StarTech SM2DUPE11 SATA Drive Duplicator and Secure Eraser User Guide
File info: application/pdf · 2 pages · 336.94KB
Product Diagram (SM2DUPE11) Package Contents
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to ra…
Buy StarTech.com Standalone M.2 SA .. | SM2DUPE11
Manufacturer PDF Manual
StarTech.com Standalone M.2 SATA & M.2 NVMe Duplicator and Eraser Manufacturer PDF Specifications
Extracted Text
Quick-Start Guide 1 to 1 NVMe/SATA Drive Duplicator and Secure Eraser Product Diagram (SM2DUPE11) Front View 1 2 Package Contents � Duplicator Dock x 1 � SATA Drive Extensions Cable x 2 � Anti-Slip/Vibration Pads x 2 � Universal Power Adapter x 1 9 � Regional Power Cords (NA, JP, EU, UK, ANZ) x 5 � Quick-Start Guide x 1 3 Top Edge View 4 5 6 8 7 Product Information For product information, technical specifications, manuals, and Declarations of Conformance please visit: www.startech.com/SM2DUPE11 *Product may vary from photos Product Requirements � M2 SATA/NVMe SSD x 2 � 2.5"/3.5" SATA Drive x 2 Installation Power the Drive Duplicator and Secure Eraser 10 Component 1 LCD Display 2 2.5"/3.5" SATA Drive Connector 3 M.2 Drive Connector 11 *Product may vary from photos Function � Displays Menu options, status, and details � Connect a source 2.5"/3.5" SATA Drive � Connect a source M.2 SATA or NVMe Drive 1. Connect the Universal Power Adapter to the appropriate Regional Power Cord. 2. Connect the Universal Power Adapter to the Power Connector on the Drive Duplicator and Secure Eraser. 3. Connect the Regional Power Cord to a Power Source. 4. Toggle the Power Switch to the ON (I) position. 4 M.2 Drive Connector � Connect a target M.2 SATA or NVMe Drive Connect a 2.5"/3.5" SATA Drive 5 Drive-Tray Screw /Drive -Tray Screw Hole � Secures the Drive Tray Note: Do not connect drives directly into the Hard Drive Duplicator and Secure Eraser, as it puts undue strain on the device connectors. 6 Rubber Drive Holder 7 2.5"/3.5" SATA Drive Connector 8 LED Indicators � Secures the M.2 SATA or NVMe Drive � Connect a target 2.5"/3.5" SATA Drive � Indicates Drive Status 1. Connect the Drive Connector Cable(s) to 2.5"/3.5" SATA Drive(s) and to the 2.5"/3.5" SATA Drive Connector(s) on the Drive Duplicator and Secure Eraser. 2. Place the Drive Duplicator and Secure Eraser on the Anti-Slip/Vibration Pads (included). 9 LCD Display Buttons 10 Power Switch 11 Power Connector � Navigate through the LCD Display Note: Avoid placing drives directly on a metal surface. � Toggle ON (I) or OFF (O) Connect M.2 SATA or NVMe Drive � Connect the Universal Power Adapter To view manuals, FAQs, videos, drivers, downloads, techn1ic.alDdertaewrminignse, tahnedsmizeoroef,tvhiesiMt w2w. SwA.TstAarotrecNhV.cMoemD/sruivpep(os)r.t. To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support. Manual Revision: April 26, 2021 10:15 AM 2. Remove the Drive-Tray Screw, using a Phillips Head Screwdriver. 3. Adjust the position of the Rubber Drive Holder to the appropriate position on the Drive Tray. 4. Insert the Drive-Tray Screw through the screw hole in the Drive Tray and tighten, using a Phillips Head Screwdriver. Do not over-tighten. 5. Gently slide the Connector on the M2. SATA or NVMe Drive(s) at a 30-degree angle into the corresponding M2. SATA or NVMe Drive Connector(s) on the Drive Duplicator and Secure Eraser. Note: The Connector on the M2. SATA or NVMe Drive(s) is keyed so that it only fits one way. 6. Lightly push the M2. SATA or NVMe Drive(s) down, ensuring the Rubber Drive Holder connects with the mounting notch on the M2. SATA or NVMe Drive(s). Operation Copy a Drive Note: The Drive Duplicator and Secure Eraser is capable of 1 to 1 duplication from M.2 to SATA, SATA to M.2, SATA to SATA, and M.2 to M.2 drives. 1. Navigate to the Setup LCD Display, using the LCD Display Buttons, and press the Enter Button. 2. Navigate to the Copy Area LCD Display and press the Enter Button. 3. Select a Copy Mode and press the Enter Button. 4. Navigate back to the Main Menu. 5. Select Copy and press the Enter Button. Warning! Do not disconnect either drive or interrupt the process until the copy process has completed. Doing so may result in damage to the drive or lost data. 6. When the Green LED Indicator is no longer flashing and has become solid the copying process is complete. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: � Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. � Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user's authority to operate the equipment. Industry Canada Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil num�rique de la classe [B] est conforme � la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le pr�sent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autoris�e aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radio�lectrique subi, m�me si le brouillage est susceptible d'en compromettre le fonctionnement. Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only Erase a Drive Warning! Backup data prior to erasing any drives. 1. Navigate to Erase Mode and press the Enter Button. Warning! Do not disconnect the drive until erase process has completed. Doing so may result in damage to the drive or lost data. 2. When the Green LED Indicator is no longer flashing and has become solid the erasing process is complete. Erase and Copy Modes Mode Quick erase Full erase DoD3 Pass DoD 3 Pass+Compare 7-Pass Erase Secure Erase Enhanced Secure Erase Copy system and files Copy all partitions Copy the whole HDD Copy a percentage Definition Erase modes The partition table is quickly erased Erases entire device(s), complying with NIST 800-88 Standards. Erases device(s), complying with DoD 5220.22-M Standards. Erases device(s), complying with DoD 5220.22-M Standards and verifies complete erasure. Erases device(s) 7 times complying with DoD 5220.22-M(ECE) Standards. Erases the non-loadable areas complying with NIST 800-88 Standards. Erases devices that supports this feature. Copy modes Only the data area of the 2.5"/3.5" SATA Drive is copied and the empty space isn't copied. The partition areas of the HDD are copied and the nonpartition, empty space isn't copied. The entire HDD is copied, including empty space. A specified percentage range of the HDD is copied. and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders. PHILLIPS� is a registered trademark of Phillips Screw Company in the United States or other countries. Warranty Information This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you. Safety Measures � If product has an exposed circuit board, do not touch the product under power. StarTech.com Ltd. 45 Artisans Crescent London, Ontario N5V 5E9 Canada StarTech.com LLP 4490 South Hamilton Road GroveConnector, Ohio 43125 U.S.A. StarTech.com Ltd. Unit B, Pinnacle 15 Gowerton Road Brackmills, Northampton NN4 7BW United Kingdom StarTech.com Ltd. Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands FR: startech.com/fr DE: startech.com/de ES: startech.com/es NL: startech.com/nl IT: startech.com/it JP: startech.com/jp