GAMEsir Tarantula T3 Pro Multi-Platform Wireless Game Controller User Manual
Introduction
This document is the user manual for the GAMEsir Tarantula T3 Pro Multi-Platform Wireless Game Controller. It provides detailed information on setup, features, and operation across various devices.
Brand: GAMEsir
Model: T3 Pro
Official Website: https://www.gamesir.hk/
Support Email: service@gamesir.hk
FCC ID: 2AF9S-T3PRO
Package Contents
- GAMEsir Tarantula T3 Pro Controller
- USB Type-C Cable
- User Manual
Requirements
- Windows 10 or above
- Android 8.0 or above
- iOS 13 or above
- Nintendo Switch
- Bluetooth 4.0 or above
- Available USB port
Device Layout
Top View
The top of the controller features:
- Left Analog Stick
- Right Analog Stick
- D-pad (Directional Pad)
- Menu Button
- Share Button
- Capture Button
- LT Button (Left Trigger)
- LB Button (Left Bumper)
- RT Button (Right Trigger)
- RB Button (Right Bumper)
- Home Button
- NFC Touchpoint
Bottom View
The bottom of the controller features:
- USB Type-C Charging Port
- Indicator Light
Side View
The sides of the controller feature the LT and RT trigger buttons, and LB and RB bumper buttons.
Rear View
The rear of the controller has a Trigger Gear Switch to adjust the travel distance of the LT/RT buttons.
Basic Function Introduction
Connection Modes
The controller supports multiple connection modes, including wireless and wired connections.
Status of Indicator Light
The indicator light on the controller provides feedback on its status:
- Slow Blinking (e.g., Blue): Pairing mode or searching for connection.
- Solid (e.g., Blue): Connected to a device.
- Solid Red: Charging.
- Red Light Flashing: Low battery.
- Light Off: Device is off or fully charged (when plugged in).
Other Descriptions
- Battery Indicator: The controller's LED will flash red when the battery level is low.
- Dock Charging: When connected to a PC or console via the USB Type-C cable, the controller will charge.
- Auto-Off: The controller will automatically turn off after 10 minutes of inactivity to save power.
Channel Indicator Status
The indicator light can also show the connection status for different platforms:
| Indicator Status | DS4 Mode | Xbox Mode | NS Mode | Android Mode | Switch Mode |
|---|---|---|---|---|---|
DS4 (Solid Blue) |
Windows 10 or above | N/A | N/A | N/A | N/A |
Xbox (Solid Green) |
N/A | Windows 10 or above | N/A | N/A | N/A |
NS (Solid White) |
N/A | N/A | Nintendo Switch | N/A | N/A |
Android (Solid Cyan) |
N/A | N/A | N/A | Android 8.0 or above | N/A |
Switch (Solid Purple) |
N/A | N/A | N/A | N/A | Nintendo Switch |
Bluetooth Pairing (Slow Blinking Blue) |
Searching for device or in pairing mode | ||||
Wired Connection (Solid Light) |
Connected via USB Type-C cable | ||||
Connection Tutorials
Follow these steps to connect your controller to various devices.
Connecting to Windows
Wired Connection
- Connect the controller to your Windows PC using the provided USB Type-C cable.
- The controller will be recognized automatically.
Bluetooth Connection
- Turn on your controller by pressing the Home button.
- Press and hold the Home button + Y button simultaneously for 3 seconds until the indicator light flashes rapidly (indicating pairing mode).
- On your Windows PC, go to Bluetooth settings and search for devices.
- Select "T3 Pro" or "GAMEsir T3 Pro" from the list and pair.
- The indicator light will turn solid once connected.
- If the connection is unsuccessful, press the Home button for 2 seconds to reconnect.
Connecting to Nintendo Switch
Wired Connection
- Connect the controller to the Nintendo Switch dock using the USB Type-C cable.
- The controller will be recognized automatically.
Bluetooth Connection
- Turn on your controller by pressing the Home button.
- Press and hold the Home button + Y button simultaneously for 3 seconds until the indicator light flashes rapidly (indicating pairing mode).
- On your Nintendo Switch, navigate to System Settings > Controllers and Sensors > Change Grip/Order.
- Press and hold the Home button on the controller for 2 seconds to connect.
- The indicator light will turn solid once connected.
- If the connection is unsuccessful, press the Home button for 2 seconds to reconnect.
Connecting to Android Devices
Bluetooth Connection
- Turn on your controller by pressing the Home button.
- Press and hold the Home button + Y button simultaneously for 3 seconds until the indicator light flashes rapidly (indicating pairing mode).
- On your Android device, go to Bluetooth settings and search for devices.
- Select "T3 Pro" or "GAMEsir T3 Pro" from the list and pair.
- The indicator light will turn solid once connected.
- If the connection is unsuccessful, press the Home button for 2 seconds to reconnect.
Connecting to iOS Devices
Bluetooth Connection
- Turn on your controller by pressing the Home button.
- Press and hold the Home button + Y button simultaneously for 3 seconds until the indicator light flashes rapidly (indicating pairing mode).
- On your iOS device, go to Bluetooth settings and search for devices.
