LCD Displays, Projectors, Desktop Monitors, Digital Signage
Installation Guide for NEC models including: ME Series, MultiSync Large Format, ME Series MultiSync Large Format, Large Format, Format
NEC Display Solutions of America, Inc. MultiSync ME Series Large Format Installation Guide [Ver.1.1] www.necdisplay.com MultiSync ME Series Large Format Displays Page 1 of 19 Contents:
NEC MultiSync ME431-AVT3 ME Series - 43" LED-backlit LCD display - 4K Stand by 0.5 Watt Dimensions (WxDxH) - without stand 38.3 in x 2.5 in x 22.1 in Weight 30.64 lbs Environmental Standards ENERGY STAR Qualified Manufacturer Warranty 3-year warranty PDF: Click HereClick Here
File Info : application/pdf, 19 Pages, 5.25MB
DocumentDocumentNEC Display Solutions of America, Inc. MultiSync ME Series Large Format Installation Guide [Ver.1.1] Contents: Product Description and Notes Rotation Ventilation Recommendations Display Dimensions Optional Stand Dimensions Optional Wall Mount Dimensions Optional Speaker Dimensions Intel® Smart Display Module Integration Compute Module Integration Input Panel ASCII Commands PD Comms Tool Cable Connection Browser Control Product Description: Type: LCD Display Resolution: 3840 x 2160 Aspect Ratio: 16:9 EMI: Class B Page 1 Page 1 Page 2 Pages 3-10 Page 11-12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 18 Page 19 Page 19 *Absolute Max refers to when the display is at full brightness with all slots active and volume at 100. NOTES: This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to be a step-by step procedure for installation. Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local building codes. All mounts should make secure contact to wood studs. Distances are in inches, for millimeters multiply by 25.4. Distances may vary ±5%. www.necdisplay.com MultiSync ME Series Large Format Displays Page 1 of 19 NEC Display Solutions of America, Inc. Rotation: If display is to be used in portrait orientation, rotation needs to be counterclockwise. Ventilation Recommendations: Dimensions below are minimum recommended for proper ventilation. NOTE: The above are recommendations in order to keep your display as cool as possible. If the distances are less than the 100mm, extra ventilation may be necessary. The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations. www.necdisplay.com MultiSync ME Series Large Format Displays Page 2 of 19 Display Dimensions ME431: NEC Display Solutions of America, Inc. www.necdisplay.com MultiSync ME Series Large Format Displays Page 3 of 19 Display Dimensions ME431 cont'd: NEC Display Solutions of America, Inc. NEC strongly recommends using size M6 screws (10-12mm + the thickness of the bracket and washers in length). www.necdisplay.com MultiSync ME Series Large Format Displays Page 4 of 19 Display Dimensions ME501: NEC Display Solutions of America, Inc. www.necdisplay.com MultiSync ME Series Large Format Displays Page 5 of 19 Display Dimensions ME501 cont'd: NEC Display Solutions of America, Inc. NEC strongly recommends using size M6 screws (10-12mm + the thickness of the bracket and washers in length). www.necdisplay.com MultiSync ME Series Large Format Displays Page 6 of 19 Display Dimensions ME551: NEC Display Solutions of America, Inc. www.necdisplay.com MultiSync ME Series Large Format Displays Page 7 of 19 Display Dimensions ME551 cont'd: NEC Display Solutions of America, Inc. NEC strongly recommends using size M6 screws (10-12mm + the thickness of the bracket and washers in length). www.necdisplay.com MultiSync ME Series Large Format Displays Page 8 of 19 Display Dimensions ME651: NEC Display Solutions of America, Inc. www.necdisplay.com MultiSync ME Series Large Format Displays Page 9 of 19 Display Dimensions ME651 cont'd: NEC Display Solutions of America, Inc. NEC strongly recommends using size M8 screws (16-18mm + the thickness of the bracket and washers in length). www.necdisplay.com MultiSync ME Series Large Format Displays Page 10 of 19 NEC Display Solutions of America, Inc. Installing and Removing the Optional Table Top Stand The ME431, M501 and M551 use the ST-401 or ST-43M. The ME651 utilizes the ST-65M Only use the screws that are included with the optional stand. The ST-65M will need included stand holders to also be attached Table Top Stand Dimensions (ST-401 pictured below): www.necdisplay.com MultiSync ME Series Large Format Displays Page 11 of 19 NEC Display Solutions of America, Inc. Table Top Stand Dimensions (ST-65M): Note stand holder is included when stand is purchased but is not included in drawing below www.necdisplay.com MultiSync ME Series Large Format Displays Page 12 of 19 Optional Large Wall Mount (WMK-6598): NEC Display Solutions of America, Inc. 16.58 15.75 19.85 17.50 15.75 17.50 17.19 5.00 7.45 2.96 www.necdisplay.com MultiSync ME Series Large Format Displays Page 13 of 19 Optional Speaker Dimensions (SP-RM3a): NEC Display Solutions of America, Inc. www.necdisplay.com MultiSync ME Series Large Format Displays Page 14 of 19 NEC Display Solutions of America, Inc. Intel® Smart Display Module Integration: 1. Place the monitor face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily support the weight of the monitor. To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor's screen area, on the table before laying the monitor face down. Make sure there is nothing on the table that can damage the monitor. 2. Remove the SLOT COVER and the OPTION COVER. Note when using Intel® SDM-L type option board, slide the CENTER RAIL to the right and remove. Reverse the process to re-attach 3. Gently push in SDM-S or SDM-L module 4. Attach included Option Cover after installation of SDM device www.necdisplay.com MultiSync ME Series Large Format Displays Page 15 of 19 NEC Display Solutions of America, Inc. Compute Module Integration: Please see separate DS1-IF20CE installation guide for full integration. Image below may not represent actual back of unit but the concept is the same. Removing the OPTION COVER is necessary for installation Final installed DS-IF20CE with RPI CM4 below www.necdisplay.com MultiSync ME Series Large Format Displays Page 16 of 19 Input Panel: Bottom Side (Rotated) NEC Display Solutions of America, Inc. www.necdisplay.com MultiSync ME Series Large Format Displays Page 17 of 19 NEC Display Solutions of America, Inc. ASCII Common Commands: This monitor supports common ASCII control commands with many other NEC projectors. For more information on this, please see our website. PD Comms Tool Please download PD Comms Tool and open the Communications Log by going to View Communications Log. From here you can find any external control code necessary for your installation PD Comms Tool can be downloaded from here: https://www.sharpnecdisplays.us/faqs/pdcommstool/179 www.necdisplay.com MultiSync ME Series Large Format Displays Page 18 of 19 Cable Connection Communication Protocol: Interface: Communication System: Baud Rate: Data Length: Parity: None Stop Bit Communication Code: RS-232C Asynchronous 9600 bps 8 bits 1 bit ASCII NEC Display Solutions of America, Inc. Interface: Communication System: Communication Layer: IP Address: Port Number: Ethernet (CSMA/CD TCP/IP (Internet Protocol Suite) Transport layer (TCP) 192.168.0.10 (default out of box) 7142 (Fixed) Transmit Data+ Transmit DataReceive Data+ Not Used Not Used Receive DataNot Used Not Used Browser Control: Information and control can also be available through the HTTP browser control menu. In order to accomplish this, type: http://<the Monitor's IP address>/pd_index.html Note that the LAN Power needs to be turned on in order for the display to be controlled while the units are off. All displays are set to the IP address 192.168.0.10 out of the box unless changed through the initial setup guide Communicating network PC needs to be on the same subnet as display that is being communicated with www.necdisplay.com MultiSync ME Series Large Format Displays Page 19 of 19