PREVIDIA-C-COM Serial and IP Module Interface

Model: PREVIDIA-C-COM

Certifications: EN 54-2, EN 54-4, EN 54-21, EN 12094-1, EN IEC 62368-1

Introduction

The PREVIDIA-C-COM is a serial and IP module interface designed for advanced control and communication systems. It provides essential connectivity for integrating various devices and networks.

Technical Specifications

Specification	Value
Power Supply Voltage	19 / 30 V
Current Draw	40 mA
Operating Temperature	-5°C / 40°C
SD Card Capacity	32 Gbyte
Max RS485 Current (Imax RS485)	200 mA

Electrical Connections

The PREVIDIA-C-COM module features multiple connection interfaces for integration into systems:

RS485-2: Terminals for +24V, A2, B2, GND. Supports End-of-Line (EOL) termination (120 Ohm).
RS232-2: Terminals for TXD2, RXD2, GND.
RS485-1: Terminals for +24V, A1, B1, GND. Supports End-of-Line (EOL) termination (120 Ohm).
RS232-1: Terminals for TXD1, RXD1, RTS, GND, CTS.
Ethernet: Terminal type ES1, PS1.

Important Safety Warning: This device is not designed for mains power (220V) or battery operation. ⚠️ NO 220V! NO BATTERY! ❌

The module is compliant with EN IEC 62368-1 safety standards, including isolation class requirements for Ethernet (ES1, PS1), RS485 (ES1, PS2), and RS232 (ES1, PS1) terminals.

Wiring the Board: Detailed wiring diagrams illustrate the connection points for RS485 and RS232 interfaces, including shield/ground connections and cable management (sleeve/shield/huls).

Safety and Compliance

EU Declaration of Conformity: INIM Electronics S.r.l. declares that the PREVIDIA series products comply with the essential requirements and other relevant provisions of Directive 2014/53/EU. This product may be used in all EU countries.

WEEE (Waste Electrical and Electronic Equipment) Disposal: The crossed-out bin symbol ?️ on the equipment or packaging indicates that the product must be disposed of separately from general household waste at the end of its working life. Users should return the equipment to appropriate civic collection points for electrical and electronic waste. Alternatively, it can be returned to dealers when purchasing equivalent new equipment. Retailers with sales areas of at least 400m² can accept small electronic waste products (under 25cm) free of charge. Proper separate collection for recycling and environmentally compatible disposal helps prevent negative environmental and health effects and promotes reuse and recycling of materials.

Documentation and Support

Declarations of Performance, Declarations of Conformity, and Certificates concerning INIM Electronics S.r.l. products can be downloaded free of charge from the website www.inim.it. Access the reserved area and select "Certifications".

Manuals can also be downloaded free of charge from the website www.inim.it by accessing the reserved area and selecting "Manuals".

Download Links: QR codes are provided on the product documentation for downloading specific information in various languages (Italian, English, French, Spanish, Portuguese, Dutch).