- Select "T3 Pro" or "GAMEsir T3 Pro" from the list and pair.
- The indicator light will turn solid once connected.
- If the connection is unsuccessful, press the Home button for 2 seconds to reconnect.
Advanced Tutorial
Macro Button Configuration
Assign custom macros to the M1 and M2 buttons.
- Press and hold the Menu button + View button simultaneously for 3 seconds. The indicator light will flash.
- Press the M1 or M2 button you wish to program. The indicator light will flash rapidly.
- Perform the desired button sequence (macro).
- Press the M1 or M2 button again to save the macro. The indicator light will return to its normal state.
- To clear a macro, repeat steps 1-2, then press and hold the M1/M2 button for 5 seconds.
Turbo Setting
Enable or disable the turbo function for buttons.
- Press and hold the Turbo button.
- While holding the Turbo button, press the desired button (A, B, X, Y, LT, RT) to enable/disable its turbo function.
- Turbo Speed Adjustment: Press and hold the Turbo button + D-pad Up/Down to increase/decrease turbo speed. There are 3 adjustable speeds.
Combination Buttons
Various functions can be activated by combining the M button (assumed to be the Turbo button) with other buttons.
| Button Combination | Description |
|---|---|
| M + LT | Activate/deactivate the turbo function for the LT button. |
| M + LB | Activate/deactivate the turbo function for the LB button. |
| M + RT | Activate/deactivate the turbo function for the RT button. |
| M + RB | Activate/deactivate the turbo function for the RB button. |
| M + Left Stick (Press Down) | Adjust vibration intensity (5 levels: 0, 25%, 50%, 75%, 100%). Press M + Left Stick Down to decrease, M + Left Stick Up to increase. |
| M + Right Stick (Press Down) | Adjust lighting effects (e.g., breathing, static, off). Press M + Right Stick Down to cycle through modes. |
| M + A | Increase the brightness of the lighting. |
| M + B | Decrease the brightness of the lighting. |
| M + X | Adjust the color of the lighting (e.g., Red, Orange, Yellow, Green, Cyan, Blue, Purple, White). Press M + X to cycle through colors. |
| M + Y | Turn lighting effects on/off. |
| M + Home | Adjust vibration intensity (5 levels: 0, 25%, 50%, 75%, 100%). Press M + Home Down to decrease, M + Home Up to increase. |
| M + Share | Adjust the turbo speed (3 levels: 5, 10, 20 shots/sec). Press M + Share Down to decrease, M + Share Up to increase. |
| M + Capture | Adjust the turbo speed (3 levels: 5, 10, 20 shots/sec). Press M + Capture Down to decrease, M + Capture Up to increase. |
| M + Menu | Reset the controller to default settings. |
Note: The specific button labeled 'M' for these combinations is assumed to be the 'Turbo' button based on common controller layouts and the context of turbo settings.
Sticks & Trigger Calibration
Calibrate the analog sticks and triggers for optimal performance.
- Press and hold the Home button + Capture button simultaneously for 3 seconds. The indicator light will flash.
- Follow the on-screen prompts or instructions within the GAMEsir Connect software to complete calibration.
- For manual calibration, you might need to move the sticks and triggers to their full range of motion.
Gyroscope Calibration
Calibrate the controller's gyroscope sensor.
- Press and hold the Home button + View button simultaneously for 3 seconds. The indicator light will flash.
- Place the controller on a flat surface. The calibration will complete automatically.
Download GAMEsir Connect Software
For advanced configurations, firmware updates, and more, download the GAMEsir Connect software.
Visit the official GAMEsir website or scan the QR code (if available) to download the software for your PC.
The software allows for detailed customization of button mapping, macro programming, lighting effects, and vibration settings.
Reset Controller
If the controller becomes unresponsive or you wish to reset it to factory defaults:
- Locate the small reset hole on the back or bottom of the controller.
- Use a thin, pointed object (like a paperclip) to gently press and hold the reset button inside the hole for approximately 5 seconds.
- The controller will reset. You may need to re-pair it with your device.
Important Precautions
⚠️ WARNING: Please read the following precautions carefully before using the controller to ensure safe and proper operation.
- Avoid exposing the controller to extreme temperatures (hot or cold), high humidity, or direct sunlight.
- Do not expose the controller to water or other liquids.
- Do not attempt to disassemble, modify, or repair the controller yourself. This can cause damage and void the warranty.
- Keep the controller away from children and pets. Small parts may pose a choking hazard.
- Avoid prolonged use at high vibration settings, as it may cause discomfort or fatigue. Take regular breaks.
- Do not use the controller if it appears damaged or is malfunctioning.
- Ensure the controller is used only for its intended purpose.
- Dispose of the controller responsibly according to local electronic waste regulations.
Electrical & Electronic Equipment Information
This symbol [WEEE Symbol] indicates that this product should not be disposed of with household waste. It must be handed over to a collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health.
Declaration of Conformity
This device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.
CE Marking indicates compliance with relevant EU directives.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Statement of Compliance with Directive
CE Marking indicates compliance with relevant EU directives.
