M5STACK AtomS3R Highly Integrated Programmable Controller User Guide
File info: application/pdf · 7 pages · 1.01MB
Users Manual 3
M5Stack Technology Co.,Ltd M5ATOMS3R M5AtomS3R 2AN3WM5ATOMS3R 2AN3WM5ATOMS3R m5atoms3r
Extracted Text
M5AtomS3R Model: AtomS3R 2024 CONTENTS 1.OUTLINE ..................................................................................................................... 3 1.1. AtomS3R.............................................................................................................3 2. SPECIFICATIONS....................................................................................................... 4 2.1.Product Size....................................................................................................... 5 3. QUICK START............................................................................................................6 3.1. SCAN Wi-Fi........................................................................................................ 7 3.2 SCAN BLE Device.............................................................................................. 8 4. FCC Warning..............................................................................................................10 1. OUTLINE AtomS3R is a highly integrated programmable controller based on the ESP32-S3 microcontroller. It integrates the ESP32-S3-PICO-1-N8R8 main controller, WiFi and BLE functionality, 8MB onboard FLASH, and 8MB PSRAM; a 0.85-inch IPS screen; a programmable button below the screen; an internal 5V to 3.3V circuit; a BMM150 magnetometer and BMI270 accelerometer and gyroscope; an onboard Type-C interface for power supply and firmware downloading; a HY2.0-4P expansion port; six GPIO and power pins at the bottom for easy expansion. The product size is only 24*24*12.9mm, making it suitable for various embedded intelligent device applications. 1.1. ATOMS3R 1.Communication Capabilities: Main Controller: ESP32-S3-PICO-1-N8R8 Wireless Communication: Wi-Fi (WIFI), BLE Functionality Infrared Transmission: Infrared transmitter for infrared control interaction Expansion Interface: HY2.0-4P interface, supports connection and expansion of I2C sensors 2.Processor and Performance: Processor Model: Xtensa LX7 (ESP32-S3-PICO-1-N8R8) Storage Capacity: 8MB Flash, 8MB PSRAM Processor Operating Frequency: Xtensa� dual-core 32-bit LX7 microprocessor, up to 240 MHz 3.Display and Input: Screen: 0.85-inch IPS screen Button: Programmable button below the screen 4. Sensors: Magnetometer: BMM150 Accelerometer and Gyroscope: BMI270 5.GPIO Pins and Programmable Interfaces: Grove Interface: Supports connection and expansion of I2C sensors Bottom Pins: Power and 6 GPIO pins 6. Others: Onboard Interface: Type-C interface for programming and serial communication Physical Dimensions: 24*24*12.9 mm, with an M2 screw hole on the back for fixation 2. SPECIFICATIONS MIC CE FCC Parameter and Specification MCU Communication Capability Supply Voltage Flash Storage Capacity PSRAM Storage Capacity Screen Sensors Button Expansion Interface Dimensions Operating Temperature Wi-Fi Working Frequency BLE Working Frenquency Wi-Fi Working Frequency Wi-Fi Transmit Power BLE Working Frenquency BLE Maximum EIRP Wi-Fi Working Frequency Wi-Fi Maximum Conducted Peak Output Power BLE Working Frenquency BLE Maximum Conducted Peak Output Power Rated Current Manufacturer Manufacturer address Value ESP32-S3-PICO-1-N8R8 @ Xtensa dual-core 32-bit LX7, 240MHz Wi-Fi,BLE,OTG/CDC function, infrared emitter, I2C sensor expansion 4.5~5.5V DC 8MB-Flash 8MB-PSRAM 0.85-inch IPS screen, GC9107 driver, resolution 128*128 BMM150 magnetometer, BMI270 accelerometer and gyroscope 1 user button HY2.0-4P interface for connecting and expanding I2C sensors 24 * 24 * 12.9 mm -10�C to 40�C 802.11b/g/n20:2412 MHz-2472 MHz 802.11n40:2422 MHz-2462 MHz 802.11b:2484 MHz 2402MHz-2480MHz 802.11b:2412 MHz-2472 MHz 802.11g:2412 MHz-2472 MHz 802.11n-HT20:2412 MHz-2472 MHz 802.11n-H40:2422 MHz-2462 MHz 802.11b:17.27dBm 802.11g:16.82dBm 802.11n-HT20:16.17dBm 802.11n-H40:16.22dBm 2402MHz-2480MHz 5.52dBm 2412 MHz-2472 MHz (802.11b,g,n-HT20) 2422 MHz-2462 MHz(802.11n-H40) 21.76dBm 2402MHz-2480MHz(BLE 1M/2M) 8.71dBm 0.5A M5STACK TECHNOLOGY CO., LTD. 501, Tangwei Business Building, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen, China 2.1 Product Size 3. QUICK START 3.1. Print WiFi information 1. Open Arduino IDE (Refer to https://docs.m5stack.com/en/arduino/arduino_ide for the installation guide for the development board and software) 2. Press and hold the reset button for 2 seconds until the green light turns on 3. Select the ESP32S3 DEV Module board and the corresponding port, then upload the code 4. Open the serial monitor to display the scanned WiFi and signal strength information 3. QUICK START 3.1. Print BLE information 1. Open Arduino IDE (Refer to https://docs.m5stack.com/en/arduino/arduino_ide for the installation guide for the development board and software) 2. 2. Press and hold the reset button for 2 seconds until the green light turns on 3. 3. Select the ESP32S3 DEV Module board and the corresponding port, then upload the code 4. 4. Open the serial monitor to display the scanned BLE and signal strength information 4. FCC Warning FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The SAR was tested for the device in the body worn mode, and it can meet the SAR limit of FCC.
m5-docs