a blast, be safe and Get Moving!

Package Contents

• Voyager Radius Electric Bike
• Bike Seat
• Charger
• Tightening Tool*
• User's Manual with Warranty Information

*Use the tightening tool to keep the fenders securely in place. Check to make sure all parts are securely attached and in good condition before riding.

Specifications

Hardware

• Motor Power: 450W Rated/500W Max
• Charging Time: ~5 hours
• Battery Specifications: 48V/7.5AH Lithium-Ion
• Display Type: Digital LCD Display

Performance

• Max Speed: ~24-25 MPH
• Max Load: 300 lbs.
• Max Climbing Ability: ~30°
• Max Range: Up to 18 Miles

General

• Solid Tire Size: 16 In. Pneumatic
• Weight: 42 lbs.
• Brakes: Rear Mechanical Disc Brake
• Suspension: Cushioned
• Folded Size (L/W/H): 28/13.3/ 27.3 inches
• Unfolded Size (L/W/H): 53.5/15/42.5 inches

NOTE: Specifications may vary depending on the size of the rider, weather conditions and road conditions. For peak performance, make sure that your bike is properly maintained.

A Quick Look

The Voyager Radius Pro Electric Bike features the following components:

• 1. Front Tire
• 2. Headlight
• 3. Stem Quick Release
• 4. Handlebar
• 5. Seat Clamp
• 6. Seat
• 7. Stand
• 8. Reflector
• 9. Charging Port
• 10. Rear Fender
• 11. Shock Absorber
• 12. Chain
• 13. Foot Pedal
• 14. Front Fender
• 15. Kick Stand
• 16. Frame
• 17. Handbrake

The handlebar controls include:

• Light Switch: Controls the front headlight.
• Horn: Activates the bike's horn.
• Display Screen: Shows speed, battery level, and other information.
• Twist Throttle: Used for acceleration in pedal assist and full electric modes.
• Power Button: Powers the bike on or off.

Assembly Guide Video

For more information on assembling and using your bike, scan the QR code provided in the original document for additional video tutorial content.

Assembly

Step 1: Unfolding the Bike

Unfold the Radius Pro E-Bike and lock the latch in the center of the bike frame. Ensure that the connecting wires are recessed into the pass-through holes to prevent them from being pinched when the frame is locked in the unfolded position.

Step 2: Connecting the Handlebars

Insert the handlebar stem into the recessed hole above the front wheel. Lift the handlebar into the upright position before pressing down on the latch to lock it in place. Align the handlebar and front wheel so that the front wheel is perpendicular to the back wheel. Unlatch the handlebar and fold it down to reveal the locking bolt. Securely tighten the locking bolt using the larger Allen key tool provided. Finally, lift the handlebar into the upright position and lock it by pressing down on the lever until it snaps closed.

Assembly (continued)

Step 3: Attaching the Seat

Loosen the seat angle bolt using the provided wrench tool and adjust the seat to a comfortable upright position. Tighten the seat angle bolt to secure the seat position. The seat clamp can be loosened to attach or remove the seat, and the seat height can be adjusted for comfort. Once the seat is at the desired height, close and tighten the seat clamp to ensure it stays securely in place. Note: Twist the pin on the seat clamp to adjust its tension for locking the seat height.

Step 4: Assembly Complete

Your Voyager Radius Pro Electric Bike assembly is now complete.

Charging the Battery

Before riding, ensure the battery is charged by following these steps:

1. Remove the rubber gasket covering the charging port, then connect the charger.
2. Plug your charger into a suitable power outlet.
3. The LED light on the charger turns RED while charging and GREEN when charging is complete.

Charging Port Description: The charging port is located on the bike frame and is covered by a rubber gasket.

Notes:

• Please charge the battery for at least 5-8 hours before first use.
• To maximize battery lifespan, unplug the charger once the battery is fully charged.
• Ensure the charging port is covered after charging to protect it from dirt and debris.
• Charge the battery at least once per month.
• Do not power on the bike while charging the battery.
• Only use the supplied charger. Contact the manufacturer if the charger becomes damaged.

Powering On/Display Screen

Description of image: A close-up view of the handlebar area showing the Display Screen and the Power Button.

Powering On

Before powering on, ensure the battery is fully charged and the tires are properly inflated. Press and hold the power button to turn the bike on or off.

Display Screen

The display screen shows a power meter indicating remaining battery life. It also displays the current speed. Charge the battery regularly.

