Universal Sensor Mounting Bracket

Product Overview

The Universal Sensor Mounting Bracket is designed to securely mount Solar Radiation or UV sensors. It facilitates the installation of the sensor using the provided hardware and accompanying manual.

Installation Hardware

The bracket is installed using the following included hardware:

• Two 1½" U-bolts
• Three each: spacers, #6 split washers, 6 X 32 x 3/8" machine screws
• Four each: ¼-20 nuts, ¼" split lock washers, ¼" flat washers

Mounting Diagram Description

The diagram illustrates the assembly process. A central mounting plate forms the base. A sensor, identified as "Solar Radiation or UV Sensor & Mounting Hardware (not included)", is positioned above the plate. A "Spacer" is shown connecting the sensor's base to the mounting plate. The mounting plate attaches to a vertical pole using two "1 ½" U-Bolt" fasteners. Various screws, nuts, and washers are depicted for securing the components: "¼-20 Nut", "¼" Split Lock Washer", "¼" Flat Washer" are used with the U-bolts, while "6 x 32 x 3/8" Machine Screw" and "#6 Split Lock Washer" are used to attach the sensor assembly to the bracket, possibly via the spacer.