Tuda Slatted Cladding Installation Guide
Introduction
Thanks to TUDA's effort, the new style slatted cladding developed by the team has applied an innovative and sophisticated installation method. It has considered the detailed design of the main components which avoid damage caused by material expansion and shrinkage due to temperature fluctuations. Each component from TUDA's slatted cladding system has been put much attention on the innovation of design to make it more elegant and durable.
Important Notes
READ BEFORE STARTING INSTALLATION
Before starting any work, we recommend that you read these instructions and familiarise yourself with all the components, the options available and the method of installation that you are going to use. All diagrams and instructions in this guide are for illustration purposes and are not meant or intended to replace a professional installer. Any work undertaken with TUDA products must be in accordance with any building regulations required. The consumer assumes all risks and liability that may or may not be associated with the use of this product.
Safety
Prior to commencing any construction work, ensure that you have the appropriate safety wear and equipment to avoid any risk of injury.
Tools
Woodworking tools may be used. We recommend that any cutting blades used have a carbide tip. We recommend all screws and fixings to be stainless steel or adequately coated and fit for outdoor use.
- Jig Saw
- Hand Drill
- Tape Measure
- Set Square
- String line
- Spirit Level
- Protective eye wear and relevant Personal Protection Equipment (PPE)
- Pencil
Construction
We recommend that prior to any work, a plan of the work is done to ensure the best possible looking cladding for your project and to ensure that you have all the required components to enable you to complete the installation. Door and window apertures should be finished off with the appropriate trims to suit the respective installation.
Installation Overview
There are various ways that TUDA slatted cladding can be installed. This installation guide gives an overview of some typically used methods and installation guidelines.
Installation Steps
Step 1
Diagram A: Shows a panel of TUDA slatted cladding.
Diagram B: A close-up view indicating a measurement of 500mm on the cladding panel.
Step 2
Diagram E: Illustrates a drill pre-drilling holes into the cladding panel.
Diagram F: Shows a drill screwing a fixing into the cladding panel. Text label: 'Pre-drill'.
Diagram G: Depicts a cladding panel being slid into place, with an arrow indicating the direction of insertion.
Diagram H: A close-up view of the panel edges, showing how they interlock or fit together.
Diagram I: Shows a completed section of TUDA slatted cladding.
Diagram J: Illustrates a drill screwing a fixing into the top edge of the installed cladding.
Step 4
Diagram J: Shows a completed section of TUDA slatted cladding, indicating the final appearance.
Contact Information
TUDA GRASS - T&A UPHOLSTERY SUPPLIES LTD
Address: Units 46/47 Stakehill Industrial Estate, Touchet Hall Road, Middleton, M24 2FL
Tel: 0161 696 0078
Email: sales@tudagrass.co.uk