holders.fr
StarTech.com | IT Pro's Trusted Source for Connectivity Accessories
StarTech.com Support
User Guide for StarTech com models including: ST121WHDS2 Wireless HDMI Extender, ST121WHDS2, Wireless HDMI Extender, HDMI Extender, Extender
StarTech.com ST121WHDS2
StarTech.com ST121WHDS2 AV extender AV transmitter & transceiver Black View PDF
File Info : application/pdf, 2 Pages, 198.62KB
DocumentDocumentQuick-Start Guide HDMI Over Wireless Extender - 4K 60Hz - 50m (165ft) Product ID ST121WHDS2 Transmitter 1 2 3 4 5 Receiver 6 7 8 3 1 2 3 4 6 9 8 3 Component 1 LED Indicators 2 Channel Select Button 3 Antenna Connectors 4 Update Port Function · Refer to LED Chart · Press to change Wireless Channels · Press and Hold for 5 sec to initiate Pairing · Press and Hold for 10 sec to Restore Default Settings · Connect the included Wireless Antennas · Transmitter/Receiver: For manufacturer use only 5 HDMI Input 6 HDMI Output · Connect to an HDMI Source Device · Connect to an HDMI Display 7 IR Output Port · Connect the IR Blaster to the Transmitter 8 DC Power Input 9 IR Input Port · Connect the included Universal Power Adapter · Connect the IR Receiver to the Receiver Product Information For the latest product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/ST121WHDS2 Requirements · HDMI Source Device x 1 · HDMI Display x 1 · HDMI Cables x 2 · (Optional) Local HDMI Display x 1 · (Optional) Phillips Head Screwdriver for Mounting x 1 Package Contents · Wireless Transmitter x 1 · Wireless Receiver x 1 · IR Blaster x 1 · IR Receiver x 1 · Wireless Antenna x 4 · Universal Power Adapter (NA/EU/UK) x 2 · Mounting Kit x 2 · Set of Rubber Feet x 1 · Quick-Start Guide x 1 To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support. Manual Revision: March 8, 2024 Installation (Optional) Mounting Kit Note: Before mounting the HDMI Extender make sure that the surface you are mounting to is strong enough to support the HDMI Extender. It is recommended that the HDMI Extender is mounted on a wall stud to provide the correct support. 1. Determine the Mounting Surface for the Transmitter and Receiver. 2. Place the Mounting Brackets beside the Transmitter and Receiver. Align the Holes in the Mounting Brackets with the Holes on the sides of the Transmitter and Receiver. 3. Insert two Screws through each Mounting Bracket and into the HDMI Extender. 4. Tighten each Screw using a Phillips Head Screwdriver. 5. Mount the HDMI Extender to the desired Mounting Surface using the appropriate Mounting Hardware (e.g. Wood Screws). Install the Transmitter and Receiver 1. Position the Wireless Transmitter and Receiver near the HDMI Source and Display. 2. Connect an HDMI Cable (not included) from the HDMI Source to the HDMI Input Port on the Wireless Transmitter. 3. (Optional) Connect an HDMI Cable (not included) from the HDMI Output Port on the Transmitter to an available HDMI Input Port on a Local HDMI Display. 4. Connect an HDMI Cable (not included) from the HDMI Output Port on the Receiver to an available HDMI Input Port on the Remote HDMI Display. 5. Connect the included Power Adapters from an available Wall Outlet to the Transmitter and Receiver. Note: There are only 4 wireless channels available. If there are already 4 paired Extender Kits in the area, one must be removed/disconnected. (Optional) Installing the IR Blaster and IR Receiver Control the HDMI Source Device from the Receiver's location 1. Connect the IR Blaster (Labelled "IR Out") to the IR Output Port on the Transmitter. 2. Peel the Film off of the Adhesive Pad that is located on the IR Blaster. Position the IR Blaster so that it is pointing directly at the IR Sensor on the HDMI Source Device. Note: Consult the HDMI Source Device's manual to determine the location of the IR Sensor. 3. Connect the IR Receiver (Labelled "IR In") to the IR Input Port on the Receiver. 4. Peel the Film off of the Adhesive Pad that is located on the IR Receiver. Position the IR Receiver in a location where there is a clear path to the Remote Control. 5. Use the Remote Control for the HDMI Source Device to control the HDMI Source Device from the Receiver's location. LED Chart LED Indicator Power Indicator Wireless Connection Indicator HDMI Signal Transmission Indicator Function Solid Blue: Unit is Receiving Power Solid Orange: Wireless Connection Established Quick Flash: Wireless Pairing Mode Slow Flash: Waiting for Wireless Connection Solid Orange: HDMI Signal is transmitting Quick Flash: Restoring to Default settings Off: No HDMI Signal detected Regulatory Compliance FCC - Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user's authority to operate the equipment. Industry Canada Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Warranty Information This product is backed by a two year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you. Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders. StarTech.com Ltd. 45 Artisans Cres London, Ontario N5V 5E9 Canada StarTech.com LLP 4490 South Hamilton Road Groveport, Ohio 43125 U.S.A. StarTech.com Ltd. Unit B, Pinnacle 15 Gowerton Rd, Brackmills Northampton NN4 7BW United Kingdom StarTech.com Ltd. Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands FR: startech.com/fr DE: startech.com/de ES: startech.com/es NL: startech.com/nl IT: startech.com/it JP: startech.com/jp