JALL K6 White Noise Sound Machine Sunrise Alarm Clock User Manual

Welcome to the JALL Family

JALL is dedicated to improving sleep quality. We have helped over 1,000,000 families achieve better rest and aim to make sleeping easier and waking up more comfortable with our innovative, all-in-one products suitable for all ages.

Product Overview

The JALL K6 is a versatile device combining a White Noise Sound Machine and a Sunrise Alarm Clock. It features multiple light modes, natural and white noise sounds, Bluetooth connectivity, and a sleep timer.

Device Features

The device includes:

• Time Display
• Alarm Indicator
• AM/PM Indicator
• Light Indicator
• Sounds Indicator
• Bluetooth Indicator
• Snooze Indicator
• Sleep Timer Indicator

Device Controls and Ports

Top Controls:

• Sunrise Button: Activates sunrise simulation settings.
• Alarm Switch: Toggles alarm on/off.
• Dimmer Button: Adjusts time display brightness.
• Light Control Roller: Controls light brightness.
• Solid Light Switch: Toggles solid color light mode.
• RGB Light Switch: Toggles RGB mood light mode.
• Snooze Button: Activates snooze function or confirms settings.
• Bluetooth Switch: Toggles Bluetooth on/off.
• Sleep Timer Switch: Toggles sleep timer.
• Volume Control Roller: Adjusts volume.
• White Noise Switch: Toggles white noise sounds.
• Natural Sounds Switch: Toggles natural sounds.
• Time Set: Enters time setting mode.

Rear Ports:

• USB Charging Output 5V1A: For charging external devices.
• Type-C Input 5V2A: For powering the device.
• 5W Stereo HiFi Speaker: For sound output.

Getting Started

First Use

1. Connect to Power: Connect the AC adapter to the Type-C input port on the device and plug the other end into a 100-240V home socket.
2. Placement: Place the device in a cool, dry area, approximately 16-20 inches from your head, such as on a bedside table. Clean with a soft, damp cloth; avoid liquid or abrasive cleaners.
3. Battery: The device includes a pre-installed CR2032 battery for backing up settings during power failure. AC power is required for operation.
4. Warranty: The device comes with a lifetime warranty. To activate, contact JALL via email with your order number.

Time Settings

Setting the Time

The simplest method is via Bluetooth synchronization with your smartphone. Refer to the "Bluetooth Mode" section for details.

Manual Time Setting:

1. 12H/24H Format: Press and hold the [TIME SET] button for 2 seconds. The "12H" or "24H" indicator will flash. [ROTATE] to select the desired format, then [CONFIRM] to confirm. The "Hour" indicator will flash.
2. Hour Setting: [ROTATE] to select the hour. [CONFIRM] to confirm. The "Minute" indicator will flash.
3. Minute Setting: [ROTATE] to select the minute. [CONFIRM] to confirm. The "Mon-Sun" indicator will flash.
4. Day of Week Setting: [ROTATE] to select the current day of the week. [CONFIRM] to exit.

Display Dimmer

The time display has 5 brightness levels (L0-L4), with L0 being off and L4 being the brightest. L3 is the default. Click the [DIMMER] button to cycle through levels L0-L4.

• When the alarm sounds, the display automatically increases to L4 for better visibility.
• If set to L0 before bed, it restores to L3 when the alarm ends.

Alarm Settings

Use the [Alarm Switch] and [SNOOZE] buttons for alarm setup.

Setting the Alarm Time

1. Hour: Press and hold the [ALARM] button for 2 seconds. The "Hour" indicator flashes. [ROTATE] to set the hour, then [CONFIRM]. The "Minute" indicator flashes.
2. Minute: [ROTATE] to set the minute, then [CONFIRM]. The Alarm Sounds code (e.g., A01) will flash.

Alarm Sounds

[ROTATE] to select alarm sound (A01-A08 or OFF). [CONFIRM] to confirm. The Alarm Volume will flash.

