MOONLIGHT Lighting Fixtures

Product Series by EGOLUCE

Models: 4572, 4582, 4583, 4573, 4620

Material and Finishing

The raw white MDF disc included with these fixtures is designed to be painted, decorated, or coated. Its special finish allows it to be painted with standard water-based paints commonly used for interior decoration.

Installation Instructions

The following diagrams illustrate the installation process for different MOONLIGHT models. Ensure power is disconnected before proceeding. Installation should be performed by qualified personnel. ⚠️

General Mounting Components (Applicable to most models)

Mounting Bracket (labeled '1')
Wire Connectors (labeled '2')
Screws (labeled '3')
Wall Plugs (labeled '4')

Models: 4572, 4582, 4583 (Wall/Ceiling Mounting)

Step A: Attach the mounting bracket (1) to the ceiling or wall.
Step B: Connect the electrical wires (2) using the provided connectors.
Step C: Secure the fixture to the bracket (3).

Model: 4573 (Wall Mount Only)

Step A: Attach the mounting bracket (4) to the wall.
Step B: Connect the electrical wires (1, 2) using the provided connectors. Note the "1 push" mechanism for one connection.
Step C: Secure the fixture (3) to the bracket.

Model: 4620 (Wall Mount Only)

Step A: Attach the mounting bracket (1) to the wall. A separate component (4) may also be part of the initial mounting.
Step B: Connect the electrical wires (2) using the provided connectors.
Step C: Secure the fixture (1) to the mounting bracket (4) using screws (2, 3). Connect the electrical wires (5), noting the "1 push" mechanism.

Product Specifications

Model	Diameter	Frequency	Voltage	Wattage
4572	50 cm	50/60Hz	220-240V	15W
4573	70 cm	50/60Hz	220-240V	24W
4582	50 cm	50/60Hz	220-240V	15W
4583	70 cm	50/60Hz	220-240V	24W
4620	88 cm	50/60Hz	220-240V	33W

Safety and Compliance

Energy Efficiency: This product contains an LED light source of energy efficiency class F. (EU2019/15) ?
Mounting Surface: This fixture is suitable for mounting on normally inflammable surfaces. ?
Electrical Safety: Installation and maintenance must be performed by qualified personnel only. Always disconnect the power supply before performing any operation on the equipment. Keep these instructions for future reference. ⚠️

Environmental Disposal

WEEE Symbol (RAEE): The RAEE symbol (Waste Electrical and Electronic Equipment) indicates that this product should not be treated as household waste. Proper disposal helps protect the environment. For recycling information, contact your local authority, waste disposal service, or the retailer where the product was purchased. ♻️

	Egoluce Art. 5241 MUSA DIM LED Installation and Safety Guide Detailed installation, safety, and technical information for the Egoluce Art. 5241 MUSA DIM LED lighting fixture, including dimming options (DALI, Push, 1..10V).
	EGOLUCE Mork Sistema Art. 1506 Installation Guide and Specifications Comprehensive guide to installing and configuring the EGOLUCE Mork Sistema lighting fixture (Art. 1506). Includes geometric and linear setup examples, connector mounting, system regulation, and safety instructions.
	Egoluce Art. 0207 Lighting Fixture Installation Guide & Product Specs Comprehensive installation guide and product details for Egoluce lighting fixtures, including the Art. 0207 series and models like Art. 6690, 6691, 6692, and 6693. Covers safety precautions, step-by-step mounting instructions, and technical specifications for various drivers and configurations. Manufactured in Italy.
	Egoluce SOLCO MAXI Lighting Fixture - Specifications and Installation Guide Detailed information on the Egoluce SOLCO MAXI lighting fixture, including product variants, dimensions, and step-by-step installation instructions for plasterboard.
	Egoluce 0532 Lighting Fixture Installation Guide Step-by-step assembly and installation instructions for the Egoluce 0532 lighting fixture. Includes diagrams and essential information for proper setup.
	ANACONDA System 48V Fixing Accessories Installation Guide \| EGOLUCE Detailed installation instructions and specifications for ANACONDA system 48V fixing accessories, including suspension kits and various clips, from EGOLUCE.
	Egoluce Art. 0232 Installation Guide for Brick Walls Comprehensive installation instructions for the Egoluce Art. 0232 lighting fixture, detailing safety precautions and step-by-step procedures for installation in brick walls using a recess box. Includes technical specifications and manufacturer information.
	Egoluce Lancia Tonda 1578 Ø 400cm LED Lighting Fixture Installation Guide Comprehensive installation and assembly guide for the Egoluce Lancia Tonda 1578 LED pendant light. Covers safety, assembly steps, electrical connections, and dimming options for this 400cm diameter fixture.