VIDEX Wall-and-Ceiling-Mounted LED Light Fitting

Technical Parameters [P]

Box Contents [B]

• B1: LED light fitting
• B2: Mounting dowels with screws
• B3: Locking screws
• B4: Hexagonal screwdriver
• B5: User manual
• B6: Packaging

Mounting [M]

Read this user manual before installation. Installation must be performed by a qualified specialist. Ensure power supply is disconnected before starting any work. Complete installation according to the provided diagrams. Wiring should be done using the built-in terminal block. Verify mechanical fastening and connection correctness before first use. The product must be used in a network meeting legal energy requirements and quality standards.

Mounting Diagrams:

• M1 (MA): Shows basic wiring for VL-BHD01-09*** models, connecting Live (L) and Neutral (N) terminals.
• M2 (MB): Shows basic wiring for VL-BHD02-09*** models, connecting Live (L) and Neutral (N) terminals.
• M3: Illustrates the physical mounting screw locations for the fitting.
• M4 (MA): Depicts wiring for specific color temperatures (2400K, 2800K) for VL-BHD01 models.
• M5 (MB): Depicts wiring for specific color temperatures (2400K, 2800K) for VL-BHD02 models.
• M6 (MA): Depicts wiring for specific color temperatures (3200K, 4000K) for VL-BHD01 models.
• M7 (MB): Depicts wiring for specific color temperatures (3200K, 4000K) for VL-BHD02 models.
• M8 (MA/MB): Depicts wiring for specific color temperatures (4300K, 6000K) for both VL-BHD01 and VL-BHD02 models.

Functional Characteristics

The product is suitable for both indoor and outdoor use.

Maintenance and Safety Instructions

Always turn off the power supply before performing any maintenance. Ensure the product is cooled down and dry. Clean only with soft, dry cloths. Do not use chemical or abrasive cleaning agents. Do not cover the product; ensure adequate air circulation. The product may reach high temperatures during operation. CAUTION: Do not look directly into the LED beam. Use only the rated voltage or voltage within the specified range. Do not use the product if the light diffuser, screen, protective cover, wiring, or connection points are damaged. Avoid using the product in adverse conditions such as vibration, explosive atmospheres, or exposure to fumes. The LED light source and control gear are non-replaceable. If the light source reaches the end of its service life or is damaged, the entire product must be replaced. Disassembling the light source or control panel will cause permanent damage and void the IP rating. Do not attempt self-repair, as this may void the warranty. Failure to follow these instructions may result in fire, burns, electric shock, injury, or other damages. The producer is not liable for damages resulting from non-compliance.

Storage and Transportation

Before delivery, store the product in its original packaging at temperatures between -20°C and +40°C in a dry room, away from direct sunlight. Transportation can be by land, sea, or air in the manufacturer's transport packaging.

Warranty

The warranty period is indicated on the individual packaging and begins from the date of sale. During the warranty period, faulty products can be exchanged or returned with proof of purchase and all components/accessories intact. The limited warranty does not cover misuse, unauthorized disassembly, deep mechanical damage, or damage due to force majeure.

Compliance

The product complies with the technical regulations of Ukraine.

The product meets the requirements of EU directives.

Environmental Protection

It is forbidden to dispose of the product together with general waste. A used or damaged product should be disposed of in accordance with the Directive on Waste Electrical and Electronic Equipment (WEEE). Contact your local recycling organization for more details.