Note: Setting alarm to OFF means the alarm will not sound and will skip volume/mode settings.

Alarm Volume

[ROTATE] to set alarm volume (V01-V16). [CONFIRM] to confirm. The Alarm Mode will flash.

Alarm Mode

[ROTATE] to select alarm mode: Mon-Sun (Daily Mode), Mon-Fri (Weekday Mode), Sat-Sun (Weekend Mode). [CONFIRM] to exit.

Sunrise Setting

Configure sunrise simulation:

1. Dawn Duration: Click the [SUNRISE] button to select dawn duration (0/10/20/30/40/50/60 Minutes). The dawn duration is the time it takes for the light to gradually brighten before the alarm.
2. Wake-up Light Brightness: Press and hold [SUNRISE] for 2 seconds. [ROTATE] to set brightness (L01-L20 or OFF). [CONFIRM] to exit.

Snooze and Stop Alarms

Snooze Function: After the alarm sounds, click [SNOOZE] to snooze. The alarm will reappear after 9 minutes (infinite snoozes possible).

Snooze Settings:

1. Snooze Duration: Press and hold [SNOOZE] for 3 seconds. [ROTATE] to set duration (5-20 mins). [CONFIRM] to confirm.
2. Light On/Off During Snooze: [ROTATE] to choose if the light stays on (ON) or turns off (OFF) during snooze. [CONFIRM] to exit.

Stopping the Alarm: When the alarm goes off, you have 3 options:

1. Press and hold [SNOOZE] for 3 seconds.
2. Click [ALARM] once.
3. Do nothing: Alarm sound turns off automatically after 30 minutes (light stays on). Light turns off automatically after 60 minutes.

Disabling Alarm Completely: When the alarm is active, the Alarm indicator appears. To disable completely, click [ALARM]; the indicator will disappear. Click [ALARM] again to reactivate.

Light Modes

The device offers 17 colorful lights: 8 solid colors and 9 RGB mood lights.

Solid Light

1. Turn On: Click the [SOLID LIGHT] button. Click again to change colors. Available colors: Red, Orange, Pink, Green, Blue, Indigo, Purple, Grey.
2. Brightness: Use the [LIGHT +] / [LIGHT -] roller to adjust brightness (20 levels).
3. Turn Off: Press and hold [SOLID LIGHT] for 2 seconds.

RGB Mood Light

1. Turn On: Click the [RGB] button. Click again to cycle through RGB modes (C01-C09).
2. Brightness: Use the [LIGHT +] / [LIGHT -] roller to adjust brightness (20 levels).
3. Turn Off: Press and hold [RGB] for 2 seconds.

Note: For RGB modes C08/C09, if connected via Bluetooth to a phone, the light can follow the rhythm of the music.

Audio Features

Bluetooth Mode

Connect to your smartphone via Bluetooth to sync time and play audio.

1. Turn On: Click the [BLUETOOTH] button. A voice prompt "Bluetooth on" will play, and the indicator will flash.
2. Pairing: Enable Bluetooth on your smartphone. Scan for devices and select "K6". A "Paired successfully" prompt will play, and the indicator will become steady.
3. Playback: Click [CONFIRM] to pause/play. [ROTATE] to play previous/next song.
4. Turn Off: Press and hold [BLUETOOTH] for 2 seconds.
5. Clear Pairing History: Press and hold [CONFIRM] and [BLUETOOTH] together for 3 seconds. The current connection will be disconnected, and the indicator will flash.

Note: Bluetooth connection syncs device time with your phone's, reducing discrepancies.

White Noise

The device offers 10 built-in white noise sounds.

1. Turn On: Click the [WHITE NOISE] button.
2. Volume: Use the [VOLUME +] / [VOLUME -] roller to adjust volume.
3. Switch Sounds: [ROTATE] to switch to previous/next white noise. Click [WHITE NOISE] to switch to the next sound.
4. Turn Off: Press and hold [WHITE NOISE] for 2 seconds.

