Safety Information
- Do not completely tighten screws until all screws are started. Tighten each bolt firmly and properly.
- Some parts may contain sharp edges. Wear protective gloves as necessary.
- Children under the age of 16 should not be engaged in the assembly, removal or disassembly of the product.
- Children under the age of 10 should be supervised by a competent adult while using this furniture.
- Please keep children out of the assembly area.
- This set is heavy, and may require two adults for safe assembly.
- Never use this product as a support. Do not shake, lean, or climb on the product at any time.
⚠️ DANGER: Do not allow children to play with plastic wraps or small parts to prevent potential choking hazard.
⚠️ CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty assembly and potential injury!
Warranty
LIMITED WARRANTY
This is a limited warranty, and applies to the original purchase. This is a residential warranty and does not apply to commercial use. This collection carries a (1) year limited warranty and is valid from the original date of purchase to the original owner (proof of purchase required).
WHAT IS COVERED
We warrant the frame to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing, and abuse. In addition, purchased parts are not covered under this warranty. We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production. For a copy of our full limited warranty, please contact our customer service team.
Package Contents
| Part | Quantity | Description/Picture Reference |
|---|---|---|
| A | 1 | Refer to the red circles for screw hole position. |
| B | 1 | Refer to the red circles for screw hole position. |
| C | 2 | Refer to the red circles for screw hole position. |
| D | 1 | Refer to the red circles for screw hole position. |
| E | 1 | Refer to the red circles for screw hole position. |
| F | 1 | Refer to the red circles for screw hole position. |
| O | 3 | Cushions. |
| P | 3 | Cushions. |
Please note that this package contains sponges but does not include a fabric shell. The shell is shipped separately in another package and needs to be installed by the customer. If you have not received it at the same time, please be patient and wait. Thank you.
Hardware Pack
| Part | Quantity | Description | Picture Reference |
|---|---|---|---|
| G | 2 | M6 X 82mm Bolt | [M6 X 82mm Bolt] |
| H | 6 | M6 X 45mm Bolt | [M6 X 45mm Bolt] |
| I | 8 | M6 X 25mm Bolt | [M6 X 25mm Bolt] |
| J | 20 | M6 Metal Washer | [M6 Metal Washer] |
| K | 4 | M6 Spring Washer | [M6 Spring Washer] |
| L | 4 | M6 Nut | [M6 Nut] |
| M | 1 | M6 Hex Wrench | [M6 Hex Wrench] |
| N | 1 | M8 Wrench | [M8 Wrench] |
NOTE: Hardware not shown to actual size.
Assembly Instructions
Assemble the item on a soft, non-abrasive surface, such as carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items.
NOTE: Identify all parts packed in the carton against the parts list. Remove all protective material carefully and DO NOT use a knife to prevent scratching the furniture.
Important Assembly Note: Do not tighten any screws until all screws have been inserted into their holes; otherwise, it may cause some holes to misalign.
Step 1
Before: Two parts labeled 'C' are shown.
After: The two 'C' parts are joined together. A detailed view shows screws (H, J, K, L) and a wrench (M) being used to connect parts. Pay attention to assembling.
Detail shows connection points and hardware.
Step 2
Before: A frame structure is shown, with part 'F' (legs) to be attached.
After: Part 'F' is attached to the frame. A detailed view shows screws (J, I) being used to secure part 'F'.
Detail shows attachment of part F using hardware J and I.
Step 3
Before: Parts 'A' and 'B' (side frames) are shown, along with the assembled base from Step 2.
After: Parts 'A' and 'B' are attached to the base. A detailed view shows screws (J, I) and washers (J) being used for connection.
Detail shows connection of side frames A and B using hardware J and I.
Step 4
Before: Parts 'E' and 'D' (back panels) are shown.
After: Parts 'E' and 'D' are attached to the main frame. A detailed view shows screws (J, K, G, L) and washers (J) being used for connection.
Detail shows attachment of back panels E and D using hardware G, J, K, L.
Step 5
Before: The partially assembled sofa frame is shown.
After: The sofa frame is further assembled. A detailed view shows screws (H, J) being used for connection.
Detail shows connection points using hardware H and J.
Step 6
Before: The main sofa structure is shown.
After: The sofa structure is completed. A detailed view shows screws (I, J) being used for final assembly.
Detail shows final assembly connections using hardware I and J.
Step 7
Before: The assembled sofa frame is shown.
After: Cushions (O and P) are placed on the sofa. The product is now complete.
Cleaning and Maintenance
- Clean the furniture with a damp cloth, rinse thoroughly. Dry frame parts completely. Do not use bleach, acid, or other solvents on the textile or metal parts.
- We recommend the use of furniture covers to protect the product when not in use.
- Inspect and tighten all screws on a regular basis to ensure proper performance and safety.
- In order to prolong the life and beauty of your product, we recommend storing it in a dry and protected area during off-season periods.
Customer Service
Questions, problems, missing parts? Before returning to the store, please contact our Customer Service:
- Email: service@alphamarts.com
- Phone: 1-877-606-2818
Thank you for choosing Alphamarts.
