PATLITE SZ-016A Circular Bracket
Model: SZ-016A
Safety Precautions
In order to prevent any damage to the user and other personnel or to assets, note the following:
The following symbols classify the following precautions into two categories and explain the level of harm inflicted when caution is disregarded while using this product.
[WARNING] Indicates an imminently dangerous condition: failure to follow the instructions may lead to death or serious injury.
[CAUTION] Indicates a potentially dangerous condition: failure to follow the instructions may lead to slight injury or property damage.
Installation
Before wiring, please mount it correctly as follows:
- Loosen the hexagon socket set screw on the side of a mounting base. (Get the hexagonal wrench ready. The opposite side is 2mm.)
- Remove the accessory nuts on a pole.
- Insert the rubber bushing into the pole.
- Insert a pole into a mounting base from the top to the bottom.
- Fix a pole with the hexagon socket set screw on the side of a mounting base.
- Install this product in your machine with bonded washers. (Recommended torque: 1.1 Nm)
[CAUTION] Change the rubber bushing to maintain waterproof condition when the pole is removed from SZ-016A.
Diagram Description: Installation Components
The diagram illustrates the components and assembly for the circular bracket installation. Key parts shown include:
- Pole: The vertical support element.
- Rubber Bushing: Inserted into the pole to ensure a proper fit and maintain waterproofing.
- Hexagon Socket Set Screw: Used to secure the pole to the mounting base.
- M4 Screw: A type of screw used in the assembly.
- Bonded Washer (Accessory): Used for installing the product onto machinery.
The diagram shows the M4 screw and hexagon socket set screw connecting the pole to the mounting base, with the rubber bushing inside the pole.
Dimension Drawings
Dimensions are provided in millimeters (mm).
Main Bracket Dimensions:
- Overall Diameter: ⌀89
- Hole Pattern Diameter: ⌀54
- Mounting Holes: 4 holes with ⌀10 diameter
- Central Hole Diameter: ⌀17.5
Pole Insertion Area Dimensions:
- Outer Diameter of Insertion Area: ⌀32
- Insertion Size of Pole: ⌀21.9
- Insertion Depth of Pole: 32
- Secured by: 2 x M4 screws
The diagram shows a top view and a side view of the bracket, detailing the placement and size of mounting holes, the pole insertion diameter, and depth.
Repair Parts
Rubber Bushing
Compatible Models: Pole mount type with a pole diameter of ⌀21.7 mm (e.g., LU7, RUP, RSP series, etc.).
[Note] When waterproofness is necessary, please use a steel pole.
