Aoocci BX Smart Motorcycle Console

Overview

The Aoocci BX motorcycle smart car system features BSD radar rearview lane change assistance and early warning capabilities. It is also equipped with 1080P high-definition front and rear dual recording cameras to record riding conditions in real time. Supports intelligent functions such as wireless screen projection for mobile phones, motorcycle navigation, and operation of mobile phone apps. Equipped with a 5.5-inch high-brightness display screen and GPS high-precision satellite positioning function, it provides you with an intelligent and convenient riding experience. The main unit is equipped with IP68 dust and water resistance, It can easily handle harsh outdoor environments.

Main Body and Accessories

• Host*1: The main unit of the Aoocci BX system.
• Millimeter wave radar*1: For BSD radar and early warning functions.
• Camera*2: High-definition front and rear cameras.
• Tire Pressure*2: Sensors for monitoring tire pressure.
• GPS*1: For high-precision satellite positioning.
• Controller: For device operation.
• Wiring Harness*1: Connects the system components.
• Power*1: Power supply unit.
• Fixed Base*1: A mounting base.
• Quick Release Bracket*1: For easy attachment/detachment.
• L-Bracket*1: An L-shaped mounting bracket.
• Z-Type Bracket*1: A Z-shaped mounting bracket.
• Reducer Ring*4: Rings for adjusting mounting bar size.
• Storage Card 64G*1: A 64GB memory card.
• Tools*5: Assorted tools for installation.

Parts Details

Speaker outlet: Location for audio output.

Vibration dampener: Reduces vibration.

TF card slot: For inserting the memory card.

22mm ball head: A component for mounting.

Microphone: For audio input.

Installation Guide

TF Card Installation

[Note]

1. Use a high-speed TF card (Class 10 or above) with a minimum capacity of 16GB and maximum capacity of 128GB.

2. After installation, format the TF card before first use.

The product is equipped with a 64GB memory card and it has been installed in the equipment at the factory.

Format TF Card

Navigate to Host-Settings -> Format memory card.

Vehicle Installation

Select the appropriate reducer ring based on the mounting bar:

• 16mm
• 22mm
• 24.5mm
• 28mm

Bracket Installation Diagrams

Ball Head Bracket Installation

Diagram shows a ballhead, fixed base, reducing ring, and a 12-28mm bar.

Z-Type Bracket Installation

Diagram shows a quick release module, ball head, fixed base, Z-type bracket, and a motorcycle rearview mirror. Includes a 10mm measurement indicator.

Controller Installation on L-bracket

Diagram shows an L-bracket, controller, and motorcycle rearview mirror. Includes a 10mm measurement indicator. Note: The displayed angle is illustrative. Set it to your desired position for practical use.

Wiring Diagram

Diagram illustrating connections between components:

• (1) Wiring harness connects to the host extension cable.
• (2) Rear-CH2 cable connects to the rear camera.
• (3) Front-CH1 cable connects to the front camera.
• (4) Controller cable connects to the controller.
• (5) GPS cable connects to the GPS.
• (6) Power cable connects to the host power cable.
• (7) Power cable B+ connects to the positive terminal of the battery.
• (8) Power cable GND + (11) radar's black (negative) cable connects to the negative terminal of the battery.
• (9) Power cable ACC + (10) radar's red (positive) cable connects to the battery ACC cable.
• (12) Front/rear tire pressure sensors. Please install on the corresponding tire.

Installation Notes

GPS Installation Notes

Remove the backing of the 3M adhesive tape and install it onto the bike frame.

1. Do not install under carbon fiber parts.

2. Cannot be blocked by metal parts.

3. Install away from camera, camera wiring, and host as possible.

4. If GPS cannot receive signal, change the installation location.

Camera Installation Notes

Tear off the backing of the 3M adhesive and stick the front/rear camera to the front/rear of the motorcycle.

1. The camera can be rotated 180° forward and backward by loosening the screws.

2. Please adjust the camera arrow mark to face upwards.

3. Please clean the surface before applying the adhesive. When attaching, press firmly for at least 10 seconds and let it sit for 30 minutes to ensure the best adhesion.

4. If the camera is installed in reverse, please rotate it 180° and adjust the angle accordingly.

Radar Installation Notes

Tear off the backing of the 3M adhesive and install the radar at the rear of the motorcycle. Installation height should be 60-90cm from the ground and the radar should be 90° from the ground.

1. The radar can be rotated 180° forward and backward by loosening the screws.

2. Please wipe the surface of the pasting position. When pasting, press with all your strength for more than ten seconds and let it stand for 30 minutes to ensure the best pasting effect.

Tire Pressure Installation Precautions

By installing a tire pressure detection sensor, the real-time tire pressure can be read, and a pop-up window will appear when the alarm threshold is reached.

Battery life: 1 year

Size parameters: 22.7x18.05mm

Battery replacement: CR1632

Tire pressure monitoring range: 0 to 100 psi (0 to 689 kPa)

Tire temperature monitoring range: -40°C to 125°C

The battery can be replaced with tools.

Operation and Interface Introduction

Main Screen (主界面)

Diagram of the main screen showing compass, speed, radar status, time, etc.

• ① Compass
• ② Screen projection
• ③ Dashcam
• ④ Time display
• ⑤ Radar setup ⚙️
• ⑥ Settings ⚙️
• ⑦ Tire pressure display
• ⑧ Speed display
• ⑨ Video recording status
• ⑩ TF card status
• ⑪ BSD status
• ⑫ GPS status
• ⑬ WI-FI status
• ⑭ Bluetooth status

Swipe Down Adjustment Interface

Accessed by swiping down from the top of the screen.