Bike Features

Once powered on, you can access the following features:

Description of image: A close-up view of the handlebar area showing the Light Switch and Horn button.

Light Switch

Slide the light switch to the ON position to activate the front headlight for improved visibility. Slide it to the OFF position to turn off the headlight.

Horn

Press the horn button to sound the bike's horn. Use sparingly, primarily in situations that enhance safety.

Handbrake

Squeeze the handbrake when necessary to reduce speed. Avoid abrupt braking at high speeds to ensure safety and prolong tire life. The hand brake is located on the right handlebar and is used to decelerate or come to a complete stop in all modes.

Before You Ride

Before riding, it is important to check that your bike fits properly. Riding a bike that does not fit can endanger the rider and increase the risk of accidents or injury. If the bike does not fit properly, contact the place of purchase to replace it with a suitable model.

Appropriate Frame Height Measurement

To ensure rider safety and comfort, there should be a minimum clearance of 1 inch between the top tube of the bicycle and the rider's crotch when straddling the bike with both feet flat on the ground. Women may use a men's style bicycle to determine the correct clearance measurement for a women's style bicycle.

Description of diagram: A silhouette of a person standing next to the bike, with a dotted line and label indicating ">1 INCH" clearance between the top tube and the rider's crotch.

Riding Your Bike

Manual Mode

Power off the bike to use it in manual mode. To accelerate, pedal the bike with your legs and feet. Squeeze the hand brake on the left handlebar to decelerate or come to a complete stop.

Pedal Assist

Power on the bike to access pedal assist mode. To accelerate, pedal the bike with your legs and feet. For additional assistance, twist the throttle on the right handlebar for extra speed. Squeeze the hand brake to decelerate or come to a complete stop.

Description of image: A close-up of the bicycle's foot pedals. Text: "Use the foot pedals to accelerate in manual or pedal assist modes."

Full Electric

Power on the bike to access full electric mode. Twist the throttle on the right handlebar for full power. Squeeze the hand brake to decelerate or come to a complete stop. Press the button on the display screen to cycle through three different full electric speed modes.

Electric Speed Modes

• Mode 1: Slow
• Mode 2: Medium
• Mode 3: Fast

Description of image: A close-up of the handlebar twist throttle. Text: "Twist the throttle on the right handlebar to accelerate in pedal assist and full electric modes."

Care & Maintenance

Maximizing Range

Your bike has a maximum range of 18 miles on a fully charged battery. Factors reducing range include:

• Rider Weight: Suitable for riders 300 lbs and under. Heavier riders require more power.
• Surface and Weather Conditions: Ride on smooth, flat surfaces in clear, dry conditions for maximum range.
• Temperature: Extreme temperatures affect battery performance.
• Maintenance: Ensure the bike is in good condition and tires are properly inflated.
• Riding Style: Avoid sudden stops and frequent starting/stopping to maximize battery life.

Keeping Your Bike Clean

Clean your bike with a slightly damp cloth and ensure it is completely dry before use. Do not use harsh chemicals or detergents, and never submerge the bike in water.

Battery Maintenance

Keep the bike and battery away from excessive heat, fire, flames, physical shock, or excessive water/moisture. Do not attempt self-repair. Contact the manufacturer or a qualified technician for service.

Tire Maintenance

Check tire pressure regularly. Both front and rear tires should have a pressure of 2.8 Bar (~40psi). Contact a qualified bicycle repair technician for tire replacement.

Storage

Store your bike in a cool, dry place, away from dust and debris. Charge the battery at least once per month. Do not charge in cold environments below 50°F.

Local Laws

Research local regulations and country-specific laws before purchasing or operating any motorized vehicle. Users are responsible for complying with all applicable laws and regulations. Voyager waives liability related to product use.

FCC Compliance

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warranty

This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

What Is Not Covered by Warranty

Damages or malfunctions not resulting from defects in material or workmanship, and damages or malfunctions from other than normal use, including but not limited to, repair by unauthorized parties, tampering, modification, or accident.

To Obtain Warranty Service and Troubleshooting Information:

Call (877) 444-0345 in the U.S. or visit our website at www.ridevoyager.com.

To receive warranty service, along with the name and address of an authorized product service center, the original consumer purchaser must contact Voyager for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty period(s), MUST be presented to obtain the requested service. It is your responsibility to properly package and send any defective products, along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired.