1. Introduction
Owing to its unique design, Ropox Support Washbasin provides additional support and easier access to the washbasin for wheelchair users and walking-impaired persons. The manual height adjustment facilitates frequent adjustment of the washbasin to suit several users. The height adjustment range of the adjustable models is 30cm/11.8in.
The ample space for knees and legs makes the washbasin ideal for wheelchair users, who obtain optimum mobility and a perfect working position.
The integrated grab handles facilitate access and allows the user to get close to the washbasin.
⚠️ This manual must ALWAYS accompany the product and be read by and available to the user
Correct use, operation and inspection are decisive factors for effective and safe performance. The manual must always be available to the user and must accompany the product in case of relocation.
2. Conformity with EU Directives
This product has CE marking and is thus in accordance with the basic requirements concerning functionality and safety according to the current Machinery Directive. All models of Ropox Support Washbasin are manufactured in accordance with the current requirements of Directive No. 93/42/EEC concerning Medical Devices and belong to the lowest risk class 1.
3. Application
Ropox Support Washbasin Basic and Manual may be adjusted in height for optimum working height for user and carer. Ropox Support Washbasin must NOT be used as a lifting table or person lifter.
The product is designed for indoor use under normal room temperature and humidity as specified in Section 4.
3.1 Operation
Basic height adjustment (applying to 40-44012/13)
The height of the washbasin may be adjusted by loosening the two handles. Note that the washbasin must be supported while loosening the handles in order to prevent it from falling to the bottom position. Covers, if any, must be removed before adjustment of these models.
Diagram Description: A diagram shows a washbasin mounted on a support structure with two side handles. Arrows indicate that loosening these handles allows the washbasin to be moved up or down.
Manual height adjustment (applying to 40-44014/15)
The height of the washbasin may be easily adjusted by means of the detachable hand crank.
Diagram Description: A diagram shows a washbasin mounted on a support structure with a detachable crank mechanism. Arrows indicate that turning the crank adjusts the height of the washbasin.
4. Technical Data
Product name: Ropox Support Washbasin
| Item number | Name | Illustration Description |
|---|---|---|
| 40-44010 | Fixed (left) | A top-down view of the washbasin and countertop, fixed in position, with a faucet. |
| 40-44011 | Fixed (right) | A top-down view of the washbasin and countertop, fixed in position, with a faucet. |
| 40-44012 | Basic height adjustment (left) | A side view showing the washbasin and countertop supported by two adjustable legs, with handles for height adjustment. |
| 40-44013 | Basic height adjustment (right) | A side view showing the washbasin and countertop supported by two adjustable legs, with handles for height adjustment. |
| 40-44014 | Manual height adjustment (left) | A side view showing the washbasin and countertop supported by two adjustable legs, with a crank mechanism for height adjustment. |
| 40-44015 | Manual height adjustment (right) | A side view showing the washbasin and countertop supported by two adjustable legs, with a crank mechanism for height adjustment. |
Adjustment range: 30 cm (71-101cm)/ 11.8in (28 – 39.8in)
Mixer tap options: Standard: Oras Saga; Standard with auxiliary lever: Oras Saga + auxiliary lever; Disabled mixer tap: Damixa Clover Easy; No-touch mixer tap: Oras Electra 6250F
Materials:
Frame: Welded steel pipes St. 37
Washbasin: Aluminium alloy 606045-T6, Various plastic components, Synthetic/marble composite, Vacuum-shaped ABS
Cover: (Material not specified)
Surface treatment: Powder coating, RAL 9010 matte white, chromite, gel coat
Max. load: Tested in accordance with DS/ISO 17966:2016, max user weight is 400kg/881lb
Temperature: 10-40° C / 50-104° F
Air humidity: 5-85% (non-condensing)
Complaint: See Complaint page 15
Manufacturer: Ropox A/S, DK-4700 Næstved, Phone: +45 55 75 05 00, e-mail: info@ropox.dk, www.ropox.dk
5. Dimension Sketches
Fixed 40-44010/11
Diagram Description: Shows overall dimensions for fixed models. Width: 1000mm (39.4in), Depth: 633mm (24.9in), Height: 166mm (6.5in).
Basic height adjustment 40-44012/13
Diagram Description: Shows overall dimensions for basic height adjustment models. Width: 1000mm (39.4in), Depth: 633mm (24.9in). The sketch shows a lower height of 518mm (20.4in) with leg length of 577mm (22.7in).
Manual height adjustment 40-44014/15
Diagram Description: Shows overall dimensions for manual height adjustment models. Width: 1000mm (39.4in), Depth: 633mm (24.9in). The sketch shows a lower height of 580mm (22.8in) with leg length of 657mm (25.9in).
Accessories – covers 40-44021/22
Diagram Description: Shows dimensions for accessory cover panels. Height: 550-850mm (21.7-33.5in), Width: 653mm (25.7in), Depth: 273mm (10.7in) at top, 125mm (4.9in) at bottom, 90mm (3.5in) projection.
6. Recommended Positioning of Water and Drain
Fixed and Basic height adjustment
Diagram Description: A side view illustrating the recommended placement of water supply pipes and drain pipes relative to the wall and the washbasin's adjustable legs for fixed and basic height adjustment models. Dimensions are provided for pipe placement and hose connections.
Manual height adjustment
Diagram Description: A side view illustrating the recommended placement of water supply pipes and drain pipes relative to the wall and the washbasin's adjustable legs for manual height adjustment models. Dimensions are provided for pipe placement and hose connections.
We recommend positioning of water and drain installations as illustrated. It is important that all hoses for water and drain installations are flexible to ensure unhindered movement of the frame within the height adjustment range from 71-101 cm/28 – 39.8in (including washbasin).
Drain may also be positioned in the floor.
It is recommended to position the fixed water intake on the wall so that it points downward at a height of max. 50 cm/19.7in from the floor. This ensures positioning of the flexible hoses close to the wall without folds. A 90° valve with 1½" thread is recommended.
6.1 Connection Adapters
The highlighted components can be bought separately depending on the type of building installation requirements.
Water supply
| Hoses from basin | Adapters | Installation in room (not included) |
|---|---|---|
| 1/2" | No adapter necessary | 1/2" Thread |
| 1/2" -> 3/8" Item no. 97001670 |
3/8" Thread | |
| 1/2" -> 15mm Item no. 97001666 |
15mm/1/2" Pipe |
Water hose extensions
| Hose from basin | Coupling piece | Extra hose |
|---|---|---|
| 1/2" -> 1/2" Item no. 97001662 |
1/2" x 1/2", 0,5m, steel Item no. 97001123 |
|
| 1/2" x 1/2", 1m, plastic Item no. 97001120 |
Drain
| Drain pipe from basin | Adapters | Installation in room (not included) |
|---|---|---|
| Ø32 | No adapter necessary | Ø32/ |
| Ø32 -> Ø40 Item no. 97001660 |
Ø40 | |
| Ø32 -> Ø50 Item no. 97001661 |
Ø50 |
Drain pipe extensions
| Drain pipe from basin | Coupling piece | Extra drain pipe |
|---|---|---|
| Ø32 | Ø32-Ø32 Item no. 97001662 |
Ø32 Flex hose, 27-62cm/10.6-24in Item no. 97001162 |
| Ø32 Flex hose, 40-110cm/16-43in Item no. 97001161 |
7. Mounting Instructions and List of Components
See separate Mounting Instructions.
NOTE: When mounting screws in the wall, always consider the strength and nature of the wall. The screws provided are only intended as a guide for installation on a reinforced wall with a view to the maximum screw loads specified in the Mounting Instructions.
8. Performance Test
After completed installation and before use, all functions of the Ropox Support Washbasin must be tested. After that, a performance test must be carried out at least once a year by competent personnel.
- Check that the mounting instructions have been observed.
- Check that all bolts and screws have been tightened.
- Check that all drains and hoses have been correctly connected.
- Ensure that there is no load on the frame.
- Ensure that there are no objects preventing the frame from moving freely within the height adjustment range.
When these tests have been carried out successfully, Ropox Support Washbasin is ready for use. See Section 9 "Safety in use”.
9. Safety in Use
- Ropox Support Washbasin must only be adjusted in height by persons who have read and understood these instructions.
- Some models of Ropox Support Washbasin are height-adjustable and must not be used as a lifting table or person lifter.
- Always use the washbasin in a manner excluding the risk of damage to persons or property. The person operating the washbasin is responsible for avoiding damage or injury.
- If the washbasin is used in publicly accessible locations where children or persons with reduced observation capacity may get near it, the person operating the washbasin must pay attention to those present in order to prevent dangerous situations.
- Make sure that there is free space above and below the washbasin to allow height adjustment.
- Do not overload Ropox Support Washbasin and make sure that the load distribution is correct.
- Do not operate the washbasin in case of defects or damage.
- Modifications, which may influence the performance or design of Ropox Support Washbasin, are not allowed.
- Installation, service and repairs must be carried out by competent personnel.
- During inspection, service or repairs any load must be removed from Ropox Support Washbasin.
10. Service and Maintenance
10.1 Cleaning
During use, the product may get dirty. It is very important to clean the product as described in these instructions.
Wipe Ropox Support Washbasin with a wrung cloth with lukewarm water and a mild detergent. Do not use enchants, abrasives or grinding cloths, brushes and sponges.
10.2 Cleaning of tabletop and washbasin
Ropox Support Washbasin is made of a composite material of marble and plastic granulate with a gel coat surface. This gives a hard and very hardwearing finish, which is easy to clean. Wash the surfaces daily with water and dry with a cloth. Do not use detergents containing hard abrasives – e.g. steel wool, scouring powder or sulphuric acid.
