How to Synchronize Your TOTOLINK Router's System Time with Internet Time

Applicable Models

This guide is suitable for the following TOTOLINK router models: N100RE, N150RT, N200RE, N210RE, N300RT, N302R Plus, A3002RU.

Application Introduction

You can maintain the system time on your router by synchronizing it with a public Network Time Protocol (NTP) server over the Internet. This ensures accurate timekeeping for logs, scheduled tasks, and network operations.

Setup Steps

STEP-1: Log in to the TOTOLINK Router

Open a web browser and enter the router's IP address (usually 192.168.1.1 or 192.168.0.1) to access the TOTOLINK router's web interface. Log in with your administrator username and password.

STEP-2: Configure Time Zone Settings

In the left-hand menu of the router's interface, navigate to System, then select Time Zone Setting. Follow the steps below:

1. Time Set Type select: Choose how the time will be set.
2. Time Zone select: Select your local time zone from the dropdown list.
3. Enter NTP Server: Input the addresses of NTP servers.
4. Click Apply: Save the current settings.
5. Click Update now: Initiate the time synchronization.