1Step 1: Initial Assembly

Visual Description: The illustration shows a single horizontal panel and two rectangular legs that form the base structure of the steps.

Instructions: Install panel, rectangular legs, and 2 long square tubes.

2Step 2: Adding First Tier

Visual Description: The base structure from Step 1 is depicted with an L-shaped leg assembly and another horizontal panel being added on top, creating a second level.

Instructions: Install the L-shaped legs and panels.

3Step 3: Completing Tiers

Visual Description: The structure from Step 2 is further built upon with additional panels and L-shaped legs, forming a three-tiered step assembly.

Instructions: Install the remaining panels and L-shaped legs.

4Step 4: Attaching Short Side Bars

Visual Description: The three-tiered step structure is shown with short support bars being attached to the sides of the steps.

Instructions: Installation of short bars on the side of the stairs.

5Step 5: Attaching Long Side Bars

Visual Description: The structure from Step 4 is depicted with longer support bars being attached to the sides of the steps, completing the main frame.

Instructions: Installation of long bars on the side of the stairs.

6Step 6: Adding Handrails and Mats

Visual Description: The completed step structure is shown with handrails being attached to the sides. Anti-slip mats are also depicted being placed onto the step surfaces.

Instructions: Installation of handrails on both sides, place the anti-slip mats on the step panels.