If the water has high calcium content, calcareous deposits will often occur. These deposits should be removed at least once a week by using a detergent containing citric acid, acetic acid or phosphoric acid. Leave the detergent to work for 5 to 10 minutes depending on the thickness of the deposits and clean thoroughly with a soft scouring sponge.
Disinfection of the basin may be done with household spirits.
10.3 Inspection
ℹ️ Inspections, service and repairs must be carried out by competent personnel
The frame of Ropox Support Washbasin is maintenance-free. Moving parts have been lubricated for life. For reasons of safety and reliability, we recommend inspection of the frame once a year.
Annual inspection:
- Check that all bolts and screw have been securely tightened.
- Check that the frame moves freely and without problems from bottom to top position.
- Check that water hoses and drain hoses are tight and functional.
After each inspection, complete the service schedule. See Section 10.5.
⚠️ Only use Ropox original spare parts for replacement. If other spare parts are used, the whole guarantee may become void.
10.4 Service Schedule
Service and maintenance Serial No.: ____________________
Date: ____________________ Signature: ____________________ Comments: ____________________
Service and maintenance Serial No.: ____________________
Date: ____________________ Signature: ____________________ Comments: ____________________
Service and maintenance Serial No.: ____________________
Date: ____________________ Signature: ____________________ Comments: ____________________
Service and maintenance Serial No.: ____________________
Date: ____________________ Signature: ____________________ Comments: ____________________
11. Fault Finding
a) The frame seems loose or unstable
- The assembly screws of the frame have not been securely tightened.
- Retighten all screws of the frame according to the mounting instructions.
b) The washbasin cannot be adjusted in height / adjustment is very difficult
- Check that there are no jammed objects preventing adjustment.
c) It takes too long for the water to leave the washbasin
- Check the siphon for clogging and clean it, if required.
- Check that the flexible hose on the wall has not been positioned so high that it acts as an extra siphon. Cf. recommendation, Section 6.
12. List of Spare Parts
Handle M6
Item No. 96000177
Applies to 40-44012/13 only
Diagram Description: Illustration of a Handle M6.
Hand crank
Item No. 20-60320-548
Applies to 40-44014/15 only
Diagram Description: Illustration of a Hand crank.
13. Optional Extras
Water and drain kit
Item No. 40-44020
Excl. of mixer tap
Diagram Description: Illustration of a Water and drain kit.
Cover plate kit, left
Item No. 40-44021 (Applies to Fixed and Basic models)
Item No. 40-44027 (Applies to Manual model)
Diagram Description: Illustration of a left cover plate kit.
Cover plate kit, right
Item No. 40-44022 (Applies to Fixed and Basic models)
Item No. 40-44028 (Applies to Manual model)
Diagram Description: Illustration of a right cover plate kit.
Mixer tap Oras Saga
Item No. 40-44040
Diagram Description: Illustration of the Oras Saga mixer tap.
Auxiliary lever for Oras Saga mixer tap
Item No. 40-14680
Diagram Description: Illustration of an auxiliary lever for the Oras Saga mixer tap.
Mixer tap, Damixa Clover Easy
Item No. 40-44044
Diagram Description: Illustration of the Damixa Clover Easy mixer tap.
No-touch mixer tap, Oras Electra 6250F
Item No. 40-44045
Diagram Description: Illustration of the Oras Electra 6250F no-touch mixer tap.
Ropox overflow plug
Item No. 40-40935
Diagram Description: Illustration of a Ropox overflow plug.
14. Label
Each unit has a label of its own as illustrated. This label contains important information to be stated in connection with inquiries to the supplier. For positioning of the label, see drawing of spare parts.
Diagram Description: Illustration of the product label. It shows:
- Manufacturer: ROPOX A/S, Denmark 4700 Næstved
- Contact: Phone: 55750500, Fax: 55750550
- Date: 2012-12
- Product: Ropox Support Washbasin, Manual Right-oriented
- Item No: 40-44015
- Max load: 200 KG/440lbs
- SERIAL NO: N10-XXXX
- Symbols: CE, ⚠️, ♻️
Symbols:
- ⚠️ The user manual must be read before use.
- ♻️ Waste must be sorted – if possible, for recycling.
- [Manufacturer] Ropox is the manufacturer of the product in question.
- CE marking. This product meets the requirements for General Safety and Functionality of the current EU Directives and Standards.
15. Complaint
See General Terms of Sale and Delivery on www.ropox.dk
ROPOX A/S
Ringstedgade 221
DK - 4700 Næstved
Tel.: +45 55 75 05 00 Fax.: +45 55 75 05 50
E-mail: info@ropox.dk
www.ropox.dk