• ① Volume adjustment: Slide to adjust the volume.
• ② Brightness adjustment: Slide to adjust the screen brightness.
• ③ Auto brightness: Auto screen brightness can be turned on/off.

When wirelessly projecting the screen, the volume and brightness need to be adjusted through the virtual keys.

Recorder Interface

Controls for video recording:

• 1. Speed display
• 2. Compass
• 3. Video replay
• 4. Turn on/off the video recording ▶️/⏹️
• 5. Photo button ?
• 6. Turn on/off the recording
• 7. Locked video ?
• 8. Recorder Settings ⚙️
• 9. Front and rear camera switching ?

When the ordinary video storage space or the emergency video storage space is full, the system will automatically delete the earliest recorded video to activate the loop recording function.

Recorder Setting Interface

• 1. Video duration: Set recording duration (1, 2, or 3 minutes).
• 2. Post-recording Settings: Adjust rear camera mirror settings.
• 3. Collision sensing RCW: Locks video upon collision.
• 4. Sentinel Mode: Records when vehicle is parked and detects collision.
• 5. Recording switch: Turn recording on/off.
• 6. Format SD card: Clears all files.

Radar Setting Interface

• Radar pairing: Click pairing button to bind radar devices.
• Unbinding radar: Unbind the radar.
• Radar switch: Set the radar on/off ⚙️/?.
• Radar image: Enable radar base display upwards.
• Radar rearview: Displays rear media image when radar signal is detected.
• Buzzer: Enables alarm sound when radar signal is detected.

Screen Projection Interface

• 1. Help: Instructions for screen projection connection.
• 2. CarPlay: For iPhone screen projection.
• 3. Auto: For Android phone screen projection.

System Settings

• 1. Function: Set tire pressure, WiFi, audio, GPS, time format, navigation.
• 2. Time and Date: Set manually.
• 3. Language: Multilingual settings.
• 4. Unit of speed: Set speed unit.
• 5. About this machine: View device information.
• 6. Factory data reset: Restore factory settings.

Tire Pressure Setting Interface

• 1. Bind the front wheel: Bind sensor ID.
• 2. Bind the rear wheel: Bind sensor ID.
• 3. Low-voltage alarm value: Set threshold for low tire pressure.
• 4. High-voltage alarm value: Set threshold for high tire pressure.
• 5. Tire pressure unit: Select unit (e.g., Bar, psi).
• 6. Temperature: Set unit (°C/°F).

Radar Rearview

Radar Rearview Warning Interface

Visual and audio alerts for vehicles detected behind.

Detection Range: Maximum probing distance: 20m, Maximum probing width: 9m, Angle: 75°.

Warning Logic:

1. Vehicle on left rear: Left area turns red/flashes, rear camera and beep activate.

2. Vehicle on right rear: Right area turns red/flashes, rear camera and beep activate.

3. Vehicle directly behind: Both sides flash red, rear camera and buzzer activate.

Remote Controller Button Operation (线控器按键操作)

At Work

When the call comes on

Radar System Description: Millimeter-wave radar provides precise rearview early warning by measuring distance and monitoring vehicles in blind spots. Activates RRV warning mode with visual (flashing lights) and audio (buzzer) alerts.

Real-time image: The rear camera automatically turns on, providing intuitive information about the road conditions behind.

WiFi Video APP

1. Scan the QR code to download the motonaviAPP. Follow the operation instructions within the APP.

WiFi Recorder

1. WiFi recorder: Enter the WiFi recorder interface to view real-time images.

2. Recorder screen: Displays the current real-time image.

3. Full-screen button: View the recorder in full screen.

4. Switch button ?: Switch between front/rear camera images.

5. Stop or start the video recording ▶️/⏹️: Control recording on/off.

6. Sound switch ?/?: Turn sound recording on/off.

7. Equipment album: View recorded videos/pictures.

8. Local album: View downloaded videos/pictures.

OTA Upgrade and Personal Center

OTA Upgrade

1. OTA upgrade: Enter the OTA upgrade interface.

2. Current version: Display current system version.

3. Upgrade: Retrieve and install new versions. Do not power off during upgrade; the device will restart automatically.

Personal Center

• 1. Personal information
• 2. Equipment Management
• 3. Problem feedback
• 4. Offline map
• 5. Insurance purchase date
• 6. Version information

Product Features

Frequently Asked Questions

1. Memory full and cannot loop video recording:
   • 1.1 Format the TF card first. If no prompt, format manually.
   • 1.2 Check camera display. Abnormal display can cause no recording.
   • 1.3 Format TF card again or replace it if abnormalities persist.
2. Automatic power on/off: Check if parking monitoring is enabled. It turns on/records on collision/shaking and shuts down automatically.
3. No image when camera is inserted:
   • 3.1 Check plug connection and cable tightness.
   • 3.2 Try cross-connecting front and rear cameras.
4. Screen freezes or key response is slow during recording:
   • 4.1 Ensure a high-speed (Class 10) memory card is used. Non-high-speed cards may cause issues. Choose brand memory cards.
5. Settings not saving after time/function changes: This can occur during abnormal power outages.

Disclaimer

Special note: The machine must be in a normal video recording working state to record video files. The following situations may lead to image damage or loss:

• 1. Removing the TF card during recording can damage or lose the last video file.
• 2. Power cut-off during recording can damage or lose the last video file.
• 3. Damage or loss of video files caused by destructive collisions to the machine.
• 4. Memory card becoming loose due to excessive collision may damage or lose the video file.
• 5. Recorded videos are for reference only. The company is not responsible for bad files or data loss due to abnormal operation.

Notes:

This equipment is guaranteed for one year from the date of purchase, except for damage caused by human error or abnormal use. If there is no relevant purchase voucher, the warranty period will be implemented from the production date of the product.