RORRY D2 5000mAh Portable Apple Watch Power Bank

Product Introduction

A portable power bank with a 5000mAh capacity, designed to charge Apple Watches, iPhones, and AirPods. It features a built-in Lightning cable, a built-in USB-C cable, and a USB-C input/output port. The device also includes a keychain for portability.

Dimensions: 64mm x 90mm

Package Includes

• Power Bank * 1
• USB-C Cable * 1
• User Manual * 1

Product Information

Function

Power Button Description

1. Power On: To charge your Apple Watch, press the on/off button at the bottom of the power bank to activate it.
2. Power Off: Double-click the switch at the bottom to turn off the power bank and stop current output. The power indicator light will turn off.

LED Indicator Description

• The LED indicator lights up when powered on and turns off when powered off.
• One LED light indicates 25% power. The power bank automatically shuts down if there is no load for 40 seconds.
• When charging the power bank, four blue indicators light up sequentially.
• When charging a device, four blue indicators light up one by one and then go out.

Note: Normal charging is only possible when the output voltage is between 4.6V and 5.5V.

Charging Method

1. Charging iPhone/AirPods: Use the built-in Lightning cable for iPhone 14 and below, or the built-in USB-C cable for iPhone 15 and other devices. You can also use the USB-C port at the bottom.
2. Charging Apple Watch: Press the on/off button at the bottom to activate the power bank, then place your Apple Watch on the magnetic wireless charger.
3. Charging Other Devices: Use the built-in USB-C cable or connect a USB-C to USB-C cable (included) to the USB-C port.

Q & A

Q: Can't Charge My Apple Watch

A:

1. Press the on/off button at the bottom of the power bank to activate it.
2. Check the remaining power by observing the power indicator.
3. If the issue persists, please contact support.

Q: Is it normal for the power bank to get slightly warm during use?

A: Slight heating due to efficiency losses in the conversion circuit is normal. The temperature of this RORRY Power Bank meets the temperature limits of the UL2056 certification standard.

Q: Why is my power bank providing fewer charges than expected?

A: Capacity reduction during charging is due to a 30% to 45% energy loss in battery cells and conversion circuitry. A fully charged 5000mAh RORRY Power Bank offers an estimated 2800mAh to 3000mAh to power devices.

Q: Can the power bank charge iPhone, Apple Watch, and AirPods simultaneously?

A: Yes, but the charging speed will be slightly slower than charging devices individually.

Notes

Please read the usage and attentions carefully before using the product:

1. Do not scratch the shell with sharp objects, and avoid throwing, shaking, pushing, or disassembling the product.
2. Check compatibility before use.
3. Do not expose the product to water, fire, or extreme temperatures.
4. Keep out of reach of children.
5. Do not use chemicals or related objects to clean the product.
6. RORRY is not responsible for damage caused by improper usage or placement.

Contact Us

For FAQs and more information, please visit:

• Email: support@rorry.com
• Website: www.rorry.com
• Phone: +1 (850) 465-7001
• Social Media: @RORRYUS
• Linktree: linktr.ee/RORRYOfficial

Manufacturer:

Shenzhen Xianyang Innovation Technology Co., Ltd

Address: Rm302, Bldg. 8, Yunli Intelligent Park, No.7 Changfa Middle Road, Bantian Street, Longgang District, Shenzhen

UK Representative:

Name: GSG CONSULTING GROUP LIMITED

Address: Montague houses unit 3 Matthew street, Manchester m12 5bb

Email: GSG--GROUP@outlook.com

Tel: +44 7850 387628

Certifications: CE, FCC

Made in China

FCC Compliance Information

FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.