UCTRONICS Assembly Instruction
SKU: U603001
Product Website: www.uctronics.com
Packing List
The following components are included in the package:
- 1. Upper cover
- 2. Lower cover
- 3. Truss head screw (2 pieces)
- 4. Flat head screw (2 pieces)
- 5. Time delay relay module
- 6. Button cap (3 pieces)
Assembly Steps
Follow these steps to assemble the UCTRONICS U603001 Time Delay Relay Module:
Step 1: Mount the Timer Module
Mount the timer module on the lower cap. Fix it in place with the truss head screws.
[Diagram: Illustrates the time delay relay module being placed onto the lower cover, with arrows pointing to screw holes where truss head screws are inserted.]
Step 2: Install Button Caps
Turn the upper cap upside-down. Insert the button caps into the round cutouts on the inner surface of the upper cap.
[Diagram: Shows the upper cover inverted. Arrows indicate placing three button caps into circular cutouts on the inner surface of the upper cover.]
Step 3: Assemble Enclosure Halves
Keep the upper cap upside-down. Align it with the lower cover and assemble the two halves of the enclosure together.
[Diagram: Depicts the inverted upper cover being joined with the lower cover, showing how the two halves of the enclosure connect.]
Step 4: Secure the Enclosure
Fix the upper cap and lower cap together using the flat head screws.
[Diagram: Shows the assembled enclosure with arrows indicating the insertion of flat head screws into the final mounting points.]
