EKVIP String Light

Safety Instructions

• Do not connect the product to a power point while the product is still in the pack.
• Intended for indoor and outdoor use.
• Check that no light sources are damaged.
• Do not connect two or more string lights together electrically.
• No parts of the product can be replaced, or repaired. The whole product must be discarded if any part is damaged.
• Do not use sharp or pointed objects during assembly.
• Do not subject the power cord or wires to mechanical stress. Do not hang objects on the string light.
• This is not a toy. Be careful if using the product near children.
• Disconnect the transformer from the power point when the product is not in use.
• This product must only be used together with the supplied transformer and must never be connected directly to the mains supply without a transformer.
• The product is not intended to be used as general lighting.
• Recycle products that have reached the end of their useful life according to local regulations.

Symbols

• ? Read the instructions.
• ?️ Safety class II.
• ✅ Approved in accordance with the relevant directives.
• ♻️ Recycle discarded product in accordance with local regulations.

Technical Data

Usage

1. Remove the product from the packaging.
2. Hang up the product in the required place.
3. Insert the plug into the mains power supply.

Warning

The product must only be used when all the seals are correctly fitted.