White Noise Sound Sources: Oceanwaves Background Noise, Fan Noise, TV Background Noise, White Noise 1, White Noise 2, Wind Noise, Brown Noise 1, Brown Noise 2, Pink Noise, Heart Beat.

Natural Sounds

The device offers 15 built-in natural sounds.

1. Turn On: Click the [NATURAL SOUNDS] button.
2. Volume: Use the [VOLUME +] / [VOLUME -] roller to adjust volume.
3. Switch Sounds: [ROTATE] to switch to previous/next natural sound. Click [NATURAL SOUNDS] to switch to the next sound.
4. Turn Off: Press and hold [NATURAL SOUNDS] for 2 seconds.

Natural Sounds Sources: Gentle Waves, Campfire, Thunderstorm, Rain, Summer Night, Birds, Stream 1, Stream 2, Crickets 1, Crickets 2, Wind Chimes, Church Bells, Lullaby 1, Lullaby 2, Lullaby 3.

Additional Features

Sleep Timer

The Sleep Timer is a countdown timer adjustable from 10 to 480 minutes (8 hours). It allows independent adjustment of light and sound features during the countdown.

1. Turn On: Click the [SLEEP TIMER] button. [ROTATE] to adjust the timer duration (10-480 minutes).
2. Adjust Lights & Sounds: Refer to the Light, Bluetooth, and Sounds sections (Pages 14-19) for methods to adjust or turn off these features within the sleep timer.
3. Turn Off: Click [SLEEP TIMER] to view remaining time. Press and hold [SLEEP TIMER] for 2 seconds to exit.

Some Tips

• Night Light/Reading Light: Click [SNOOZE] to turn on the night light. Use [LIGHT +] / [LIGHT -] to adjust brightness. Click [SNOOZE] again to exit. Note: Night light cannot be activated via [SNOOZE] button in Bluetooth mode.
• Time Display Brightness: Adjust using the [DIMMER] button (5 levels, L0-L4).
• USB Output: The 5V1A USB output port can charge smartphones and tablets. Avoid connecting high-power devices to prevent risks.

Support and Warranty

Frequently Asked Questions (FAQ)

Q: This appliance doesn't work at all.

1. Ensure the adapter is properly plugged into the wall outlet.
2. Verify the power supply by connecting another device.
3. If issues persist, contact JALL support via email.

Q: How can I turn the alarm sound off once it has gone off?

Refer to the "Stopping the Alarm" section (Page 19).

Q: The timing of my device is not accurate.

Allowable error is ± 30 seconds per month. Connecting via Bluetooth to your smartphone syncs the device's time, reducing discrepancies. Refer to Pages 16-17.

Q: Can I make it so that only the light comes on, not the alarm?

Yes, in alarm settings, select "OFF" for the alarm sound. The device will light up at the set alarm time without sound. Refer to Pages 9-11. Note: Light and sound cannot be set to "OFF" simultaneously.

Q: How can I completely turn off the time display?

Adjust the brightness using the [DIMMER] button, including turning it off (L0). Refer to Page 8.

Q: Do I need to register this product for the warranty to be valid?

JALL offers a lifetime warranty. It is recommended to contact them via email upon receiving the product to finalize warranty registration.

Q: Can I completely turn off the alarm so it won't ring any more?

Yes, click the [ALARM] button to completely turn off the alarm. Refer to Page 13.

Q: Why didn't my alarm go off?

1. Ensure the Alarm indicator is on (Page 13).
2. Check that the Alarm Mode Setting is correct (Page 10).
3. Verify the alarm is set correctly (e.g., AM/PM error, Page 9).
4. If issues persist, contact JALL support via email.

Q: I received a product that was damaged/missing part/scratched/dirty.

JALL provides a lifetime warranty for swift resolution. Contact them via email with your order number to activate the warranty and ensure service quality.

Product Warranty Card