Product Overview
This document provides dimensional specifications for the MMH 1120 and HMW 622 built-in appliances, manufactured by Kuppersberg. These technical drawings illustrate the external dimensions required for installation.
Dimensional Data
The following table details the key measurements of the appliance:
| Dimension | Value | View/Context |
|---|---|---|
| Overall Width | 595 | Front/Top View |
| Overall Height | 390 | Front View |
| Unit Height | 300 | Side View (main body) |
| Unit Depth | 65.45 | Side View (main body depth) |
| Mounting Base Height | 10.61 | Side View (detail of base/mounting) |
| Rear Protrusion | 0.11 | Side View (detail of rear protrusion) |
| Overall Height (with base) | 313 | Side View (total height including base) |
Visual Representation Description
The provided diagrams are technical line drawings illustrating the appliance from multiple perspectives:
- Front View: Shows the rectangular face of the appliance with a central display/control panel area and a distinct section on the right. Dimensions indicate an overall width of 595 mm and height of 390 mm.
- Side View: Displays the depth and height of the appliance. The main unit depth is 65.45 mm, with a total height of 300 mm for the unit itself. A mounting base extends below, adding 10.61 mm to the height, resulting in an overall height of 313 mm. A small protrusion of 0.11 mm is noted at the rear. The side view also clearly shows ventilation grilles.
- Top View (implied): The width dimension (595 mm) from the front view also applies to the top. The drawing shows the top surface, including the rounded edges and ventilation details.
- Isometric View: Provides a three-dimensional perspective, showing the appliance integrated into a cabinet or wall opening, highlighting its front panel and the depth of the unit.
Ventilation grilles are visible on the side and top surfaces of the appliance in the drawings.
