ECOLAB Typhoon / Dual

General Safety and Operating Instructions

• The machine must only be operated by instructed personnel.
• Follow the instructions from the supplier of detergents.
• Always wear suitable clothing and footwear.
• Never direct the water jet towards people, pets, or electric installations.
• Never block the release of the spray handle.
• Always activate any locking device on the spray handle when replacing nozzles.
• Only use the water from the system for cleaning purposes.

Note: An Atlantic 450 spray handle is shown as an illustration.

Preparation Steps

Start/Preparing: Rinsing

Preparing: Foaming

Operational Procedures

Changing Cleaning Agent

The process involves replacing the cleaning agent bottle. Visuals depict: 1. Removing the current cleaning agent bottle. 2. Connecting a new cleaning agent bottle. The system indicates to allow flow for over 20 seconds.

Disinfection using P3-User Pack

To disinfect, connect the P3-User Pack to the system. Then, operate the spray handle as instructed.

Stopping the Procedure

To stop the procedure: 1. Disconnect the cleaning agent hose. 2. Return the spray handle to its holder. The system indicates to allow flow for over 20 seconds.