Instructions for UNISENSE models including: High Performance Microsensors, Performance Microsensors, Microsensors

Instructions for packing microsensor

Sales Conditions and Warranty - Unisense

Instructions for correct packing of microsensors

• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 49.70KB

Document Document

Instructions for correct packing of microsensors
1. Placing the first membrane inlay Place one membrane inlay in the box with the membrane side up.
2. Place sensor on membrane Place the sensor(s) with protection tube(s) on the membrane but leave the wires hanging outside the box. To the extent possible, please place the sensor(s) on the membrane.
3. Sensor between the two membranes Place the second membrane inlay with membrane side down onto the sensor(s). Secure the wires in the plastic clips on the cardboard part of the upper side of the inlay.
4. Close and ship Close the lid and push the lid tabs into the slots in the box sides.
Version: January 2020